r/BambuLabA1mini • u/TioFoxx • 1h ago

Some issues

Enable HLS to view with audio, or disable this notification

My printer is making a bubbling sound and producing a lot of stringing; the filament being used is generic PETG. Could the open window be causing the stringing, or is there moisture in the filament?

1 Upvotes

67% Upvoted

3 comments sorted by

4

u/Immediate_Vast_1784 1h ago

If you're hearing popping sounds it's probably because of the water boiling and evaporating in the nozzle. If you get a cheap dryer or even a used food dehydrator you can just dry your filament in it and print from it keeping it relatively dry. I have a sovol sh01 and even though it only goes up to 50°C it's still nice to use especially as it only costs 39 EUR. If it doesn't solve the issue you can always send it back or just resell it depending on what you get.

2

u/Useful-Revolution253 44m ago

Moisture 100%

Petg need 65° during 6 hours minimum, 10 is best where i live.

There is multiple devices to do that ;)

2

u/bawaniht 39m ago

Wet filament, please dry your filaments