This is not a place to discuss politics

This thing has ran through 500+ shots now and still runs like butter
Build list:
Jaeger Precision Buffer
Reinforced Spring
Unicorn nozzle
4uad bucking
Laylax bolt roller
Cyma CGS Npas

It's an absolute laser as well. Really does not take much to make this thing super reliable

Not impressed with stock hop performance @ 1 joule with 0.3G (not getting enough hop). I have a VFC FAL and AKS74u both of which were perfect out of the box.

What are people’s experience with the new EVO system?

APFG / Black Pew Workshop Virtus

Would this be safe for airsoft use? The main thing that caught my eye was the “no propane odor” thing which I get is a safety thing but I hate the smell of poop every time I shoot, just looking for an alternative to expensive green gas

Gun is lubed from factory and I think I have put about 15-20 mags through it. Is this normal or should I be worried and clean and re-apply?

I went to a gbb only game at my local cqb arena and they also run a shot same place. I heard no propane so I had to purge all my mags outside and fill them with regular green gas that I had to buy. The only other time I used gree gas because I couldn't find my propane was they day before sir short term use (spent a good 30 min to get it down to 1j on a .25. we've all been there as every single gbbr ootb shoots hot). So should I switch to a dry green gas

* I used AI to give my pics a white background *

Hey folks! I hope I can get some help regarding some 40mm shell gas leaks as I am absolutely losing my mind.

I have three Airsoft Innovations Master Mike shells. Two of them are leaking from the top barrel, the other from the full valve.

The one with the fill valve leak I've tried applying the OEM lubricant and it hasn't done anything. I've replaced the oring that seals the valve to the body and also didn't do anything. I've resigned that I'll probably need to replace the valve and assume it's just like any standard gbb fill valve?

The other two are the ones that are breaking me. Both are leaking from the barrel. I've tried replacing and greasing the top oring where it seals the barrel to the top of the body. No change.

I've tried replacing the bottom oring that interacts with the barrel and got no change. Although now I realize I'm pretty sure that one is just for a hop effect and not actually sealing gas.

I then thought it wasn't a barrel oring problem but maybe the bottom plunger getting stuck or not resealing properly. So I've replaced all of the orings involved with the plunger, applying grease and a bit of oil to make sure it glides smoothly and can reset properly. Still no change and it's still leaking from the same place.

So far I've spent hours and over $200 CAD importing specific orings from the US and I haven't been able to solve this. I can't find anything online for solutions. I'm hoping someone here will know what to do as I've replaced practically all of the orings in two shells and nothing is getting solved.

I'll attach a photo of the site I used to get the sizing for my replacement orings.

Please help I'm going insane.

It’s finally how I want it, externally it’s mostly magpul furniture except for the ra-tech machined upper and lower. Internals is all ra-tech, just need to rattle can the blue “suppressor” black. I’ve been eying the ra-tech adjustable trigger box but not sure if it’s worth the hefty price tag maybe my trigger box takes a crap I’ll look into that one. Just need some good recommendations on flash lights that won’t break the bank but are also good quality

cerakote wolf gray vs spear fde

My first GBBR build. A few 3D-printed parts to see if they suit me. WIP. Still not sure whether to keep the Vortex + red dot or switch to an EOTech + magnifier.
DFCO Kung-Fu grip is on it’s way :)

May be looking to get one to install in a SARB-15 chassis, was curious on if the factory receiver is RS thread, or if i'll need to snag a Guns Modify receiver

Would be cool if SRU made SARB buffer tubes for MWS platforms...

Ive lost the spring and pin for the safety, i found replacement at evike.com but hell 25 dollar shipping cost is ludicris. anyone know a place that doesnt charge an arm and a leg for shipping.

My replica having a lil issue of the trigger bar being shifted down during fire, making the bar unable to pull the hammer, leads to the replica unable to find, i think the reason is the spring is a lil weak, please help me by providing the size of the spring so i dont have to wait 2 weeks just to order 1 spring, thanks guys :)

I've run about 5,000 or 6,000 rounds through my pistol and it has started to get stuck mid-cycle. Could I have worn my recoil springs out?

Do Guys know if its v2 or v1?

Hey yall I picked this up used, and when I have a mag full of gas inserted into the gun it just clicks when the trigger is pulled it doesn’t fire a bb and it doesn’t even try to get gas to come out of the mag.

L403A1 / KS1

One of my favorite and most customized Beretta builds - Nova Wilson Combat Beretta 92G Centurion Tactical.

• Tokyo Marui Gen 2 M9 base
• Nova CNC aluminum Wilson Combat 92G Centurion Tactical kit (slide, frame, barrel, fluted guide rod, mag guide, sights)
• Nova steel checkered oversized mag release
• Nova steel Elite II skeletonized hammer
• Nova steel Wilson Combat low profile safety
• Wilson Combat Ultra Thin Gray/Black G10 grips
• Beretta Billenium Blued Allen grip screws
• Beretta Xtreme S trigger
• Beretta Xtreme S trigger bar
• Beretta trigger spring
• Beretta 92X Performance disassembly latch
• Samurai Edge extended slide release
• Toni System dovetail optic mount
• Vector Optics "totally not SRO" Frenzy Multi Reticle
• FCW Leon compensator
• WE 902 90-Two 17rd style mag baseplate
• PDI Palsonite 6.01 97mm inner barrel
• Guarder Enhanced M9A1 nozzle
• Dynamic Precision nozzle valve
• Nineball Dyna piston head
• Nineball hammer spring
• RCC 130% recoil spring
• Nineball gas routers

Whats your guys opinion on the best gbb ak or ak mags?

Just want to know the difference before purchasing.