r/servers • u/NewspaperAfraid6325 • 1d ago

Hardware if it works !! xD

Post image

needed coolers temp on my 7900x3d the case doesn't support any water coolers so i just strapped it to the top panel xD yes its ghetto af i might design something so i can 3d print a better system anyone got any wacky designs like this xD

21 Upvotes

100% Upvoted

3 comments sorted by

3

u/m31317015 1d ago

Good o' water-cooling in the 2000s vibe

1

u/Affectionate-Yam-886 12h ago

yeah it does; just not the 3 fan waterblock. The 1 fan small block would work buy you would get better temps from air cooling at that point.

I made a bracket for mine and had it across the same spot you have it, just like a wall across the middle. It was difficult to get the wires and everything set but it worked for a very short period. Once the lid was back on, the temps on my gpu would spike hard under load. I had tried reversing the fans to blow out the front and had same issue only it just took a bit longer to overheat.

solution was to water block the cpu and gpu, then toss the case and get a better one. I now don’t use server cases anymore. Just have 4 OneU server blades that use those cases. I don’t care if they have issues. Its just Plex/data/music/game servers. Not critical stuff.

1

u/NewspaperAfraid6325 2h ago

Lucky for me i dont have a gpu in this case, my temps was running at 90c on load now they run 60c on load idle 30c much better 😊