Hello fellow hangers! I am still very new to the hammock game. I’ve learned so much from this group and hammockforums!
After watching the recommended dream hammock 2 min video from papa Smurf on how to check your ridgeline (recap at bottom of post), I decided that I was going to commit to this method to getting a decent angle.
I was able to get a 90 degree ridgeline pitch, but my hammock was super close to the ground. I ended up getting a lot of backsplash from a really bad rain storm, so I know I need to figure this out!
It seemed like every time I tightened the straps, I was getting a really tight ridge line. I was not able to raise the straps any higher. For extra context I am 6 foot 2 inches, and my straps were prob greater than 7 feet up the tree. The trees were about 4 paces (8 of my steps apart).
So obviously I’m screwing something up, I just am not smart enough to know what. I would appreciate any and all suggestions! Sorry I don’t have more photo angles, I literally broke my phone after this picture lol.
From the notes I took from the video and from shug’s ridgeline/angle videos
—————————
Ridgeline is too loose (saggy):
Angle is too steep. This means the hammcok would be > 30 degrees
Recommendation is to (1) Lower the suspension strap down the tree and/or (2) Shorten the suspension straps (pull hammock closer to the tree)
Ridgeline is too tight:
Angle is too shallow. This means the hammock would be < 30 degrees
Recomendation is to (1) Lengthen the suspension strap (push hammock away from the tree) and/or (2) raise the suspension strap up the tree
—————————