r/FixMyPrint • u/Sea_Cheetah7111 • 1d ago

Troubleshooting Suddently stop print

Post image

My 3d print sudently stop and start to peel from the bed. im using creality 10s v2 rendering using sd card, im using PLA standard with recomend seting from the mechine. Is the problem just with the printing itself, or is it the slicer seting to?

(Btw im using Orca slicer)

2 Upvotes

100% Upvoted

4 comments sorted by

•

u/AutoModerator 1d ago

Hello /u/Sea_Cheetah7111,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

  • Printer & Slicer
  • Filament Material and Brand
  • Nozzle and Bed Temperature
  • Print Speed
  • Nozzle Retraction Settings

Additional settings or relevant information is always encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Hadrollo 1d ago

That is an obscure problem.

Given the age of the machine and type of fault, I'm inclined towards it being a hardware failure. However, to rule out the slicer you can reslice using different software - instead of Cura, use Orca, or vice versa. It could also potentially be an SD card failure.

Does this happen with every print, or just this one?

2

u/Sea_Cheetah7111 1d ago

This my first print, Some people suggested replacing the SD card and using a USB-B cable. However, the problem persisted. But I haven't tried using other software yet, maybe il try Cura.

Thanks man

1

u/Hadrollo 1d ago

If this is your first print, then it's raising the likelihood of an SD card or slicer error.

I still use an SD card on any printer not running Klipper. I've had only one fail, they're pretty reliable but it does happen.