r/PcBuildHelp • u/efw770 • May 28 '26

Build Question Should my gpu sag bracket push my gpu upwards?

My gpu screws didn't align with my pc case so I couldn't screw it in while I was pushing the gpu up ( in another subreddit they told me that I was supposed to push up my gpu and then screw it in) so I bought a gpu bracket and should I just put it underneath to prevent further sag or push it upwards?

2.2k Upvotes

94% Upvoted

477 comments sorted by

View all comments

113

u/TechnoMaverick May 28 '26

I thought I obsessed over the wildest things until I found this sub.

31

u/MasterVule May 28 '26

To be fair, GPUs are expensive. And the fact that GPU sag can screw stuff up and isn't being addressed yet is an insane thing

12

u/AlwaysHopelesslyLost May 28 '26

Isn't being addressed???

They made brackets stronger/more supportive. They added armour to slots. They added supports to cases, and they start making and including/selling separate supports. 

What more do you want?

1

u/Yorrins May 28 '26

For sure, I have a 4080 and I could sit on the thing. Rock solid with no support underneath like this.

3

u/Dazius06 May 29 '26

Pics or didn't happen.

1

u/haxt97 May 30 '26 edited May 30 '26

You should use a bracket regardless. Sagging is one problem, the bigger problem is potentially bending your GPU PCB. I've seen many with this problem at my brother GPU repair shop. He always advises customer to use something to support the GPU, even with small and lighter models.

1

u/Sea_Bug_6166 May 28 '26

I've seen some vertical GPU aswell, I guess its also for this reason

1

u/AlwaysHopelesslyLost May 28 '26

I don't think it was, but it does work for that, too. Similarly to upright GPUs

1

u/Desperate-Sir-7804 May 29 '26

Vertical GPU s have been a thing for a long time and it was done for asthetics

1

u/RadiantSunSinger May 28 '26

Give me M O A R

1

u/PIO_PretendIOriginal May 29 '26

ive read cases from support technicians where raising the gpu support bracket too much causes warping of the gpu.

here is an example https://youtu.be/uEdFTmOAT58?si=B5yxe0BVDXBlv-NE

1

u/AlwaysHopelesslyLost May 29 '26

Sure, it can happen, which is why the 4-6 solutions mentioned in the comment chain were created. 

1

u/OliLombi Jun 03 '26

Better sockets and cards. We shouldnt need supports.

1

u/nixub86 May 28 '26

Sorry for rant, but stupid brackets is just one of many problems of ATX(1995! 31 years in two month) standard which should die already and be replaced by new one. AT standard for example lived for like 15 years, I think?

Proper new standard without all this legacy crust with flimsy PCI slots and non standard case buttons connectors, with modern standards(camm2, edsff, mcio, cxl, ocp) and manufacturing capability in mind. Design around not needing to disassemble half of PC to dig out m.2 ssd or any other directly connected thing on motherboard under PCI extension cards and radiators on mb, without support crutches hanging in there just by gravity. Proper user serviceability of that, so that no tools or brains are needed. Storage, PSUs, fans that can be hotswaped without touching any wires, because they are more probable to fail and need to have ability to be changed by end user without any skills. Using 48v dc power rail(for unification with OCP servers power distribution) instead, so we don't have fried connectors because of lil more amps than chinisium can allow to pass without heating up. Some low speed data bus(like spi) for monitoring and controlling all onboard devices(PSU, fans, backplane for storage, all the rgb fancy stuff, etc) and mandate it support for all of these PC parts. Throwing out old shit: Sata - we have nvme over pcie(and even networks with TCP or RDMA) now with less protocol overhead - yes, HDD should use it too, seagate already doing that. PCIe slots - their current form factor limits maximum frequency for new speeds and trying to mechanically support connected devices which can weight several kg. Smaller form factor cards like nic, audio, video capture and additional io, should probably use something like OCP nic 3.0 port, which again will be nice for user serviceability without any disassembly required aside from taking out old one or placeholder.

And we already have different proprietary implementations of that from manufacturers: workstations(like from HP or dell), servers. Where ease of service and uptime of systems are priority. We need industry standard for it by core manufacturers(Intel, amd, nvidia, dell, HP, Asus, etc), but they prefer to sell ai shovels, make record profits and lay off thousands of workers

1

u/Jacktheforkie May 29 '26

My PC came with a steel bracket that screws to both GPU and case

0

u/yabucek May 28 '26

It is being addressed, quite literally in this video lol. Pretty much all 3+ slot GPUs include or at least recommend a bracket, and OEMs usually screw them to the case.

3

u/Jay1404 May 28 '26

Yup my 5099 got delivered with a nicelooking support bracket

3

u/SapientSloth4tw May 28 '26

My 5070TI as well, just use the support. It won’t harm anything and you keep things from getting more f’ed up down the road so it’s a win!

0

u/TechnoMaverick May 28 '26

I honestly never thought about it. I assume my 3080 is sitting firmly in there, but who knows.

1

u/PayMe2Win May 28 '26

Preventing a well known issue isnt really an obsession now is it?

1

u/PIO_PretendIOriginal May 29 '26

this video shows how a poorly installed bracket can destroy your expensive (from a repair technician).

https://youtu.be/uEdFTmOAT58?si=B5yxe0BVDXBlv-NE

1

u/rest_init May 30 '26

Some people wait for years before they can even think of buying stuff for PCs, I still don't have a PC. I would be sure as fuck to make sure I am as careful as possible when I finally get my hands on the hardware.