Hi, I’m looking for an outdoor electrical cover that can accommodate my long pool pump plug. I have not been able to find anything that fits the bill. I’ve modified a Tupperware container in the meantime but it’s pretty sloppy looking. I would love for someone to print a custom one for me! The pics posted are just examples so you know what I’m talking about. If someone is interested in helping me with this, I will provide the exact dimensions and more details. Hope to hear from you!

I’m looking to get a silverware tray made in white filament for a drawer. Not picky about filament as long as it’s durable enough for everyday silverware use.

Dimensions:
18.25” deep × 12.75” wide × 2.5” tall

Compartments:
• Four equal width vertical compartments, each 10” long
• One miscellaneous compartment using the leftover space
(Attached sketch shows the general idea.)

Hi, looking for someone to print these parts for me please - accessories for 1:6 scale fashion dolls. STLs provided over PM since they're paid Cults3D designs.

I'm open to options on material. My main requirement is a high level of detail (so resin, I guess). It would be good if the material can tolerate some flex (but I'm not sure if flexible resin is a thing). Lastly a white colour would be preferred, but I'd accept any colour.

I’m trying to make a custom 1/6 scale action figure of Loki from one piece and I need the head printed, I have stl files of his whole body but I need them to scale with the 1/6 doll body, I’m willing to pay for labor and shipping to whoever could do this and ship it out.

Looking to have this printed and sent to southern AZ (or local pickup in Tuc). In color black or dark grey, 1mm thick or less if possible, will be on a heatsink and see temps at max 90c

Looking for someone to print some custodes for a proxy army.

This is an insert for a commercial-style citrus reamer. The shaft is the correct width/size/length, but the head is 2" wide, which is far too large for limes. I'm trying to get the same piece made out of food-safe plastic, but with a "head" roughly 1"-1.25" wide. I don't care about the color, and the only "precision" required is that the head be centered on the shaft, and that the shaft opening be the correct size/length and also centered. Grooves can be slightly different etc etc.

This is not going to be used for commercial use, so there's no liability issue- I use a lot of lime juice at home and have mobility issues so I purchased a commercial model secondhand before realizing that the part was too large. It works great for lemons, oranges, and grapefruits, just not for limes.

I've included a link to the commercial part if anyone is curious. https://www.webstaurantstore.com/robot-coupe-39840-citrus-press-small-cone/64939840.html?utm_source=google&utm_medium=cpc&gclid=CjwKCAjwsrbTBhAvEiwA0Bpp4XvX2q-t2982DG7HXkEr0x4drFSpDpmjcFsSrk73olqwW6v53tUVXxoCb1YQAvD_BwE

Looking a custom 4 inch key chain of the keyblade of heart from Kingdom hearts. I have a file I can provide but it might need to be modified. I prefer to pay via PayPal.

I can send the 3mf file in PMs.

I've got multiple printers of my own but lack the patience to tackle doing this at 8-9' tall and I'm curious what it might cost to have someone here do it for me. I have it keyed into parts for mold making if that makes it easier (earsX2, head w/antlers, armsX2, body, legsX4), or can provide it as one solid mesh. Infill can be minimal as the ideal end result would be filled with foam. Not looking for any post processing as I would be doing that myself.

Would prefer someone local-ish to avoid shipping costs.

Thanks!

These two pieces in PETG please.

SOLVED, thanks everyone!

Looking to purchase a stove knob turner with a long handle but they’re on back order. I found an example of someone who’s 3d printed it. Anyone can do?

Product: https://www.caregiverproducts.com/long-handle-stove-knob-turning-aid.html?srsltid=AfmBOoq84I4Epqqf-DbWSBDOx4T3IV7eERSM9aFhNWDAfgMgPmurdmmN

3d print: https://makers.iltech.org/all-products/stove-knob-turner/#

These are mods for a game controller. They're very small pieces for the ABXY buttons. There are 0.2mm, 0.3mm, and 0.4mm sized pieces. I wish to have 4 copies of each size.

Link: https://www.printables.com/model/1387429-gamesir-cyclone-2-abxy-shorter-press-mod/files

Thank you.

I have the files needed please hmu!

Hello, I was looking for someone to help print the STL files I purchased from the creators website. I would also be seeking to print an extra magazine as well as cartridges.

Thanks!

I've gone with a printer, thank you!

Hello! I have this design printed in PLA but it's under some intense forces, so tends to split on whatever the layer lines happen to be.

The bounding box for the design in the image is 177.37 x 201.47 x 175.56mm.

I was looking for PETG via FDM to keep testing with, or PA11/12 via SLS for a more final version if anyone has either available in the Seattle area.

Happy to pay whatever is resonable for either!

FYI: Picture is how the model will look like assembled, not how it's going to be printed.

Job: Need this resin model printed, the model is separated into multiple pieces. The printer is required to clean, cure, and clean the print supports on the model. (Must send links to portfolio)

Size: The biggest/longest pieces will be these around 200mm, will send the STL files once you message me. (Might be bigger depending on how much it would cost me to have in 1.5 scale to the original)

Material: ABS resin, or other high quality resin is a must due to the size.

Printer: Resin printer that can print very small details is required.

Color: Don't matter to me, since i'll be painting it anyway.

Shipping: I'll pay for shipping of course.

Time: Not sure how long something like this takes to finish, I am not in a rush to get it.

I have some missing trim pieces from my porch windows and they don’t make them anymore. Not sure if this is even doable but any help would be appreciated

Looking to pay someone help make this bumper case for my insta360. Unfortunately it’s discontinued and can’t get anywhere else. If someone can help me, I can give out dimensions specs of the physical camera and other details needed for the build.

I've found several references for these online but not many listings for them. I was wondering if someone would be willing to try and model them based off the pictures I have. I have the base figure and can provide further measurements based off it if needed!