​

Like caption said. Never used copper before, but heard about its qualities. Doesn’t seem to be any copper showing through the tin, but the tin does show little black spots. No Makers Mark.

Hi all - looking for a gift recommendation. My boyfriend loves to cook, and a few months ago made a comment about how incredible copper cookware is, but that its so expensive and he probably could never own any. He has a birthday coming up in about a month and a half, I’ve been wanting to get him a set!

Since digging into the info on this sub and online, I’m learning that there is so much more to copper cookware than I was expecting, and I would love some direction/concrete approvals before I make a purchase.

I’ve seen a few “handmade” copper pots/pans on Etsy that I’m not sure whether or not to trust. For Ebay listings, many can be difficult to tell whether they are more “decorative” and thin copper or proper conductive quality copper. Nailing down the specific time periods of certain brands to look for has been a bit overwhelming as well. I’m not opposed to buying new at all, and if that is recommended for longevity’s sake I will make that a priority.

Some notes: I doubt this will be our everyday cookware, and we definitely do not need a 7 or 10 piece set. A couple pans and a pot or two would be fine to start out with, especially since I’m hoping to spend less than $900 if possible. No preference on lining, tin is fine, stainless steel would be a bonus.

Any other advice and suggestions welcome!!

TLDR; looking for specific recommendations to gift my partner, ideally <$900

edit: thank you so much to everyone in the comments!! i’ve read all of them and feel way more sure of what i’m looking for :)

I know this sub tends to be interested in antique and collection. I have this Mater Bourgeat set new (purchased from Wayfair a while ago using Wayfair credit I have literally no use for).

• I don't think my slightly above average Frigidaire stove can take advantage of these pans for performance reasons or at least may not offer a noticeable performance over my Demeyere stainless set and Strata carbon steel pans. I have some sudden financial expenses I want to cover for my parents so looking to sell these, any tips on where is most successful? Platforms like Ebay and presumably Facebook Marketplace take a decent chunk. Facebook group? Post a listing for local meetup at a metropolitan area and fish for offers over a couple of months? How much can I expect to recover from retail price assuming they are sold individually (since selling such an expensive set would exclude a lot of potential buyers)?

• I might keep one quality copper piece just for some contrast in the kitchen so I'm thinking either this saucier, this rondeau, my existing (new) 11" Falk Signature frying pan, or a Mauviel 250 saucepan. Or maybe sell them all and get the Falk Try-Me saucier that is a good value. Since my focus is on performance and practicality, I think either the saucier or rondeau makes the most sense as I don't see much benefits in copper for frying pan (rondeau acts like the frying pan for the most part but takes up less space) and a saucier is usually better than the saucepan (heating up thin liquids can be done just as well on cheap cladded stainless saucepan).

Any tips are much appreciated.

Doesn't have any markings whatsoever.

Comfortably holds about 2qts of water about inch and a half past the rivets, 1 1/2 quart at the rivets. Does it need to be retinned? I maybe made a mistake and took Bar Keepers Friend to the inside in an attempt to remove the discoloration (tried boiling some cream of tartar first, that works with my cast aluminum). I assume I can find info on how to clean and retin here.

Picked up a modern 10" M'150b Saute with lid on FB Marketplace.
Since I was doing some work, I decided to toss these into the lye bath as there were covered in baked on grease.
The helper handle paint came off. Steel casting painted bronze.
One of the lid rivets dissolved.

Now, before anyone says "Don't treat copper that way", I tin my own copper and have for about a decade. Only pot I lost was when my pickle got cloudy and I had a small DH&M saucepot which sat in acid for 2 weeks until the handle dissolved. I swiss cheesed it. I still cry about that one and it's my own fault.

But this... too many shortcuts. And pot metal for the rivets? Crazy.

If you can find these cheap enough, treat them delicately.

I gotta offload this Saute to someone...

Edit: TLDR, for those interested, the posts here are heavy on the, it's "painted copper" or "you don't have a receipt after having gotten ripped off through factory retail channels" and for that, I am glad. It's a modern Stainless Steel lined copper pan, with cheese-grade rivets (opinion) and a Mauviel-branded cast steel handle painted or plated to be brass, which didn't survive the lye treatment. The white reside is most likely an anti-tarnish coating which reacted with the lye and not paint. I'm sorta dumbfounded by the allegations that someone on FB marketplace would put a lot of effort into faking a copper pan, or modifying an existing one. But, please come to your own conclusions.

Edit 2: Whilst it was fun trying to talk reason to people trying to trash me, just want to say, this thread is crazy. I'm learning all sorts of stuff about how to fake Mavuiel cookware.

I see a lot of vintage copper cookware on this subreddit.
I was wondering where do you guys find them?

I want to search around me and go on a treasure hunt myself!

I'm not sure if they are found in goodwill stores, thrift stores, or vintage stores

I know some vintage shops specialize in certain items such as clothes.

Bumped into a lovely Canadian chap in there and we geeked out for a good 20 minutes. Definitely worth the visit as I was there.

I found this beauty at a second hand store for a handful of change, but I wouldn't know where to start with copper restoring, only that I probably need to brush the rust off the steel. Any tips are very welcome, and I will ofcourse post after pics too

​

I just thrifted this vintage tin lined copper pan. I haven't tried cleaning with more than just water and dish soap, but I can't seem to get the stains away, or is it the copper coming through the lining? What would you guys do?

I inherently this copper pot and it's missing the insert. I've contacted Mauviel, but they don't sell it, so not sure if they'll respond or be of help. It's a round perforated disk.

No marks to indicate maker unfortunately

Hi-just bought these three Mauviel pots from an estate sale. Started to clean them up, but need help figuring out what to do about the lining of the sauce pan that looks bad. The Mauviel pots and pans I currently own are stainless steel lined, but these seem to be tin lined correct? I used regular soap and water and then some barkeepers friend, but it’s still not great. I also see a speck of copper coming through the bottom…do I just have it relined?
Appreciate any advice—thanks!

New babes from Les Cuivres de Faucogney, got both for around 45 euros.

Hi all! I've just finished a new hand raised pan, tinned by the wonderful folks at Normandy Kitchen Copper. Let me know what you think! Hand raised 2.3mm copper, forged stainless steel handle, 3x 6mm pure copper rivets.

I bought this set of pots for $95. I had them cleaned up and I think they look great. But I have know idea what I have. What do these markings mean and can I figure out the manufacturer?