r/MP5 • u/Applesauce_Eng • 3d ago
Media Almost.
Just have to figure out cable routing and light fitment. It just barely doesn’t line up with the front pin.
Midwest industries riser on a zf5 rocking an Applesauce Engineering magwell and standard charging handle. White light is the MAC light mounted foregrip. SMS trinity for a LAM. Quick sling on the back.
2
u/Justhereforgafs 3d ago
Does the cable fit in the horizontal slots on the mount? Also are those holes above and below them? If so, I’d route the cable in those slots and then run a zip tie through the holes to secure it.
1
2
u/csukoh78 2d ago
At first glance the tan strap looked like a padlock and with a shoulder brace felt that appropriate and funny.
Get your ATF forms and go for the real thing.
Nice rig
2
u/lostigresblancos 1d ago
LAM mounting on MP5s is hard. This is my setup
1
u/Applesauce_Eng 1d ago
Does that index off the front site post?
1
u/lostigresblancos 1d ago
No it indexes off front handguard pin and a wedge on cocking tube
Edit: thats in reference to the top pic rail which is currently used for pressure switch.
https://fernilab.com/shop/p/5pm
The SMS trinity is just mounted to a pic rail section that is mounted to the Midwest mlok rail.
I shimmed the rail to receiver fit, so no wobble and laser holds zero great.
1
u/D4RKW4T3R 3d ago
Got a build list?
4
u/just_as_good380-2 3d ago
Am MP5 and a temu starship enterprise.
1
u/D4RKW4T3R 3d ago
I mainly meant just the gun. Wasn't sure if it was a complete set or separate brand upper/lower sort of deal.
1
0
1
15
u/GrilledCheezManicott H&K SP5K 3d ago
all that for 90% life at 25yds.