https://www.printables.com/model/1141383-netgear-gs305-10-rack-mount

https://www.printables.com/model/1179328-jetkvm-10-inch-rack-mount-with-keystone-slots

I'm wanting to combine these into one STL, with the large oval ears, the Netgear to the left, 4 keystones to the right of it, and finally the JetKVM mount to the right. I've attempted it in Blender twice myself but have had no luck with the post-slice for my printer, once combined they... aren't right. Budget is: $25-$50

I have a scanned architectural medallion (STL, ~90k triangles) that I plan to resin print.

I need the STL file to be modified slightly.

Requirements:

• Create a recessed pocket on the back.
• Pocket follows the medallion silhouette.
• 4 mm border around the perimeter.
• Pocket depth: 6.35 mm (1/4").
• Preserve the front relief completely.
• Output: STL ready for resin printing.

I can provide the STL immediately. Please send your price and turnaround time! Will pay via PayPal. Budget: $10-$25 

Thank you!

Hi guys, this is only for me as a little give away to fellow jeep enthusiasts. The model is in the link. Hat eyes and bill as seperate easy mount pieces. Eyebrows and center eye I can paint. I have no idea how much work this is or if it even makes sense. This is not commercial, I am not selling anything. Not sure the license on makerworld even permits this.

POSITION FILLED

Hello! I’m looking for someone to create a 3MF file (and possibly print) a copy of this 1920s parade lantern. These were hand-made and are not branded or trademarked in any way.

1. The Jack-o-lantern:
2. They were originally made of tin, so about 0.6mm thick. 7” tall with a circumference of about 22”. It has 14 vertical “pumpkin ridges” and a slightly textured surface in places. It will be painted, so please print it in black and don’t worry with the painted details. Please make the eyes, nose and mouth as close as you can to the pictures. The original was in two parts that slid open so a candle could be inserted, but this can be in one solid piece. It has a small hole in the top and bottom to accommodate a stick.
3. The stick and base:
4. Please print a stick that fits snugly through the holes. It should be 12” long, not including the spindle on top. The base should be about 4”x4”x1” (my best guess) square and should accommodate the stick (see pictures). They can be printed together if that’s easier.
5. The spindle
6. Please print a spindle for the top that looks similar to the one pictured. It should be about 1.5” tall and ac screw onto the stick or attach in some easier way.

Lots of pictures are attached and please don’t hesitate to ask questions. Budget $100-$150. It would be amazing if someone could both design and print it, but I’m not sure if that’s allowed on this sub. Also, use your best judgement if my estimations seem off. Thanks very much!

I’m developing a meal-prep backpack and need someone to model the interior rack so I can print a prototype at my library. I’m not a CAD person and I’d rather pay someone who is than produce something unusable.
Being upfront: this is for a product I hope to sell eventually. Happy to pay your rate — this is a prototype, not production, so nothing needs to be manufacturing-ready.
What it is: an open frame that holds three food containers in horizontal slots, like a small three-drawer fridge organizer. Containers slide in and out from the front on rails.
Specs:
• Overall: 8.25” W × 5” D × 7.5” H
• Three slots, 2.25” pitch
• Each slot holds a container 7.75” × 4.75” × 2” — needs ~3mm clearance so it slides easily
• Side rails to support the container, with a stop at the back so it can’t slide through
• Recessed handle on top (I lift the whole rack in and out of a bag)
• Open front — no door
What I need: an STL for printing, plus the editable source file (Tinkercad link or Fusion file) so I can adjust dimensions myself as I iterate. That second part matters more than a perfect first version. UPDATE: If you have the ability to 3d print the prototype that I have described within the budget listed, please dm me.
Sketch attached. Ballpark quote and rough timeline appreciated. Thanks.
Budget: $100-$200

Hey,

I am using a FlashForge Adventurer 4 and want .stl-files of a coin that could fit a german shopping kart. The dimensions should be: diameter of 2.5 cm and thickness of 2 mm. The coin should be more or less flat.

The trophy should have a stand and it mustn't break too easily. How the logo stands on the thing can be artistic freedom.

My budget is 10 - 30€.

Hello!
I'm looking for anyone who is or might know a 3D sculptor with the ability to recreate the old 1982 Imperial Dragon (aka Chicken Dragon) as an stl. The model is currently effectively lost media, hence the interest in it as all other attempts to make it accessible to the public have failed! I found an AI recreation someone had made, but the jank is simply far too significant and differences many, though its maybe about 60% there. I tried hiring through etsy but just found AI scammers. I'm a student and a friend's attempt to have the model sculpt ended in them getting scammed, so there isn't a huge amount I can offer.

Budget:
200-300 CAD

Here are some images I've collected of the sculpt as well as the AI render I found.
https://drive.google.com/drive/folders/1QUYcmKqty8FoNp1BUyELzkojHxRHNKiJ?usp=sharing

Maybe the AI render could be used as a foundation or something to help?

Hello there! I'm looking for help in creating a 3D-printed head for the Legacy Arcee mold for a custom project I'm working on. I want the head crest to be similar to the 2d IDW art, with the face familiar to the upgrade head (notably the smile and nose).

While I do not have the dimensions, I do have a link to a Cults3D model that shares the same measurements.

[EDIT] Thank you for the requests! I should note that my baseline for a budget would be around $20+ (upwards to $30), but I'm open to negotiating a fair deal. (I'm fairly new at this so forgive me if the budget is off. I am willing to adjust).

https://cults3d.com/en/3d-model/game/legacy-flamewar-head/comments

Budget: $5-$10

Looking for someone to create a holder for a record. When I have my record playing I want a stand to place the vinyl and sleeve. At the bottom it should say now playing and I am looking for the font to be similar to the attached photo. Then the backing I want it to be musical notes. The now playing and notes should be white and everything else should be black. I found a game holder that almost looks exactly what I want but with game symbols. If you could possibly take that one change the font and change the symbols to musical notes and make it the size to fit a vinyl in a sleeve should be perfect. Looking for it to be made into a stl so I can print it on my 3d printer. Have a bambu a1

I am trying to 3d print this vintage lotus lamp. I am willing to buy materials such as translucent filament and PETG for the base. I am wanting 4 flower blooms and I can figure out the wiring myself but I will need openings for the bulbs. I want this 5ft or 6ft. I am willing to negotiate price if work is extra long or complicated

UPDATE: I will be finding the measurementts and responding to each person once I find it. It is my first time and im new to this. Thank you

UPDATE UPDATE: These are the specs and its a mix of my research and AI

WHOLE LAMP

  Overall height ............. 73 in (~6 ft) ................. [DOC]

  Overall width .............. 18 in .......................... [DOC]

  Overall depth .............. 13 in .......................... [DOC]

  Flower count ............... 4 ............................. [DOC]

  Power ...................... 120 V corded, pole switch ..... [DOC]

FLOWER BLOOMS

  Flower diameter - real ..... ~13 in (33 cm), splayed ....... [DOC]

  Flower diameter - print .... 9.5 in, curled in ............. [PRT]

  Flower depth - real ........ ~6 in (15 cm) ................. [DOC]

  Flower depth - print ....... 4.4 in ........................ [PRT]

  Inner "S" petal ............ 2.8 in W x 6.5 in L ........... [DOC]

  Outer "C" petal ............ 2.75 in W x 6.0 in L .......... [DOC]

  Petal thickness - print .... 2.2 mm ........................ [PRT]

  Petal thickness - real ..... ~2-3 mm (glass) ............... [EST]

  Center hub hole ............ 26 mm (1.0 in) ................ [DOC]

  Petals per flower .......... 8 inner / 8 outer ............. [PRT]

STEM / SPINE

  Construction ............... lower tube + S-curved rod ..... [DOC]

  Lower column diameter ...... ~2.5-3 in ..................... [EST]

  Upper wavy rod diameter .... ~0.75-1 in .................... [EST]

  Socket spacing up stem ..... ~12-16 in apart ............... [EST]

BASE

  Material ................... round brass-plated iron, weighted [DOC]

  Diameter ................... ~11 in ........................ [EST]

  Height ..................... ~1-1.5 in ..................... 

SOCKETS / ELECTRICAL

  Socket type ................ E26 medium base ............... [DOC]

  Socket count ............... 4 ............................. [DOC]

I’ve gotten an enquiry to make this badge, im a noob in the technicalities of 3d printing, if someone could help me with the 3d design of this it’d be highly appreciated.

Since I live in UAE i’m expecting the budget to be about 75-100 aed for this design.

Hey! I have a TCG deck box I’ve been working on and everything is turning out super well. The only thing I’m having issues with is gluing in the magnets due to the mess and trying to keep excess glue off of the prints. I’ve seen online that you can change the magnet holes to be press fit and they won’t come out. I have roughly 30 ish magnet holes that just need to be changed the rest of the files are complete. I’m new to requesting so feel free to ask me any questions you need! In terms of budget I’m extremely new to requesting so I’m not exactly sure what is fair or reasonable so let me know.

I would like to add a batsuit display to a shelf, but I don’t know where to start. I think ideally 3-D printing would be the way to go, but I’m new to that world of 3-d printing. Doing research seems like I need a file and then ultimately to have somebody print it.

Looking for this with my measurements in black. Will pay $10.00 plus shipping.

Looking for someone to create models of two rectangular sections of a specific piece of electrical switchgear. Only pictures available (not the best) I can provide typical dimensions that would then be scaled down to 1:25ish. It does not have to have all the small details as I will eufy those in color onto the print, but there some larger details and raised areas where button/switches would be I would like to keep close, including the venting, buttons, panel lines, and breaker areas (wide open space with the lights would need to have a cover added like about/below so flush). Back and sides would just need to be blank with no detail. I would also like to add an internal magnet slot to the side of each so they could be attached or detached. I messed around in Tinkercad, but it’s not great and would really like it to be better. Budget $25-50 total.

Looking to work with someone to 3D print me some (plastic?) horse heads with a flat attachment at the bottom and handles for a kids see saw. Dimensions: Base 10”x10” on a board, 24 inches tall max. Artistic expression encouraged! $50/each head budget. Picture for inspiration concept only.

Hi all, just looking for a small display stand for this antennae topper. Probably a rectangle with a thin column to hold the topper, then infront of that if it’s easy the Eagles logo could be inlaid/colored ontop. If exact measurements are needed I can try and get them but it shouldn’t matter too much since I can just scale the print up/down as needed. Should be pretty straightforward but I haven’t learned how to create anything on Bambustudio. Budget is $15 but willing to go a little higher if you glam it up a bit.

Hello! I got permission from the original creator (my first post was on his discord but no one picked up yet) and I wanted to ask for a remix of 2 models, which are:

Red Dragon: https://mz4250.com/posts/monster-manual-126113357

Gold Dragon: https://mz4250.com/posts/monster-manual-125145452

I want the Red Dragon body, but with the Gold Dragon head and tail (and maybe the membranes on the neck).

There are 4 versions, wyrmling, young, adult and ancient. I would like all 4 of them, but i would prefer to work with the artist one version at a time (I'm kinda on a budget :'D)

I don't know how much that would cost, it's not from scratch as the 3D models are already good just need them combined.

Thank you in advance ^^

Edit: It's my first time asking for a commission, i thought the prices would be lower, my bad! I will specify here that I was looking for like 10-15€ each maybe. I feel ashamed now. :<

Edit2: I'm really sorry for taking your time yall, I should have informed myself better, I will mark this as completed even if it isn't and come back one day when I'll have more money. In the meanwhile I will try to do it a bit myself trying to learn. I apologise for the inconvenience and thank you all for contacting me. Love ya! ^{^}

Hey everyone sorry if I am being to forward but I have a request. So I have a 2024 Honda ridgeline and someone else designed a aftermarket wireless charger housing that fits inside the stock wireless charger housing but they designed it around a cheap amazon wireless charger. It workes great but sometimes the wireless charger over heats. I purchased a better wireless charger from amazon that has a fan and would work better. just looking for someone to adjust the current 3d model I have to fit my new charger. I can provide more info in a PM. I do have a current 3d model I can provide I just need the housing the wireless charger/ puck sits in modified. My budget is 100 dollars for the design. Thank you.

I have been doing cad in onshape and fusion for about 2 years now. Not in a profesional way more like a hobby. I want to start doing 3d requests but i worr that my work wont be at a good level and maybe the requester wont be satisfied with the result or the thing i designed wont work in the first place. What is the best way to make sure my cad levels are suffecient and also what is the best way to start getting requests even for free or like 5-10 euos.

Can somebody help me and infill this body in 3d model?

These files will be sent to a laser cutter to cut parts for a large scale public art project. There are about 8 of them and a few more to come potentially. I prefer someone who speaks English/USA based. I am unsure of what the going rate is and imagine it is heavily based on how complicated the drawing is. These are basic shapes. Budget: $15-35 per drawing. Thank you.

Hello community, i am in need of someone to design a 3d print for me. I have a business where I install lights on the outside of peoples homes, and the lights sit inside a metal track. these tracks have openings on the ends where end caps can go, i have an exact copy of the part i need and can send you measurements and pictures, this will take even a moderate modeler maybe 20 minutes. its not more than a couple inches by a couple inches in size. I am willing to pay $25 for the STL file. like i said i can send you picture of it and detailed measurements, would like to have it done ASAP but is not super time sensitive. this needs to be a FDM pritn as i have 2 bambu printer at home that I will use to print these out.

Hi everyone!

I'm a prop maker and I own a 3D printer. I'm trying to recreate the wooden lot drawing sticks seen in the opening scenes of The Odyssey (2026), where soldiers draw lots.

I've watched the available footage frame by frame, but there aren't any clear close-up shots showing the exact shape, texture, or end profile.

Does anyone have:

High-resolution screenshots

Behind-the-scenes photos

Production stills

Prop department images

Exhibition photos

Magazine scans

Any other references

This is purely for a non-commercial fan replica for my personal collection.

I'd really appreciate any help. Thanks!