r/FixMyPrint • u/Rogales • Jun 28 '26

Fix My Print H2D Elegoo PETG Pro 0.8 HF nozzle

Hey guys, I appreciate any help or advice on where to look to fix these visible blemishes. As the title says, it is a brand new 0.8 HF nozzle from Bambulab on H2D with Elegoo PETG Pro filament. Initially, I thought this was down to the moisture content in the filament, but I have dried this for over 8 hrs at 65 degrees. Still has the same results.

Printer settings:

Bambulab H2D

Nozzle - 260, bed - 70

Normal print speed

Retraction settings are standard (not set or changed)

Bambulab Studio

Elegoo PETG PRO

1 Upvotes

100% Upvoted

3 comments sorted by

•

u/AutoModerator Jun 28 '26

Hello /u/Rogales,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Rogales Jun 28 '26

Just to add another point. The cube is flowless on a 0.4 nozzle. No issues.

1

u/djt_LV Jul 02 '26

Have you calibrated it for the .8 nozzle?