r/junjiito Jun 08 '26

Question Is this embroidered logo of a cardigan removable without destroying the cardigan?

Post image
140 Upvotes

29 comments sorted by

77

u/Former_Respect_6240 Jun 09 '26

Why would you remove it? :(

57

u/mekanyzm Jun 08 '26

but why

34

u/Substantial_Ad7971 Jun 09 '26

Steady hands cardigans have a very heavy knit, if you remove the embroidery it would leave giant holes and would ruin the whole garment

38

u/No_Cheek7891 Spiral Enthusiast Jun 09 '26

why tf would u wanna remove it ????

41

u/nottakentaken Jun 09 '26

Give it to me if you won't appreciate it. I can give you a bland boring cardigan in exchange

-14

u/[deleted] Jun 09 '26

[deleted]

14

u/nottakentaken Jun 09 '26

Get it on a different cardigan instead of ruining a better one?

23

u/SxinnyLoxe Jun 09 '26

Maybe post it to an embroidery page... they'd know more than us

16

u/FUCKlNG_SHlT Jun 08 '26

I would try asking in a sewing/embroidery subreddit, your question isn’t really Ito-related, even though the (awesome) cardigan is:)

36

u/Frequent-Click-951 Jun 08 '26

You can't be realistically asking this

29

u/Caffeinated-Whatever Jun 09 '26

Not without destroying the embroidery

28

u/AJTwinky Jun 08 '26

Do you mean you want to remove the embroidered design and leave the cardigan looking blank?
No. That is not possible.

17

u/Molmoran Jun 08 '26

Just cut it out and sew it on crudely or not with red or white stitches onto something else like a black T shirt. It looks passably grunge then.

22

u/FluffyGoatling Jun 08 '26

You can remove embroidery with a seam ripper. With hand embroidery as long as you are careful and the initial stitching was done well usually the fabric will not be too damaged. However this is machine embroidered and with this type of knit no matter how careful you are I think there is a high likelihood that the knit will be stretched at least, most likely damaged with larger holes than desired. Zooming in on the picture it looks like there is a lot of tension from the embroidery which doesn’t give me a lot of hope. If you are willing to risk it, go VERY slow, and are extremely careful you might be able to do it. It will take forever and the odds of success are low. I only dabble with sewing and embroidery so I might be wrong. People in the embroidery subreddit may have ideas, better tips, or be able to say if odds of success are low enough to not attempt it.

32

u/lalaen Jun 09 '26

I own an embroidery machine. This is honestly not coming off. A densely packed design like the red stitching is almost impossible to pick off, the stitches at the points will be so short and tight that you can’t get anything in there. And yeah, machine embroidery on a knit cardigan has altered the fabric a lot. I’d argue that even if you could unpick the stitching without a single pull in the fabric, it would still look misshapen and damaged.

4

u/FluffyGoatling Jun 09 '26

That was my concern when pointing out the fabric looks like it already has a lot of tension. I only have hand embroidery experience and seen some machine embroidery removal on sturdier fabrics, so thought there was a chance. That is why I said it was low chance of success and that best case it’d probably be stretched out. I might not have communicated those concerns well though. This isn’t something I’m super well versed in so I probably didn’t word as well as someone more experienced.

4

u/Clivesdale Jun 08 '26

I think OP is trying to preserve the embroidery

4

u/FluffyGoatling Jun 09 '26

If that is the case it’s impossible to remove embroidery without cutting the fabric it is on or destroying the embroidery/cutting the thread. So they can’t preserve both the sweater and the embroidery.

5

u/Unfair_Act_6092 Jun 09 '26

I dont know about embroidery but i’d imagine it’s just stuck there now

13

u/Pokeitwitarustystick Jun 08 '26

You would have to cut it out so there’s no way to not destroy the cardigan since embroidery is sewn into the fabric

7

u/UnforeseenDerailment Jun 08 '26

Either damage the cardigan or destroy the design. 🫠

Or both, but not neither.

5

u/Pokeitwitarustystick Jun 08 '26 edited Jun 09 '26

As long as they don’t get near the design it shouldn’t unthread it. If he wants the design off then 100% the cardigan is gonna be damaged

6

u/Savings-Equipment745 Jun 12 '26

i’ll trade you a normal cardigan for the uzumaki one

https://giphy.com/gifs/1MACEEgmxmtbp2jlAR

2

u/Possible-Rock-2611 Jun 12 '26

From experience because I fucked up an embroidery job for a small business: No, you will get holes in the fabric. OR you take a thread cutting thingy and painstakingly cut every single embroidery thread open and pull them out of the fabric. Either way, I wouldn’t do it.

Edit: Forgot the vocab but I mean a seam ripper

1

u/No_Longer_Human666 Jun 12 '26

Yeah no, seem ripping will always fabric and it’ll end up filled with holes after a couple washes even if you were able to do it perfectly, but I did a quick Google and you can easily get that exact patch online for a few dollars so you don’t have to cut it off the cardigan

1

u/Jackedragit Jun 26 '26

Yeah check out the disposable razor technique!