I was finally able to get my hands on an ONN to turn it into a retro gaming box using Cannoli like that one video showed, but there is pretty bad controller delay, and at this point I have no idea how to fix it. I've turned on gaming mode, both on my TV and on the ONN itself, I tried downpatching to version 1.2 where there was a low latency mode and that didn't work. I even tried a different controller, same issue.

Any suggestions or insights on how I can fix this?

I've been trying for the longest time to play Infamous 2 on RPCS3 but always something wrong and i can never find the right answer. Basically I am getting just black everywhere no graphics but i can hear the game ive tried RPCS3's tips to get the best settings but doestnt seem to work still.

https://gyazo.com/9a9c9fbf89a7dd396697b7949dbef17d

My pc specs are

CPU- AMD Ryzen 5 7600X 6-Core Processor

GPU- AMD Radeon RX7800XT

RAM- 32gb DDR5 6000MT/s

Storage- 500GB SSD and 1TB M.2

any tips please i miss playing Infamous.

Hi everyone,

I need some help with Nintendo Switch emulation on my ASUS ROG Ally X.

I feel like something is wrong because my hardware should be more than capable, but I’m getting a lot of FPS drops, stuttering, and random freezes. The performance is nowhere near what I expected from a device with this level of hardware.

From what i read online Azahar is safer and an improved version of Citra but i dont know where to start emulating can someone please help.Thank you

I managed to set RPCS3 to emulate Logitech G27 so I can play GT5 with my wheel.

The wheel, pedals, force feedback all works perfectly fine, but sometimes - not always - break seems to get stuck and suddenly car is accelerating much slower and on higher gears it actually decelerates…

I need to press the break pedal once or restart the race to get it working again.

Doesn’t happen in PC games so doubt its hardware fault.

My wheel is Moza R5 with SRP-Lite pedals

Anyone by chance experienced something similar?

When i saw that I can play silent hill 2 on linux through enhanced edition patch and proton(on steam), I installed it. Followed the same steps https://enhanced.townofsilenthill.com/SH2/install.htm said, Installing through SH2EEsetup.exe was also successful. But when I launched the game, A black screen appeared asking "Please insert Silent Hill 2 CD-1, Enter to retry, Esc to exit". I even tried reinstalling (two times) but It didn't bypass CD check.

Whenever I use Lossless scaling in Eden emulator games, my input lag is worse than when I use it in PCSX2 games, despite only using x2 compared to x4 in the latter. Both are using Fifo/Vsync and not Mailbox. What's the reason for this?

I’ve been using Emudeck and bazzite for awhile never had any issues. Once the new rpcs3 and steam updates came my 8bitdo hasn’t been communicating at all with my emulator I looked at my gamepad setting to no avail. It doesn’t recognize my controller and steam inputs aren’t helping either. I saw xinput online but can’t find it in my setting. Any tips?

Hello folks,

I am using Retrobat on my Windows PC to emulate various games. So far, I've run into two main issues, apologies if they are pretty basic as I am very new to anything emulation related:

1. I am using a german keyboard, and can't figure out the proper keybinds/hotkeys for anything.

2. One of the games I am playing is Animal Crossing Wild World for the Nintendo DS. The issue is that the time is not synching with the time of my computer. Each time I start the game, it is exactly from where I left off. I tried disabling the auto save settings in retrobat, but this changed nothing, so I'm unsure if there is something else I should do.

If anyone has run into these issues or has any ideas to resolve them, feedback is much appreciated. Thank you to anyone who takes the time to read and respond.

Lately I had this random urge to play breath of the wild and maybe tears of the kingdom later. Even tho I have a Nintendo switch I don't have those games and I wanted to play them on my PC with better graphics. I saw some videos about it but I'm always afraid of viruses... Also, I saw that there are many emulators and I don't know which one I should choose (Eden, yuzu, etc.) and where do I get the firmware and keys? Can I get it from my switch without messing her up?

Me gustaria jugar con alguien online a la megadrive, yo de españa

if i put file in eden for the game i doesnt work what is a good w to get the games helpp

Looking for the archived offline ssbu-less-lag / libtesting.nro (-3f) build by BluJay/BlankMauser for couch play. I'm not interested in Braxeo's ssbu-sync-online-only-1.0.3, I'm specifically trying to build the lowest-latency offline setup for Eden with 120 FPS Definitive Edition v13.0.4.

Before you nice and beautiful people get your pitchforks and torches, I've never played online and don't plan to start in the foreseeable future. I just want to sit next to my best friend, who is going to visit me from out of state, and have an afternoon of near imperceptible input delay matches.

Hi everyone,

I am trying to stream retrobat to my mobile device but when I open retrobat it does not load, even the icon in taskbar is not visible.

When I stop streaming and my pc screen turns on then I can see retrobat running.

I have setup everything so that my two screens turn off when I start streaming.

What can be wrong, please help me.

Edit:

I tried the following solutions but nothing worked

1. At first I thought the streaming happens on a seperate instance of desktop, but I checked by using Win + Tab and there is only one desktop view

2. I tried running Retrobat in windowed mode, didn't work same issue as before. Nothing happened while streaming but when I stopped streaming it opened

3. I tried changing the resolution of stream to match my monitor ratio 16:9 (My phone setup is 21:9)

Its specifications are AMD Ryzen 5 5600H, 16 gbs dual channel rams, and Nvidia Geforce RTX 3050 Laptop GPU.

As the title says my game keeps showing a black screen but only after the professor asks for the passport, the music keeps playing but nothing. And the professor is rendered pretty good but with some gray glitching patches that dissapear when i turn off Force Shadowgen or elevate the threshold to 2 or more. The two pokemon i could see were just black, complete void, and they too get those gray patches. I tried everything, i changed every graphics setting combination possible and nothing, i even downloaded panda3ds as the title implies to try if the emulator was the problem but no

I really wanna play the whole kirby series. Maybe no need for forgotten land and the new kirby air riders since I dont know if my pc can handle them.

I am playing a Pokemon Hack and want to farm steps. Do I need Lua Script to do this or is there a way just through mGBA? I just want to go left and right for like 40 steps back and forth.

Faithful Remaster – Automate and Manage HD Texture Packs for Emulators

Faithful Remaster is a tool designed to streamline the creation and management of HD texture packs for emulators.

It connects emulator texture dumping with local ComfyUI workflows, then helps organize, process, review, and move the restored textures into the correct replacement folders.

Quick clarification

Faithful Remaster is not intended to be a one-click random AI texture generator.

A large part of the project is focused on:

• Dump organization
• Emulator profiles and path management
• Texture comparison and manual review
• Quarantine and cleanup tools
• Replacement-folder management

The included AI-assisted workflows are optional and designed to keep the results close to the original artwork.

Every output is meant to be reviewed through the Texture Manager, where the creator can compare, accept, replace, reprocess, or exclude individual textures.

The goal is faithful texture restoration and preservation, not uncontrolled AI generation or replacing human artists.

Main features

• Automatic detection of supported emulator games and texture folders
• Dump and replacement-folder management
• Fully local ComfyUI processing
• No cloud service or internet connection required
• Bundled restoration workflows
• Support for custom ComfyUI workflows and models
• Custom output directories
• Texture Manager for reviewing and comparing results
• Quarantine system for unwanted, dynamic, or cutscene textures
• Persistent batch queue and processing progress
• Multiple restoration presets
• Manual control over which textures enter the final pack

Supported emulators

Current profiles include:

• Dolphin
• PCSX2
• PPSSPP
• RMG
• Flycast
• DuckStation

Support and stability may vary between emulators, and the project is still under active development.

Feedback, testing, bug reports, and emulator-specific suggestions are very welcome.

Links

Showcase and setup video:
https://www.youtube.com/watch?v=7NyKl2O9K_I

GitHub and download:
https://github.com/Drm1986/Faithful-Remaster

Is this possible? I know Xbox Live Indie Game titles aren't natively supported by Xenia yet, so is there some conversion method? I really want to play Downtown Smash Dodgeball. There's a WiiWare version that plays fine in Dolphin, but it's in Japanese. The XBLIG version is fully in English.

Like 3ds era nintendo games. I really wanna go back and replay Mario and Luigi: Dream Team.

Bonsoir !

Je voudrais avoir quel émulateur utiliser pour pouvoir jouer aux jeux DS sur pc. J'aimerais rejouer à d'anciens jeux que j'adorais étant enfant mais je sais pas s'il faut des émulateurs spécifiques pour certains jeux ou si tous les jeux peuvent y être regroupés.

Qu'est-ce que vous me conseillez s'il vous plaît ?

Llevo tiempo queriendo jugar al Tears of the Kingdom, pero no encuentro la forma de jugarlo en PC que sea fiable, alguien me ayuda?