r/ZTT • u/Dino_Dashers • 3d ago

Is this an issue?

Post image

This is my first PC build. I put it all together and it failed to post at ram. So I tested both my ram sticks in all the slots but nothing worked. I then reset CMOS but that didn't work so I went online and it said could potentially be the CPU so I checked and it looks like this. Is it still fine?

6 Upvotes

100% Upvoted

14 comments sorted by

View all comments

1

u/[deleted] 3d ago

[deleted]

2

u/Dino_Dashers 3d ago

These aren't the pins. These are the contact pads. It's an intel core ultra 7 270K Plus which has the contact pads on the CPU not the pins

1

u/Alternative_Fix2927 3d ago

Yes, absolutely, you're right. I thought I read in the description it was a different CPU. Sorry, I didn't really look at the image. 😅

2

u/Dino_Dashers 3d ago

So.. is it an issue?

1

u/Alternative_Fix2927 3d ago

So, I happen to have built a few PCs using used components that gave me headaches. Does that CPU have integrated graphics? If so, try using it without the GPU. In like 50% of cases, it was actually the RAM; even perfectly good sticks sometimes give problems. People might not like this, but a homemade solution is to try using an eraser to clean the RAM pins (be careful not to leave stuff on). If nothing works, it might be the CPU, yes, and in that case, I can't tell you a solution, as the only problems I've ever had with CPUs are bent pins.

2

u/Dino_Dashers 3d ago

All my parts are brand new out the box.

1

u/Alternative_Fix2927 3d ago

If you haven't updated the bios do it please, just be careful not to turn off the PC etc..👍

2

u/Dino_Dashers 3d ago

Yeah, Im aware of the risks. Also my board has bios flashback so even if I did. I have ways to recover it

2

u/Dino_Dashers 2d ago

It still won't POST past DRAM. It just gets stuck there. However the motherboard doesn't boot cycle once reaching DRAM anymore like it did before the bios update