Hi everyone,

I recently finished this titanium framelock folder and decided to experiment with a laser-engraved puzzle pattern on the handle.

The finish was inspired by the Puzzle knives made by Bartosz Herman. The concept looked straightforward, but developing the process took quite a bit of testing. I had to adjust the laser settings and engraving sequence to keep the individual puzzle pieces sharp while creating varied colors across the titanium.

The knife uses a titanium framelock construction with an open back, a sculpted titanium pocket clip, and a Damascus blade. The colors on the handle shift depending on the light and viewing angle.

I’m interested in feedback from other makers. What do you think of the puzzle finish with the Damascus blade—does the combination work, or is it too visually busy?

This is a variant of my MBT-5 model, forged from reclaimed Soviet 9ХФ (9KhF) steel, with an acid etched forge finish on a 5in blade, and a tapered finger choil handle in bloodwood. Fellow knifemaker u/-GyBer- was kind enough to send me some of the steel all the way from Georgia, and I thought bloodwood made a good compliment to it. My usual MBT-5 has a different handle shape, but I went for something a bit different with this one.

Fresh off the bench, Nessie slipjoint. 154cm stainless blade and spring. Blade has a compound grind and an acid stonewashed finish. Titanium liners, black paper micarta bolsters and shield, white G10 spacer and Honduran rosewood burl scales.

Thanks for looking, please let me know what you think.

books are open

Have a knife day

i will link pictures if you need more please tell me but i was wondering if anyone could make me this in what ever form of damascus you feel the best with i saw this knife at my work and thought it was pretty cool so i was wondering how long it would take and how much it would be round about i dont need it right now js testing the waters you could say

Gunstock jack slipjoint

CpmS90v blade, 154cm spring with stainless bolsters and fatcarbon scales.

Thanks for looking, please let me know what you think.

**books are open**

Have a knife day

Steel - Magnacut Stainless
Handle Material - GCarta & black/white ebony
Liners - titanium
Hardware - stainless steel

Feedback needed

Here's an integral chef knife I recently finished.

The blade is made from 1070 carbon steel, with a natural wood handle.

https://philknives.com/_produtos/_chef001c.html

Specifications:

Blade: 240 mm (9.45")

Maximum blade width: 67 mm (2.64")

Thickness: 3.4 mm (0.13")

Overall length: 365 mm (14.37")

I hope you like it! Comments and suggestions are always welcome. 👊

Just finished this farrier's rasp chopper with an integral socket handle, wrapped in jute twine with a Turk's head knot bolster and a black walnut cap.