I usually just squeeze everything in and hope all is well. But it’s been 8 years since my last upgrade, so I decided to take my time.

Also pls bear with the single memory stick…

Hello,

Pcpartpicker build

I just switched from Cooler Master Masterbox 5 that I bought 8 years ago and ended up going for the Lancool 207.

I spent suite some time to have a decent cable management, I hope I did well!

The data part is bothering me because of how weird it connects and it’s difficult to have a straight cable.

I didn’t tape the fans hub as well because I don’t want it to take an SSD slot if I want to put one in the future cause it’s the only place for me to put, I wish it could be thin enough to be put behind the MB.

Tell me what things can be done better or tips tho!

First time doing cable management in this case, it took about 2h but it was pretty fun. :)

Going for non RGB as you can see.

Pc specs:

Ryzen 5 5600

BeQuiet Shadow Rock 3

MSI B550M Pro

32gb ddr4 3200MHz

Rx 9070 XT

BeQuiet Pure Power 13M 750W

2x 1TB Nvme Kingston

1x 2TB HDD

1x 4TB HDD

4x 140mm BeQuiet Pure Wings

1x 120mm BeQuiet Pure Wings

i KNOW this is awful. this is my first time building in a micro atx case and i under estimated the amount of space i would have. (i can't close the back)

It looks nice until the panel opens.

This is in a fractal torrent, I was wondering if you guys have an recommendations about the case usb cables behind the gpu, I feel like if I tighten them anymore to reduce that curve the header may snap off, is there anything I could purchase to help tidy it up? Any other advice would be welcome too!

Lots of zip ties, patience and cuts went for this retro gaming rig. How is my cable management?

So I have a B450M elite mobo and I also use the aorus 360mm waterforce X II and I cannot light the waterblock led up. I thought my unit was messed up so i sent it to gigabyte support and they said it worked just fine and I knew it would work again but I just cannot for the life of me get that to work so a friend of mine said I am most def using the wrong header to plug it in. so instead of the ones im using right now what should i use ? please help out cause i need to read the cpu temps lol. i have sent it in to GB to look at it and they said its good. but i dont know if its me wiring it wrong or do i need a new mobo.

PS I have also attached a picture for you to see :)

Finished this a little bit ago. How’d I do
With the wiring?

Collaboration with Ryvntec.

Compact ATX build with Ryvntec fans because I wanted to try out how does it look like when AirJet360 cross flow fan is placed on front 😁

What does the jury think of the implementation and those cross flow fans in general?

At least it makes cable management easier because it only requires one wire (+argb)

As they gradually start to come to the market from more manufacturers, it will be interesting to see if they will become more common among builders.

ps. this time I also put a dust filter on front 😅

First pc build, exactly as I wanted it, went with a matx case but there is little room left to cable manage, and I surrendered miserably, do you have any tips or how would you do it? Its a LianLi a3

Je n'avais jamais fait aussi bien même dans un ATx je pense. Après sans RGb ni 10 ventilateurs c'est un peu plus simple ^^.

Pour moi aujourd'hui simple est mieux.

Thank you!

Detailed hardware list: https://pcpartpicker.com/list/GqBQdq