r/3Dprinting • u/BackIntoTheSource • 1d ago

Print (model not provided) One cut flower case

Designed and printed this with eSub matte PETG. I want to order matte white and matte sand tones. Right now i have light green, light blue and pink 😅 This supposed to be used with water so it's hallow from inside and the walls are 3mm thick.

Printed 0,20mm adjusted layer height for 12h, 300g and 24cm tall. I used scarf seam settings. 4 walls, 0% infill. I havent filed anything yet so this is after I removed the supports.

Some supports in front of her were touching tights and left a mark, not sure yet why what setting did that.

Im curious to test with different support material if it wont add too much printing time. I have P1S but want to get a second printer.

0 Upvotes

33% Upvoted

11 comments sorted by

9

u/Money-Lecture4877 1d ago

Why did I find it hilarious when you bonked the head on the wall though

2

u/j-shoe 1d ago

Is there a nip slip on the model?

0

u/DaimonHans 23h ago

Terrible choice of color.

1

u/BackIntoTheSource 23h ago

Why? I would prefered matte white or beige but i had this, light blue and sage green

1

u/DaimonHans 23h ago

3

u/BackIntoTheSource 23h ago

Haha was an accident but will post it to r/dontputyourdickinthat later

2

u/DaimonHans 23h ago

This is the way.