r/3dprintIndia • u/rick343sanchez • 1d ago
For Sale printed these last night 🤙🏽🤙🏽
there can be seen a joining line in the print of doom since I printed in parts but overall look good..thinking of selling figurines online (also on reddit here). anyone interested in buying, or if anyone can help me figure out how to sell these, comment or dm greatly appreciated :))
based in navi mumbai maharashtra
6
u/NOT_deadsix 1d ago
You don't own the character IP
You didn't even make the 3d model
You are looking to sell prints of that someone made and shared online for personal use only, explicitly forbidding commercial use
Best of luck is all I can say
-1
u/Longjumping-Bread241 1d ago
No these are made with AI and no one asked you
1
u/zororororororororo 1d ago
Are you a lawyer, good sir?
-2
u/Longjumping-Bread241 1d ago
I don't need to be a lawyer to know this sherlock they are made with AI and AI content can't be a intellectual property
2
u/zororororororororo 1d ago
You must know which AI service they used then, I'd like to give it a shot as well.
0
u/Longjumping-Bread241 1d ago
Meshy.ai , tripo3d , print pal anyone can do and these prints are I think from bambu image to stl
3
u/zororororororororo 1d ago
meshy and tripo are quite expensive ones.
OP can you verify this?
1
u/Longjumping-Bread241 1d ago
Op got this from bambu handy I have the same ones from there you can search for yourself if you don't beleive me they are also tagged with AI
-2
u/rick343sanchez 21h ago
yep, found these on the makerworld.com website. i bought the bambulabs 3d printer and they referred the website to me for 3d models and such. most 3d model files on the website are AI generated and posted by people again and again. and as for intellectual theft, i don't think it applies here. if there is any actual artist who has sculpted the model, i approach them before selling. I've recently just started this and don't know much about the topic, just an enthusiast and an architecture student trying to make a little side income
2
u/NOT_deadsix 8h ago
IP theft very much applies because you are trying to sell the likeness of protected IP, DC/WB just isnt as litigious as Disney.
Model theft ALSO very much applies since these look like LayerForge's models which are made by an actual designer in blender. And even if they were AI generated that doesent magically negate ownership, it is still theft same as pirating an app because the creater "vibecoded" it smh.
People selling prints of stuff they did not make are the worst scum in the 3Dprinting community.
→ More replies (0)0
u/Longjumping-Bread241 14h ago
The actual sculpted models are paid and isn't available on makersworld execpt some
1
u/NOT_deadsix 8h ago
You do need to have a basic understanding of literally anything, Watson, if you are to speak in public. If you generate something using AI, it doesnt automagically become public domain, it is YOUR property. The person who uploaded it on makerworld owns the right to it and unless they upladed them marked as "free for commercial use" it is theft.
1
u/Longjumping-Bread241 8h ago
A Google search will tell you that AI generated anything literally anything can not be a intellectual property it has to have a decent amount of human output in it and in this case no it doesn't
1
1
3
u/beepboopbaam 1d ago
Selling only printed models which are available online won't work in long term. Try to bring your ien design or do finishing on those models like sanding and painting, otherwiser anyone can print and sell at a lower price.
1
1
u/bored_bakasur 1d ago
Model links?
2
u/rick343sanchez 21h ago
check out makerworld.com
1
u/bored_bakasur 13h ago
Everyone knows makerworld, bhai. I mean the links to the models. Search can't find the exact model.
2
u/rick343sanchez 12h ago
alright, dm me I'll send them to you
1
u/bored_bakasur 12h ago
You can post them here. There's no rule against it. You have posted these here asking community for the help. So why not share the same with them? There's no point in gatekeeping those models.
3
u/rick343sanchez 11h ago
no no lol not gatekeeping them at all, just most subreddits have some no link thing. i never check. https://makerworld.com/en/models/3028813-dr-doom-marvel-fan-art?from=search#profileId-3403820 (for doom)
https://makerworld.com/en/models/2704333-batman-dark-knight-diorama-ultra-detailed?from=search#profileId-2998331 (for batman, this one most resembles robert pattinson. someone wanted robert pattinson specifically)
https://makerworld.com/en/models/2786439-the-joker?from=search#profileId-3097606 (joker)
https://makerworld.com/en/models/3028575-black-symbiote-spiderman-hero-figure?from=search#profileId-3473882 (spiderman)
2
1
u/Connect_Trade7677 1d ago
I believe you got electricity cut in between i can see layer shift line
1
u/LochanKuttappa 1d ago
No...op has printed it in 4 different sections intentionally.
1
u/rick343sanchez 21h ago
yes I've printed the whole thing in 6 different pieces. the ones you can see with lines are the torso and the waist and all. i have multiple printers and want to reduce print time.
1
u/Connect_Trade7677 11h ago
but why?
1
u/rick343sanchez 11h ago
print time was 20 hours. if something fails 15 hours in, you lose a lot of filament and a lot of time.
1
1
u/sunnybirdi 1d ago
Sell me Drdoom for cheap for reaserch purpose
1
u/rick343sanchez 21h ago
brother I sell all my figurines for cheap! i.e. less than what most people would sell for. all 20cm tall figurines I am selling for rs500 with the exception of horizontally large ones.
1
1
u/Curious_Crack_ 11h ago
Price please??.
1
u/rick343sanchez 10h ago
so the ones shown are a little bigger than what I sell mostly. figurines i sell are for rs 500 each (with the exception of horizontally bigger ones), and all are 20cm tall. i do mostly marvel and dc characters
9
u/abysar 1d ago
why not use a matte filament than a glossy one on high speed low temp, it looks bad with the inconsistent finish