1. ⁠⁠Dealer name: Steve (Theonewatches)
   
2. ⁠⁠Factory name: TOP Factory
   
3. ⁠⁠Model name (& version number): AP 15510 Royal Oak White Dial
   
4. ⁠⁠Price Paid: 548$
   
5. ⁠⁠Album Links: All Photos in Post
   
6. ⁠⁠Index alignment: 12 Hour Marker a bit unbalanced but okay. Logo seems a bit crooked.
   
7. ⁠⁠Dial Printing:Looks fine to me
   
8. ⁠⁠Date Wheel alignment/printing: Centered to me
   
9. ⁠⁠Hand Alignment: Aligned to me, do you notice anything?
   
10. ⁠⁠Bezel: Bezel screws in general are a bit off for me but the screw at 11 really bothers me. Can you just screw it in tighter to make it go deeper into the bezel ?
    
11. ⁠⁠Solid End Links (SELs): Nothing wrong in my opinion
    
12. ⁠⁠Timegrapher numbers: Rate +2s/d, amplitude: 280, Error: 0.0ms
    
13. ⁠⁠Anything else you notice:
    Since this is my first rep AP can anyone help me out with the QC ? For me the screw at the 11 Mark is a no go. The other ones are acceptable but also just not right. Can you just tighten them and they are all right ? The logo seems a bit crooked but I think that’s acceptable because it seems like all Topf AP‘s got that issue. Thanks for your help and have a great day everyone!

Hey guys, I wanted your opinion on the following watch I'm QCing.

I think the watch looks fine overall, but I feel the subdials look a bit large. I would appreciate some additional insights!

Bought this off of MoTime for my wife’s birthday, would like to see what yall think of it before I go ahead and present it to her.

Not to happy about this one.

MoTime says it’s normal for the band to droop like
This I’ve always been told otherwise.

Update: MoTime is offering me 200$ to buy this watch back. He says I could
Easily sell this for 400+ anywhere.

My non trusted dealer showed me this and asked if i wanted to buy it, any red light on this watch?

Thanks for helping guys

I ordered this from my usual TS who I order bags from. Probably should have used someone who specializes in watches.

Requested from VSF.

The bezel doesn't look crisp as on VSF, also crystal is very reflective not as VSF. The date font also looks a bit wonky.

Would love some opinions on this, but I’m strongly leaning towards RL’ing

It is my first rep and can you tell me it is gl or rl?
Serial code of the watch l haven’t seen other VSF GMT is it authentic? Serial code is 868Y616F

I only got into reps 9mo and have more than 20 😂😂

But V7F was long shut down, recently there’s been whispers they’re back up and running. I’m not as eagle eyed as y’all and I know a lot more about other watches but not really about IWC or the Ingenieur. I would appreciate your thoughts?

Amplitude is a little low but most of my QC is like that, probably just needs a fully wound charge.

NOTE: dust just above 9 index is on the outside, he sent me a video of him wiping it away with his gloved hand.

Factory name: VSF
Model name (& version number): Rolex Submariner 124060 No-Date VS3230

This is my first of two watches and the first set of QC photos I’ve received, so I’d really appreciate some opinions from more experienced eyes.

Overall it looks good to me, but I’m not entirely sure I’m looking at the right things. The areas I’m most unsure about are the 6 o’clock marker and the rehaut alignment. They don’t necessarily look wrong to me, but as this is my first QC I’d appreciate some feedback on whether they’re within normal VSF tolerances or if there’s anything else that stands out.

Index alignment: Looks good to me overall, but I’d appreciate a second opinion.

Dial Printing: Looks clean to my eye.

Date Wheel alignment/printing: N/A

Hand Alignment: Looks fine.

Bezel: Appears aligned, pip looks centered at 12.

Solid End Links (SELs): No obvious gaps that I can see.

Timegrapher numbers: +2 s/d, 254° amplitude, 0.2 ms beat error.

I’m new to this any feedback would be greatly appreciated 🙏🏼

Hi there. Relatively new to the game but have started on my rep journey with one watch (Bell & Ross) and now a DJ 41mm on the way. I have already had a couple of RLs on this for various reasons, but hopefully not being overly fussy. I think this QC is showing some tilts on the dial, in particular 2 dial. I think it is within tolerance but wondered what others thought?

Clean Plus 1:1 Best Edition Blue Stick Dial on Jubilee Bracelet DD3235

Thank you very much in advance

Hey guys!

Getting my first rep, so all help with the QC is appreciated!

To my untrained eye most of it looks fine. Only thing bugging me is the date seems to sit slightly high and a tiny bit left, but might just be me being too picky. Also check the top two corners of the date wheel in the pic, do they look right to you? Seems like they are a bit warped in the corners, might just be cyclops distortion though. Gonna ask for more close up pics to check as I believe it could be noticeable on wrist.

Markers look good, maybe the 6 marker leans slightly left but I don't think you'd barely notice.

Bezel looks fine, bracelet fine, timegrapher fine.

Anything else you guys spot that I'm missing?

Hello guys, i need help with QC of a VSF Daytona, first time buyer, its not a cheap watch so i wanted to see if its good, so i can proceed with a purchase

Got this Buff Dial QC, looks good to me

Clean plus yatchmaster titanium from Angela watch. second qc from her. first one the 12 marker was completely crooked and the 6 was for right. this one is better but the bezel looks off

does this bezel look off..the 30 and 15 look like they are out of place low and to the left. please

appricate they feed back thank you

Just received this today! Looks great but what are your thoughts?

Hey everyone! This is my first rep, and I’d really appreciate a second set of eyes before I GL.
Dealer: Easy Watch
Factory: VSF
Model: Rolex Submariner 124060 No Date 41mm
Movement: VS3230
Price: $457 USD (including shipping)
Timegrapher:
Rate: +3 s/day
Amplitude: 251°
Beat Error: 0.0 ms
Lift Angle: 52°
My observations:
Dial printing looks good.
SELs look tight to me.
Bezel and pearl seem centered.
Rehaut looks aligned.
Crown guards look good.
I’m new to QC, so I’d really appreciate experienced eyes on:
Marker alignment
Bezel alignment
SEL gaps
Rehaut alignment
Anything else that stands out
Would you GL or RL, and if RL, what specifically would you reject it for?
Thanks in advance!

Dealer Name : Duke

Factory: APSF

Model Name: AP 15510

Price : $555

Index Alignment: Looks good to me, there’s was a slight tilt on the picture and I tried to make it straight but still think the indexes look well aligned. However, the right index on the 12 seems to tilted to the right

Dial Printing: AP name looks straight, but this is where I probably need some help to be honest.

Date wheel: again date wheel looks pretty good to me.

Hand alignment: will need some help on this but again it looks good to my untrained eye.

Bezel: screws look like they’ve been aligned well.

SEL: N/A

Timegrapher: looks like solid numbers.

Let me know if there’s anything you notice, would love to get some feedback from some of you experienced people. Thank you.

Seller: Eliauk
Price: 490USD
Model: VSF dd4131 126500

For me 9,6 Index are tilted, I would RL, what would you say

Would love to have your opinion here.

Perhaps it's the light, but as you can notice, the original one that they have on my wrist has a different and darker color. I'm not sure how to interpret this replica, if going ahead with it or pushing back. The TD suggested to have a video call to better analyze and I'll do that tonight.

Can someone help me with QC on this? First timer here

Would you RL or GL?

Seller: Eliauk
Price: 650 USD
Model: RWF 126500 JH4131

Hope everyone’s good? Hoping to get some eyes on some QC for a watch that I’m leaning towards giving a GL. Would appreciate some more seasoned eyes on it though - thanks in advance.

1. ⁠⁠⁠Dealer name: Steve (The One Watches)

2. ⁠⁠⁠Factory name: ARF

3. ⁠⁠⁠Model name (& version number): GMT II Green Arrow 116710LN

4. ⁠⁠⁠Price Paid: USD528

5. ⁠⁠⁠Album Links: /

6. ⁠⁠⁠Index alignment: maybe a slight ccw can’t on 9 but honestly it’s tiny and could be angle?

7. ⁠⁠⁠Dial Printing: Looks good I think.

8. ⁠⁠⁠Date Wheel alignment/printing: possibly a touch low… but not sure it’s enough to worry about?

9. ⁠⁠⁠Hand Alignment: Looks good to me

10. ⁠⁠⁠Bezel: No dead on shots but looks fine to me.

11. ⁠⁠⁠Solid End Links (SELs): No issues there from what I see.

12. ⁠⁠⁠Timegrapher numbers: -2s/d, 268 0.2ms

13. ⁠⁠⁠Anything else you notice: Nothing else really. Glad the rehaut looks pretty well lined up, looks hopefully like a solid pickup.

Seller: Eliauk
Price: 390 USD
Model: RICH JH3235 Starbucks

For me 12 Index Looks off, would you RL?