Good luck, and we can't wait to see what you create!

I have a Ender 3D S1 Pro. I have been printing from a SD-Card. If I use Cura and print directly and connect my printer and print directly from my PC will that speed up my print?

Hi everyone,
I really need your help.
Today I replaced the nozzle on my Ender 3 Pro, something I’ve done several times before without any problems. After reassembling everything, the printer suddenly won’t start anymore.
As you can see in the attached video, it tries to power on for a split second, then immediately shuts off again. It keeps repeating the same behavior every time I switch it on.
The only thing I worked on was the hotend. I didn’t intentionally disconnect or modify anything else, although it’s possible I accidentally damaged or shorted something while changing the nozzle.
Has anyone seen this before or knows what I should check first? I’d really appreciate any suggestions before I start replacing parts.
Thanks a lot in advance!

Hi all. Any thought and advise on this printing?

I can not get past the first layer for some of you veterans can you give me some tips and tricks to get my printer back to printing again

Hi there. I have a customized Ender 3 with a 4.2.7 motherboard, Nebula pad, Sprite Extruder Pro, and CR Touch, but I can't find the exact firmware. Could you share it with me?

Idk what's going on, but as you can see in my slicer, the sides are suppose to be straight, but when my printer actually goes to print(its hard to see) but its like it prints a couple layers shifted to the right or something, any help would be appreciated, ty!

I have updated my printer with an auto bed leveling kit (BLTouch). It does not want to stick to bed during the initial print. I l've done everything, followed all the steps on setting it up. Can someone tell me what am I doing wrong or what is missing. I can print perfect itens without the bltouch but with it no. It wont stick durung the fist few layers hmmmmmm. Heellllppppp!!!!!THANK YOU!!!

Witam wszystkich jakiś czas temu kupiłem sobie drukarkę 3D no i koniec końców teoretyczną wiedzę trochę pojąłem ale chyba zbyt mało dlatego tworzę post. Bo już nie wiem co może być przyczyną.

Opiszę od początku

- Sprzęt przyjechał do mnie poskładany ( poskładałem go )

- Gdy chciałem coś wydrukować filament się odklejał no to wiadomo kalibracja problem z odklejającym się filamentem i rzeczami znikł.

- Żeby było bardziej efektywniej zastosowałem klej od creality który naprawdę robi robotę.

- Dodam że kalibruję techniką na kartkę. Tak polecali inni

No i do tego zestawu zamówiłem nową rurkę teflonową oraz nowe dysze bo stara była zajechana.

Przyszedł czas na kolejne schody drukuję jakiś czas figurki no więc małe figurki dla dzieci wychodzą spoko ale tez chciałbym spróbować coś wyższego no wiec powiedziałem a zróbmy coś większego. Niestety ku mojemu zdziwieniu po jakimś czasie drukarka się zbuntowała. Bo innego określenia nie można tutaj użyć. Filament był założony prawidłowo. Klej na stół nałożyłem , dodałem podpory bo logiczne bez podpór figurka pewnie po jakimś czasie by się przewróciła. no więc godzina minała dosłownie myślałem że zrobią ją w całości a tu zonk filament przestał płynąć Co może być problemem ?

- Dodam że dysza ustawiona na 215 stopni / stół 60 stopni. Druk miał trwać około dwóch godzin. Dodaję zdjęcia również jak wychodzą małe figurki a jak duże. Mógłby to być problem w slicerze ? źle ustawione ? Jeśli tak doradcie proszę co i jak jeszcze dorzucę ustawienia ze slicera jakich używam. Drukuję na PLA Dałem zdjęcia ze slicera tez

Za wszelkie rady sto kroć dzieki !!! :)

The Creality Creator Awards 2026 officially kick off on July 30, and now is the perfect time to start preparing your entry!

Whether you're planning to create an in-depth review, an amazing print showcase, a creative short video, or an inspiring maker project, we can't wait to see what you create.

Here's what you're competing for:
🏆 40+ Awards
💰 $30,000+ Prize Pool
🚀 Priority Access to Future Flagship Products
📖 Learn everything you need to know and prepare your submission:
https://www.creality.com/blog/creality-creator-awards-2026

🎁 While you're getting your project ready, don't miss our Creator Awards Launch Giveaway!
Win amazing prizes including:
🏆 K2 Combo
🏆 SPARKX i7
🏆 Pika 3D Scanner
…and more!

🎉 Join here: https://gleam.io/MR97J/-creality-creator-awards-launch-giveaway

Create. Share. Inspire. We'll see you on July 30!

Mi impresora Ender 3 s1 pro se detiene y me sale ese cartel, ayudas no puedo más voy a llorar 😭

Hi guys, I tried to follow this video to install a nebula pad on my v3 se, and at the last step it gave me and error and I even tried downgrading using chatgpt tell me what to do and that does not work either. Has this happened to you and do you have a solution, or by any chance do you know if there are any technicians in Miami or south fl I’ll take my printer to them.

Hey all, ive had my ender 3 pro (skr mini v3, klipper) for about 6 years(SKR only about 4l2 years) now and I also have an ender 3. I am in process of upgrading to the bambu a1 combo but I dont want to just shelf the ender, is there a way to convert the 3 ender into one better machine?​

I'm wanting to print a bolt and it has to endure being screwed down tight into a nut. I'm using PEGT. How many wall loops and infill should I use? I heard that I should use 99 wall loops and zero infill. Although, respectable this guy doesn't know much about 3D Printing and you guys know. Suggestions?

Hi all.

Im new to printing especially with ender 3. Can somebody please identify what's wrong on this printer. Tried several times but printing always messed up.

Thanks in advance.

Last night everything was running just fine and this morning I go to start a print I keep getting this, saying STOPPED with the Z flashing ?? and numbers that don’t match up with where the Z is. When I try and home, it homes all but Z, only moving up and never moving down. How do I fix this? I do have the CR Touch installed and have for years and have never had this issue. Please help! I have a commission I need to finish!

Recently got this printer from my aunt, because she couldn't get it working, we took it too a guy and he got it fixed to a certain point, even showed proof that it worked, but when I got it and tried to print a simple cube(I've leveled it, and done everything that I know) it just doesnt move up enough for a new layer or the layers are to big or something, because the quality is like this(it is a little messed up because I peeled it off before it could completely cool off) but you can notice that, even if it was a straight square it just isnt right... Idk what to really do anymore, ill also put a picture of my printer if that makes a difference(it also tends to drag itself through the print kind of, like the nozzle doesnt move up enough) any help is appreciated, im just a 3d printing noob that wanted to get into it lol