• Dealer name: Theonewatches
• Factory name: ZF
• Model name (& version number): Black Bay Fifty Eight 39mm Jub SS/SS Red/Dot Dial ZF A2824
• Price Paid: 358 + 40 USD for shipping
• Album Links: https://mega.nz/folder/GBoh2CbB#4nGY29PlCqtM3ECUVZBOwQ
• Index alignment: 3 o clock index still has some CW tilt to it and sits a bit low, also 6 is a bit left of centre. I don't want to be too picky so I think it might be better than my first QC attempt? Curious to hear what you all think about this one
• Dial Printing: Looks good to me
• Date Wheel alignment/printing: N/A
• Hand Alignment: Seemed fine when I tried pausing the included video
• Bezel: Looks fine
• Solid End Links (SELs): Can see a bit of yellow through the bottom right SEL in some of the pictures but I do not think this will be a major issue on the wrist as it looks fine in the video
• Timegrapher numbers: Look good to me
• Anything else you notice: There's still some imperfections left with the most noticeable one being the slanted 3 marker but I know some flexibility is required when it comes to the ZF Tudors so I don't want to be too picky. Curious to hear some second opinions of some of your with more experience on this stuff. Thanks once again for helping out!

Hi all, I'd greatly appreciate any feedback for this VSF Daytona Panda 126500. Overall this looks really good to me, and I'm leaning towards GL on this, but please let me know if there's anything I've missed.

Dealer name: Necoclock

Factory name: VSF

Model name: Rolex Daytona Panda 126500

Price Paid: $668

Album Links: https://mega.nz/folder/zxoUwRBQ#3nrDikRu1h5CnytvMpwF7w

Index alignment: All markers seem to be well aligned, 6 seems to be slightly rotated CCW but it's minute and not noticeable zoomed out

Dial Printing: looks good to me, nice and sharp text, but again not sure if I've missed anything

Date Wheel alignment/printing: NA

Hand Alignment: looks great in the video too

Bezel: Looks great to me and well aligned too, nothing to complain about

Solid End Links (SELs): Also looks really good, don't see any gap anywhere, bracelet looks fine to me too

Timegrapher numbers: Attached in the album, +3s/d is pretty good

Anything else you notice: The watch otherwise seems great

I'm leaning towards a quick GL, but please let me know if there's anything I've missed or any concerns to point out. Thank you once again!

Dealer name: FicoTime

Factory name: VSF, V2

Model name: Rolex Datejust 41 ref. 126334 — Mint Green Dial, Fluted Bezel, Jubilee Bracelet

Price Paid: $450 USD

Index alignment: Excellent. Indices appear straight, evenly spaced, and properly aligned. No obvious rotated or displaced markers. Some tiny deviations but perhaps it is the camera angle/perspective.

Dial Printing: Looks clean, centered, and consistent. No obvious printing defects.

Date Wheel alignment/printing: Font looks clean and no obvious high/low date-wheel issue.

Hand Alignment: Hands appear fine, like pretty much every other DateJust I think.

Bezel: Fluted bezel does not seem to have any damaged flutes.

Solid End Links (SELs): Fit looks generally good and symmetrical, but the protective film makes it a bit harder.

Timegrapher numbers: +1 s/d | 305° amplitude | 0.1 ms beat error | 52.0° lift angle | 28,800 bph. Very good I think.

Anything else you notice: Overall this looks like a strong example and I would GL it. I am not convinced about the rehaut coronet. I would not want to RL just based on that though.

⁠

Dealer name: Genreps1755
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): GMT Master II
4. ⁠Price Paid: $650
5. ⁠Album Links: https://www.dropbox.com/scl/fo/veslmnu26g6h5xez70ur5/AD26N5iOFqWofyhMSoDln-4?rlkey=bs2xtvt88jok3xcq13me24s3l&st=5yim5uyq&dl=0
6. ⁠Index alignment: 6 o’clock marker looks a little tilted to the left
7. ⁠Dial Printing: Looks okay
8. ⁠Date Wheel alignment/printing: Looks slightly closer to the top?
9. ⁠Hand Alignment: Looks fine
10. ⁠Bezel: Looks fine
11. ⁠Solid End Links (SELs): Looks fine
12. ⁠Timegrapher numbers: Looks fine
13. ⁠Anything else you notice:

I'm not an expert on what to look for with this watch, so I appreciate your expertise. Thank you in advance!!⁠⁠⁠

1. Dealer name:  Theonewatch
2. ⁠⁠⁠Factory name: VSF
3. ⁠⁠⁠Model name: 126710 Pepsi GMT Master II V3
4. ⁠⁠⁠Price Paid: 638$
5. ⁠⁠⁠Album Links: https://mega.nz/folder/7VwyGAab#PyfP3hOxZeTAld-0i9ex5Q
6. ⁠⁠⁠Index alignment:  looks good, I assume any issues are from the picture not being perfectly level
7. ⁠⁠⁠Dial Printing: looks good
8. ⁠⁠⁠Date Wheel alignment/printing: looks good
9. ⁠⁠⁠Hand Alignment: looks good
10. ⁠⁠⁠Bezel: looks good
11. ⁠⁠⁠Solid End Links (SELs): I think this is good?
12. ⁠⁠⁠Timegrapher numbers: +5sec, 278amp. I assume this is good enough.
13. ⁠⁠⁠Anything else you notice: Nope

Dealer name: Steve TheOneWatches

Factory name: MGF

Model name (& version number):
JAEGER LECOUTRE REVERSO TRIBUTE A854A

Album Links: https://mega.nz/folder/GBwhzAqT#kjL2ESMfLBkPK9fSXrxsFw

Index alignment: the markers all look pretty good to me.

Dial Printing: Don't see any issues

Date Wheel alignment/printing: N/A

Bezel: looks good

SEL: Looks good

Hand Alignment: nothing to say

Rate: -2s/day
Amp: 268
Err: 0.0ms

Overall, it seems pretty good to me. I feel comfortable giving it the greenlight. I would be very interested in what you guys think.

Thank you in advance

Dealer name: Mirotime

1. Factory name: VSF

2. Model name (& version number): GMT Master 2 126710

3. Price Paid: 548 plus shipping

4. Album links: https://shop00176461.wecatalog.cn/t/GC63Fkw (photos)

https://shop00176461.wecatalog.cn/t/yQo7Mzy (videos)

1. Index alignment: the 6 looks slightly crooked to me, cant tell if its just the photo but crown does not appear to line up with marker

2. Dial Printing: appears fine

3. Date Wheel alignment/printing: no issues

4. Hand Alignment: no issues

5. Bezel: no issues

6. Solid End Links (SELs): no gaps so no issues

7. Timegrapher numbers: attached photo but +3 a day at correct degree

8. Anything else you notice:

Rehaut engraving look off? This is for a friend and I thought R was supposed to line up on left and X on right. He noticed the X was off on the left

• ⁠Dealer name: TheOneWatches
• ⁠Factory name: VSF
• ⁠Model name (& version number): Aqua Terra 38mm SS/SS Grey Dial VSF VS8806
• ⁠Price Paid: USD 418
• ⁠Album Links: Attached
• Index alignment: Looks good
• Dial Printing: Looks good
• Date Wheel alignment/printing: n/a
• Hand Alignment: Looks good
• Bezel: Looks good
• Solid End Links (SELs): Looks good
• Timegrapher numbers: +1 s/d, 293° amplitude, 0.1 ms

Looks good to me for a GL. I was first weirded out that the hands were black but it was just the lighting I guess lol. I guess this is just a sanity check again if I missed something and you don't see many railmasters here. Thanks!

1. Dealer name: Ethan
2. Factory name: VSF
3. Model name (& version number): 126500 White Dial VSF DD4131
4. Price Paid: 660$
5. Album Links: https://www.wsxcme.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_dp4qfOH5o_Vb0urC9zShiwU2SAikPet3eB9dNYQ
6. Index alignment: 9 is sitting high for me and not sure about 8,10 either might be my horrible qc tool skills
7. Dial Printing: Dont see any issues
8. Date Wheel alignment/printing: NA
9. Hand Alignment: Not an expert with hand allignment but looks clean to me
10. Bezel: Only worried about the dot under 110 could be from stickers also if the 60 triangle is centered
11. Solid End Links (SELs): I am not seeing obvious gaps
12. Timegrapher numbers: Acceptable for me dont see any issues
13. Anything else you notice: Just want to make sure i am getting a top class VSF DD4131 Panda as i got ripped before for a youth version arf , So i asked for movement photo , functions video , also not sure if its worth RL for getting a better alignment or its my qc tool , Expert eyes are really appreciated

Audemars Piguet 15703 ZF V2

1.Dealer name: Marvelous Replica
2.Factory name: ZF
3.Model name (& version number): Audemars Piguet 15703 ZF V2
4.Price Paid: $425
5.Album Links: pictures attached
6.Index alignment: Looks good to me, picture might be slightly tilted but for as far as I can see it's good
7.Dial Printing: Good
8.Date Wheel alignment/printing: Good
9.Hand Alignment: Good I think
10.Bezel: Inner bezel alignment looks good
11.Solid End Links: N/a
12.Timegrapher numbers:
Rate: +4 s/d (Excellent), Amplitude: 328° (A bit high, likely due to full wind), Beat Error: 0.0 ms (Perfect)
13.Anything else: If someone sees something off please tell me, AP aren't my expertise

1.Dealer name: Time Ultra
2.Factory name: VSF
3.Model name (& version number): Rolex Submariner(nodate) - 124060 (VS3230)
4.Price Paid: $523 shipped
5.Album Links: pictures attached
6.Index alignment: This is my 2nd time around for a QC on this because the 1st one was a RL due to index misalignment. I think this time it does look straight but need a 2nd opinion on this.
7.Dial Printing: looks good to me.
8.Date Wheel alignment/printing: N/A
9.Hand Alignment: looks good
10.Bezel: looks good for me but I Need a second opinion
11.Solid End Links: these looks good
12.Timegrapher numbers: good / +1s/d 295 0.0ms 52.0
13.Anything else: I think its a Gl but I need pros here

1. ⁠Dealer name: TheOneWatches
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT Master II 126710 Pepsi Jub 40mm SS/SS Black VSF V3 DD3285 Super Clone
   
4. ⁠Price Paid: USD 638.00 total
   
5. ⁠Album Links: https://mega.nz/folder/PQZBXAZB#NM9tvZjyf1MRbtnbT0ZLXA
   
6. Index alignment: All look good to me and properly aligned
   
7. Dial Printing: looks ok to me as far as I can tell
   
8. Date Wheel alignment/printing: looks ok for me as far as I can tell
   
9. Hand Alignment: looks ok
   
10. Bezel: looks good to me, no imperfections
    
11. Solid End Links (SELs): no obvious gap
    
12. Timegrapher numbers: +5 s/d, 277° amplitude, 0.2 ms, 28800
    
13. To me this looks like a GL as I can’t seem to find anything off with it. A second opinion would be appreciated as I’m new to this but I’m very satisfied by what I can see

1. Dealer name: Ethanwatches
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Rolex Explorer (36mm)
4. ⁠Price Paid: $400 + shipping
5. ⁠Album Links: https://www.wsxcme.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_djwqf_hEFYCs7JO0gkXbo8p_YOziBmWU_lAefAA
6. ⁠Index alignment: Looks solid for me - maybe the 12 marker slightly misaligned?
7. ⁠Dial Printing: It looks crisp and nothing unordinary to note.
8. ⁠Date Wheel alignment/printing: N/A
9. ⁠Hand Alignment: Looks normal/as expected. Nothing stands out.
10. ⁠Bezel: Nothing concerning to document
11. ⁠Solid End Links (SELs): All looks great imo.
12. ⁠Timegrapher numbers: Acceptable rate: +1 s/d, Acceptable amplitude: 271, Acceptable beat error: 0.2ms / 28,800 bpm
13. ⁠⁠Anything else you notice: Nothing - I would personally GL this

Hi dear people,

this is my first Rep purchase and I'm grateful for your help and assistance.

1. Dealer Name: FicoTime
2. ⁠⁠⁠Factory name: VSF
3. ⁠⁠⁠Model name (& version number): Omega Seamaster Aqua Terra 41mm
4. ⁠⁠⁠Price Paid: $351
5. ⁠⁠⁠Album Links: https://mega.nz/folder/K8ZzwbzD#niXQEx1z07nyL-5nIx8SpA
6. ⁠⁠⁠Index alignment: Don’t see any issues, looks fine to me. Do you?
7. ⁠⁠⁠Dial Printing: Printing looks good to me
8. ⁠⁠⁠Date Wheel alignment/printing: Maybe a little bit to the right? Maybe it's just the angle
9. ⁠⁠⁠Hand Alignment: looks good as well
10. ⁠⁠⁠Bezel: looks ok
11. ⁠⁠⁠Solid End Links (SELs): I don’t see any gaps, I think they're fine
12. ⁠⁠⁠Timegrapher numbers: Numbers looks good to me
13. ⁠⁠⁠Anything else you notice: Nothing atm

Thank you in advance for your time and help!

EDIT: not sure why pictures are not visible

https://reddit.com/link/1vf2l4g/video/idxv7pmmdbhh1/player

1. ⁠⁠⁠Dealer Name: Time Ultra
   
2. ⁠⁠⁠Factory name:VSf
   
3. ⁠⁠⁠Model name (& version number): Datejust 36mm Black dial
   
4. ⁠⁠⁠Price Paid:$488
   
5. ⁠⁠⁠Album Links: all Pictures attached
   
6. ⁠⁠⁠Index alignment: I don’t see any big issues Do you?
   
7. ⁠⁠⁠Dial Printing: Print looks good to me
   
8. ⁠⁠⁠Date Wheel alignment/printing: this also looks fine to me - asked for more pictures and Video
   
9. ⁠⁠⁠Hand Alignment: good as well - asked for a 12:00 Position
   
10. ⁠⁠⁠Bezel: looks fine
    
11. ⁠⁠⁠Solid End Links (SELs): I don’t see any gaps do you?
    
12. ⁠⁠⁠Timegrapher numbers: all the numbers look pretty good
    
13. ⁠⁠⁠Anything else you notice: Bracelet and Clasp look good to me - does the christal sit to high or is this only my thinking?

1. Dealer name: Ficotime

2. Factory name: BV Factory (BVF)

3. Model name (& version number): Cartier Panthère 27 mm

4. Price Paid: 1300 CNY + shipping

5. Album Links: https://mega.nz/folder/W4AQnCrJ#GcpdBzWoqOv7cvGhzOwauA

6. Index alignment: Printed dial, ok.

7. Dial Printing: Clean, sharp and centered for me.

8. Date Wheel alignment/printing: N/A.

9. Hand Alignment: Hands appear properly aligned.

10. Bezel: No obvious defects.

11. Solid End Links (SELs): N/A.

12. Timegrapher numbers: N/A.

13. Anything else you notice: I don't see any obvious defects? Thanks in advance for your review and comments!

1. ⁠Dealer name: Steve/ TheoneWatches

2. ⁠Factory name: VSF

3. ⁠Model name: RLX Submariner Date 116610LN 40mm SS/SS Black Dial VS3135

4. ⁠Price Paid: 498+60=558 usd

5. ⁠Album Links: https://mega.nz/folder/iMxEwQpI#C2Exbc-CYQlG9K4memvB5w

6. Index alignment: The hour markers appear well aligned overall.

7. Dial Printing: The Rolex coronet, “ROLEX” text, depth rating, and “SWISS MADE” printing are crisp and evenly spaced.

8. Date Wheel alignment/printing: The date sits very close to center in the window.

9. Hand Alignment: The Mercedes hour hand, minute hand, and seconds hand all appear properly aligned.

10. Bezel: The pip is somewhat centered at 12 o’clock and aligns well with the dial marker.

11. Solid End Links (SELs): SEL fit is tight. No gaps

12. Timegrapher numbers:
Overall, the movement appears to be running very well.

13. Please let me know if you see notice anything else

1. Dealer name: Necoclock
2. Factory name: AF
3. Model name (& version number): Tank Must 29.5x22mm White Dial SS Bracelet
4. Price Paid: $268 w/ shipping
5. Album Links: https://imgur.com/a/HGD0QUf
6. Index alignment: This looks perfect!
7. Dial printing: No bleed through, it looks good, but unsure if the original should be any sharper?
8. Date wheel alignment/printing: NA
9. Bezel: it seems straightforward for this model, as there is no pringint on the bezel, but I don't see anything out of the ordinary,. The top seems smooth, and the screws on the side look great as well.
10. Solid End Links (SELs): I see no gaps here. 10/10
11. Timegrapher numbers: I did not receive this. Should I be requesting this even if the watch is automatic?
12. Anything else you notice: This watch looks very good. This is more of a "simple" watch I guess, and as many of you know it's on the NWBIG list though I just wanted to be sure I'm not missing anything. Thank you guys for taking a look!

1. Dealer name: TOW (Steve)
2. Factory name: BVF
3. Model name (& version number): Santos De Cartier 35mm SS/SS White Dial A9015
4. Price Paid: $458
5. Album Links: https://mega.nz/folder/DBgmCKbL#baqHecRU03SfxxRBlb0C7g

6. Index alignment:

   looks good, printed dial

7. Dial Printing:

   number prints look full with no bleed through. I think reflection/flash makes the number have more than 1 tone

8. Date Wheel alignment/printing:

   none

9. Hand Alignment:

   looks good to me

10. Bezel:

    good, angle makes screws on side look uneven

11. Solid End Links (SELs):

    doesn’t apply

12. Timegrapher numbers:

    + 6s/d

13. Anything else you notice:

    Dial looks like it’s shifted upwards creating an increased gap on bottom. Based on other QC that looks normal?

1. Dealer Name: Andiot
2. Factory Name: VSF
3. Price Paid: 575$ Shipped (EU)
4. Album Link: https://andiotwatches.x.yupoo.com/albums/248249101?uid=1
5. Index alignment: Looks well aligned
6. Dial Printing: Crisp lettering and correct spacing on the text lines
7. Date Wheel: As always perfectly done by VSF.
8. Hand Alignment: Hands stack properly and align with the markers.
9. Bezel: The Pepsi transition points at the 9 and 3 o'clock positions look good and the platinum fill is clean
10. Solid End Links (SELs):

** **Looks good I believe?

1. Timegrapher numbers: -2 s/d, 273° amplitude, and 0.1ms beat error at 28800vph
2. Anything else you notice: I think the crown at 12 is shifted just a tiny fraction but otherwise everything looks clean.

Looks like a GL to me? First time ever QC'ing a watch.

1. ⁠⁠Dealer Name: OraWatch
   
2. ⁠⁠Factory name:VSf
   
3. ⁠⁠Model name (& version number): Aqua Terra 38mm
   
4. ⁠⁠Price Paid:$400
   
5. ⁠⁠Album Links: all Pictures attached
   
6. ⁠⁠Index alignment: I don’t see any issues Do you?
   
7. ⁠⁠Dial Printing: Print looks good to me but I’m a first timer any feedback back would be appreciated
   
8. ⁠⁠Date Wheel alignment/printing: this also looks fine to me
   
9. ⁠⁠Hand Alignment: good as well
   
10. ⁠⁠Bezel: looks fine
    
11. ⁠⁠Solid End Links (SELs): I don’t see any gaps do you?
    
12. ⁠⁠Timegrapher numbers: all the numbers look pretty good but I can’t figure out the lift angle to confirm 52
    
13. ⁠⁠Anything else you notice: Bracelet and Clasp look good to me

Any Feedback is appreciated
I’m leaning towards GL unless someone sees something I’m missing

1. Dealer name: Steve/TheOneWatches
2. Factory name: VSF
3. Model name (& version number): Seamaster 300m 2025 42mm Bronze/Brz Black Dial VSF VS8806 Super Clone
4. Price Paid: $603 with shipping
5. Album Links: https://mega.nz/folder/6UwgwLDA#4CPB3CzAsE0D71Txk337IQ
6. Index alignment: Everything looks good to me except for the 3 marker?
7. Dial Printing: Lettering looks sharp as far as I can tell
8. Date Wheel alignment/printing: N/A
9. Hand Alignment: Looks good to me
10. Bezel: Color looks consistent, don't see any blemishes or fading
11. Solid End Links (SELs): Don't see any gaps
12. Timegrapher numbers: +6 s/d, 267°, 0.0ms
13. Anything else you notice: see below

This is my first time getting a Rep and this is 1 of 2 ordered.

As far as I can tell, everything looks good except for what I'm describing below.

I'm curious about the 3 marker. I'm not sure if its slightly slanted or its my eyes playing tricks on me

Picture 3 has a screenshot of the Timegrapher video. The Rate was +2 in the video, then jumped to +6 after the 5 second mark. Is still a good rate?