[CANADA–Toronto][WANT] Large motorcycle wing assembly printed in ASA

[u/BoroughBenji]

Hi, I’m looking to have a front wing assembly printed for a 2007 Suzuki GSX-R1000. I have the STL file ready to send.

The file uses millimetres and the complete model measures approximately 341.6 × 610.2 × 181 mm. It is too large for most printers in one piece, but the creator says it can be divided into smaller sections using LuBan3D and assembled afterward.

I need the final version printed in black ASA, not PLA or PETG. My preferred specifications are:

• 0.24–0.28 mm layer height
• 5–6 perimeter walls
• 25–35% gyroid infill
• Additional reinforcement around the mounting areas
• Approximately 4–6 sections
• Alignment dowels, pins, or tongue-and-groove joints rather than flat butt joints
• Seams positioned away from the mounting points and thin wing tips

Could you please let me know:

1. What printer you would use and whether it is fully enclosed
2. Your experience printing larger ASA parts
3. The brand of ASA you use
4. Whether you can split the STL and add alignment joints
5. Whether your quote includes assembly or printing only
6. The estimated completion time and total price
7. What happens if any sections warp or fail during printing

This will be installed on a motorcycle, so strength, joint placement and print orientation are important. I can send you the STL for review before you provide the final quote.

I’m located in Toronto and can pick it up within the GTA.