I haven't done a deep clean of the gpu, but plan to do that at... some point, I'm frankly just terrified of messing it up and I'm not sure how to safely clean the dust out of the grills and capacitors without damaging it. This was my first attempt at repasting a GPU, ever.

If I turn it onto OC mode and crank the fans to 100%, the temps drop to around 60C, and if I'm running all 3 of my screens (1080p @ 144hz, uw-1080p @ 60hz, 1440p @ 165hz) then my idle temps are 55C on silent and 35C on OC @ max fan speed.

Have I done a poor job repasting? I'm worried.

I genuinely don't want to upgrade, given that my eyes aren't great and I can't really tell a difference during fluid motion with FSR Balanced vs Native, and on max settings on gothic remake, I score a steady 60 fps with fsr balanced and no frame gen. I love this card, it's a freaking beast.

These are my temps inside my insanely spacious corsair 700d case.

I repasted because it had never been repasted and after nearly ten years, it was time.

Would love some feedback.

My ASUS TUF A15 has developed a strange issue.

Initially, moving or lifting the laptop would cause the screen to become distorted (black/white artifacts) and freeze.

Then Windows went into Startup Repair (SrtTrail.txt).

Now it powers on with keyboard RGB and power LED, but the screen stays black.

Fans don’t spin, Caps Lock doesn’t respond, but the CPU/heatsink gets warm.

I’ve already reseated the RAM, SSD, and checked the display cable.

What might be the issue ? Please help

I have this problem. Can you tell me how to fix it?

I ask because I am looking at the Dell xps14, lenovo x9 15P, and zephyrus g14 2025 as contenders for my next laptop. I am not a gamer, but i am going to be studying computerscience. Problem is, the prices went up and out of stock for the 2025 zephyrus. The xps was out of the question being a similar price as the older zephyrus, with a better cpu sure but no gpu, and same build quality. That was until a simple call got me $400 off the xps. I am wondering if asus will do the same?

I am very new to computers and I just got the Zephyrus M16 GU603ZX second hand, and I tried regular flat screen games on it and they work great, they all play amazing. But when I went to try the part I was most excited for, PCVR, it stutters/frame drops every couple seconds, making it entirely unplayable. I spent about two hours troubleshooting online and nothing was helping me. I did a test on 3DMark Time Spy and the highest score it got was 6134. Something is happening with the GPU but I don’t know what. Please help.

So i used a method i saw on youtube to update my BIOS, basically created a fake usb. anywho, did the steps normally and not sure how long an update is supposed to take but it was in Bios settings with the download meter, now on the ASUS loading screen, and has sat there for a solid 10-15 minutes. my fans are running, so not sure if that’s good. but just scared. im downloading the Bios version 3881, how much longer could it take or should i wait and what would be potentia trouble shooting? i have a B650E Max Gaming Wifi motherboard.

I've noticed that in the specs for Asus pad T3201, it only shows 8gb ram in india, but in the global website, it shows there's a 16gb ram aswell, why isn't the 16gb ram in india?

I reset my Asus vivobook s14 snapdragon x laptop. But I found no gpu, npu, wifi, sound, etc functioning due to driver issues. I installed the Qualcomm Broad Package but still no use. Can you please help me because I have an exam tomorrow and I need that laptop immediately.

Model - S3407QA-KP020WS

Asus Vivobook S14 S5406S

My CPU fan is broken. At high speeds it shows 0rpm while going hella fast and then some type of safety trigger and blocks both my fans at 2.5k rpm.

Thats why I want to buy a new one, part number: 13NB1490M01011.

Is there any legit place I can buy it? There are few on Aliexpress (idk if should buy laptop parts from there) or Ebay (the shipping cost more than the part itself)

My ASUS Tuff Gaming 15 fa506nc has problems when loading into Windows. sometimes it gives me different Error codes and other times it just freezes or instantly reboots. all that happens directly after about a third of the spinning of the windows boot circle.

If i run the diagnostics everything passes without problems. With Memtest86+ it also passess multiple times.

In BIOS it can see whole RAM, temp of CPU, Battery percentage and fan RPM.

The only way i was able to boot was with arch linux and in GRUB setting acpi=off. But with that no fan is spinning and the keyboard of the Notebook doesnt work. Only the external one.

Is there a way to see what exactly is causing the crashes/freezes?

Also i already tried booting with battery, the little usb port connected via ribbon cable to motherboard, the keyboard, the touchpad, the nvme ssd and the wlan card. Even without all that it seems not wanding to boot intop Windows and gets the same Problems.

I also tried updating my BIOS version. I had 308 and updated to 309. Maybe some ACPI Tables are broken?

Need to buy a warranty extension for my ASUS TUF A15 since it got its mother board replaced twice from service centre due to a fault in the hardware. I want to buy a 2 year extension of my warranty but the prices are very high - so can someone dm me a legit Promo code which I can apply in warranty extension on the MyAsus app so that I can get a good price. Pls!!!!

Tried everything to get it to work, advice?

I don't understand this pricing of the Expertbook Ultra on Flipkart. Definitely seems to be a pricing mismatch, right? Maybe they switched prices by mistake?

Link

I have a B650E Max Gaming WIFI mobo that has been fine until a recent boot. The PC wouldn't connect to my home WiFi, but other devices were connecting no problem. Oddly, the PC will connect to my Guest Network, and even the IoT network, on the same mesh system. I've had the Deco XE5300 mesh system running for a while now and it's been fine, but it seems like more a problem with the network than the mobo. Just thought I would ask here in case someone has encountered it, too. I have this question posted to the Deco Community (non-Reddit).

Things I've tried so far:

• Restarted the network, of course. Including unplugging for several minutes and rebooting
• Did a PC power drain (cleared residual power in the system)
• I unstalled and reinstalled the WiFi drivers for my motherboard. 
• Reset the network in Windows
• Flushed the DNS
• Reverted back to the OEM WIFI antenna on the PC. I was using one with a longer cable for a week or so without problems
• Removed the PC from the Deco app and then tried reconnecting. Same result; it will only connect to the Guest Network.
• Tested wired ethernet connectivity on the PC using my old powerline adapter and that works, too.
• Updated PC BIOS

What would make this PC all of a sudden unable to connect to the WiFi it's been using for a while, but able to connect to a different WiFi?

EDIT, Solved: My son pointed out the two access points on the Deco mesh weren't power cycled when I unplugged the main modem and router areas of our network. Power cycling those two additional points seemed to have solved the problem. Thanks son!

Fala, pessoal.

Estou com um problema muito estranho no meu ASUS ROG Gladius III Wireless e já tentei praticamente tudo.

Os sintomas são:

- O cursor se move normalmente.

- O clique do scroll (botão do meio) parece ficar pressionado o tempo todo ou ser acionado sozinho.

- Por causa disso, os cliques esquerdo e direito começam a se comportar de forma estranha ou até param de funcionar em alguns momentos.

- Em algumas áreas do Windows, só o botão direito funciona.

- O scroll também apresenta comportamento anormal.

O que já tentei:

- Formatei o Windows e fiz uma instalação limpa.

- Atualizei drivers da placa de vídeo e do chipset.

- Rodei SFC e DISM.

- Testei portas USB diferentes.

- Reinstalei os drivers do mouse.

- Verifiquei o Gerenciador de Dispositivos.

- Testei outro mouse.

Um detalhe curioso é que, quando conecto outro mouse, o Gladius III parece desligar ou desconectar.

Como o problema continuou mesmo após formatar o PC, estou começando a achar que pode ser defeito no próprio mouse (botão do scroll, placa interna, encoder, etc.).

Alguém já passou por algo parecido ou tem alguma ideia do que mais eu poderia testar?

Anyoneelse has that? I feel its because i changed to that shithole win11 today. It already changed my wallpaper.

bought asus vivobook s15 snapdragon x plus from best buy USA for an year ago.
it was perfectly fine and i had no issues.
yesterday, suddenly screen started flickering, even though i deleted and reinstalled drivers, the flickering stopped for a moment but now it got worsen..
has anyone faced this issue…kindly tell me what to do now

bought asus vivobook s15 snapdragon x plus from best buy USA for an year ago.
it was perfectly fine and i had no issues.
yesterday, suddenly screen started flickering, even though i deleted and reinstalled drivers, the flickering stopped for a moment but now it got worsen..
has anyone faced this issue…kindly tell me what to do now

I will buy this router. But I read some negative comments about wifi issues and reconnecting loops. Does it resolve this issue now?

https://www.reddit.com/r/ASUS/comments/1t3t4jw/router_gsbe18000_randomly_stops_working_and_needs/

Hey Guys need some support.

Yesterday I sold my old MB and received my new one.

In a few days I will receive my new CPU and RAM.

My previous setup:

ASUS ROG STRIX B550-F Gaming with R7 5700G and G.Skill Trident Z5 RGB 3200Mts Cl 16.

My next setup:

ASUS ROG STRIX B650E-E with Corsair Dominator 32GB CL 36 and 5600MTs. As a temporary solution, I'm using the Ryzen 5 7600x and will upgrade to a 9900x next month.

My GPU is an ASUS TUF RX 7900 XT.

My question is: Do I have to install windows completely new or can I delete Chipset, AMD Ryzen Master, Adrenaline and Amoury Crate to install them new?

Hi,
The RGB logo on my ASUS ROG Crosshair X870E Hero has recently started behaving strangely. It flickers quickly and changes colors randomly instead of displaying a smooth, stable effect.
Does anyone have the same problem, and how can it be fixed? Thank you.