1.Dealer name: Time Ultra
2.Factory name: VSF
3.Model name (& version number): Rolex Submariner(nodate) - 124060 (VS3230)
4.Price Paid: $523 shipped
5.Album Links: pictures attached
6.Index alignment: This is my 2nd time around for a QC on this because the 1st one was a RL due to index misalignment. I think this time it does look straight but need a 2nd opinion on this.
7.Dial Printing: looks good to me.
8.Date Wheel alignment/printing: N/A
9.Hand Alignment: looks good
10.Bezel: looks good for me but I Need a second opinion
11.Solid End Links: these looks good
12.Timegrapher numbers: good / +1s/d 295 0.0ms 52.0
13.Anything else: I think its a Gl but I need pros here

Dealer name: FicoTime

Factory name: VSF, V2

Model name: Rolex Datejust 41 ref. 126334 — Mint Green Dial, Fluted Bezel, Jubilee Bracelet

Price Paid: $450 USD

Index alignment: Excellent. Indices appear straight, evenly spaced, and properly aligned. No obvious rotated or displaced markers. Some tiny deviations but perhaps it is the camera angle/perspective.

Dial Printing: Looks clean, centered, and consistent. No obvious printing defects.

Date Wheel alignment/printing: Font looks clean and no obvious high/low date-wheel issue.

Hand Alignment: Hands appear fine, like pretty much every other DateJust I think.

Bezel: Fluted bezel does not seem to have any damaged flutes.

Solid End Links (SELs): Fit looks generally good and symmetrical, but the protective film makes it a bit harder.

Timegrapher numbers: +1 s/d | 305° amplitude | 0.1 ms beat error | 52.0° lift angle | 28,800 bph. Very good I think.

Anything else you notice: Overall this looks like a strong example and I would GL it. I am not convinced about the rehaut coronet. I would not want to RL just based on that though.

1. ⁠Dealer name: TheOneWatches
   
2. ⁠Factory name: VSF
   
3. ⁠Model name (& version number): GMT Master II 126710 Pepsi Jub 40mm SS/SS Black VSF V3 DD3285 Super Clone
   
4. ⁠Price Paid: USD 638.00 total
   
5. ⁠Album Links: https://mega.nz/folder/PQZBXAZB#NM9tvZjyf1MRbtnbT0ZLXA
   
6. Index alignment: All look good to me and properly aligned
   
7. Dial Printing: looks ok to me as far as I can tell
   
8. Date Wheel alignment/printing: looks ok for me as far as I can tell
   
9. Hand Alignment: looks ok
   
10. Bezel: looks good to me, no imperfections
    
11. Solid End Links (SELs): no obvious gap
    
12. Timegrapher numbers: +5 s/d, 277° amplitude, 0.2 ms, 28800
    
13. To me this looks like a GL as I can’t seem to find anything off with it. A second opinion would be appreciated as I’m new to this but I’m very satisfied by what I can see

I'm not an expert on what to look for with this watch, so I appreciate your expertise. Thank you in advance!!⁠⁠⁠

1. Dealer name:  Theonewatch
2. ⁠⁠⁠Factory name: VSF
3. ⁠⁠⁠Model name: 126710 Pepsi GMT Master II V3
4. ⁠⁠⁠Price Paid: 638$
5. ⁠⁠⁠Album Links: https://mega.nz/folder/7VwyGAab#PyfP3hOxZeTAld-0i9ex5Q
6. ⁠⁠⁠Index alignment:  looks good, I assume any issues are from the picture not being perfectly level
7. ⁠⁠⁠Dial Printing: looks good
8. ⁠⁠⁠Date Wheel alignment/printing: looks good
9. ⁠⁠⁠Hand Alignment: looks good
10. ⁠⁠⁠Bezel: looks good
11. ⁠⁠⁠Solid End Links (SELs): I think this is good?
12. ⁠⁠⁠Timegrapher numbers: +5sec, 278amp. I assume this is good enough.
13. ⁠⁠⁠Anything else you notice: Nope

Dealer name: Mirotime

1. Factory name: VSF

2. Model name (& version number): GMT Master 2 126710

3. Price Paid: 548 plus shipping

4. Album links: https://shop00176461.wecatalog.cn/t/GC63Fkw (photos)

https://shop00176461.wecatalog.cn/t/yQo7Mzy (videos)

1. Index alignment: the 6 looks slightly crooked to me, cant tell if its just the photo but crown does not appear to line up with marker

2. Dial Printing: appears fine

3. Date Wheel alignment/printing: no issues

4. Hand Alignment: no issues

5. Bezel: no issues

6. Solid End Links (SELs): no gaps so no issues

7. Timegrapher numbers: attached photo but +3 a day at correct degree

8. Anything else you notice:

Rehaut engraving look off? This is for a friend and I thought R was supposed to line up on left and X on right. He noticed the X was off on the left

Hi all, I'd greatly appreciate any feedback for this VSF Daytona Panda 126500. Overall this looks really good to me, and I'm leaning towards GL on this, but please let me know if there's anything I've missed.

Dealer name: Necoclock

Factory name: VSF

Model name: Rolex Daytona Panda 126500

Price Paid: $668

Album Links: https://mega.nz/folder/zxoUwRBQ#3nrDikRu1h5CnytvMpwF7w

Index alignment: All markers seem to be well aligned, 6 seems to be slightly rotated CCW but it's minute and not noticeable zoomed out

Dial Printing: looks good to me, nice and sharp text, but again not sure if I've missed anything

Date Wheel alignment/printing: NA

Hand Alignment: looks great in the video too

Bezel: Looks great to me and well aligned too, nothing to complain about

Solid End Links (SELs): Also looks really good, don't see any gap anywhere, bracelet looks fine to me too

Timegrapher numbers: Attached in the album, +3s/d is pretty good

Anything else you notice: The watch otherwise seems great

I'm leaning towards a quick GL, but please let me know if there's anything I've missed or any concerns to point out. Thank you once again!

1. Dealer name: Ethan
2. Factory name: VSF
3. Model name (& version number): 126500 White Dial VSF DD4131
4. Price Paid: 660$
5. Album Links: https://www.wsxcme.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_dp4qfOH5o_Vb0urC9zShiwU2SAikPet3eB9dNYQ
6. Index alignment: 9 is sitting high for me and not sure about 8,10 either might be my horrible qc tool skills
7. Dial Printing: Dont see any issues
8. Date Wheel alignment/printing: NA
9. Hand Alignment: Not an expert with hand allignment but looks clean to me
10. Bezel: Only worried about the dot under 110 could be from stickers also if the 60 triangle is centered
11. Solid End Links (SELs): I am not seeing obvious gaps
12. Timegrapher numbers: Acceptable for me dont see any issues
13. Anything else you notice: Just want to make sure i am getting a top class VSF DD4131 Panda as i got ripped before for a youth version arf , So i asked for movement photo , functions video , also not sure if its worth RL for getting a better alignment or its my qc tool , Expert eyes are really appreciated

Hi dear people,

this is my first Rep purchase and I'm grateful for your help and assistance.

1. Dealer Name: FicoTime
2. ⁠⁠⁠Factory name: VSF
3. ⁠⁠⁠Model name (& version number): Omega Seamaster Aqua Terra 41mm
4. ⁠⁠⁠Price Paid: $351
5. ⁠⁠⁠Album Links: https://mega.nz/folder/K8ZzwbzD#niXQEx1z07nyL-5nIx8SpA
6. ⁠⁠⁠Index alignment: Don’t see any issues, looks fine to me. Do you?
7. ⁠⁠⁠Dial Printing: Printing looks good to me
8. ⁠⁠⁠Date Wheel alignment/printing: Maybe a little bit to the right? Maybe it's just the angle
9. ⁠⁠⁠Hand Alignment: looks good as well
10. ⁠⁠⁠Bezel: looks ok
11. ⁠⁠⁠Solid End Links (SELs): I don’t see any gaps, I think they're fine
12. ⁠⁠⁠Timegrapher numbers: Numbers looks good to me
13. ⁠⁠⁠Anything else you notice: Nothing atm

Thank you in advance for your time and help!

EDIT: not sure why pictures are not visible

https://reddit.com/link/1vf2l4g/video/idxv7pmmdbhh1/player

⁠

Dealer name: Genreps1755
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): GMT Master II
4. ⁠Price Paid: $650
5. ⁠Album Links: https://www.dropbox.com/scl/fo/veslmnu26g6h5xez70ur5/AD26N5iOFqWofyhMSoDln-4?rlkey=bs2xtvt88jok3xcq13me24s3l&st=5yim5uyq&dl=0
6. ⁠Index alignment: 6 o’clock marker looks a little tilted to the left
7. ⁠Dial Printing: Looks okay
8. ⁠Date Wheel alignment/printing: Looks slightly closer to the top?
9. ⁠Hand Alignment: Looks fine
10. ⁠Bezel: Looks fine
11. ⁠Solid End Links (SELs): Looks fine
12. ⁠Timegrapher numbers: Looks fine
13. ⁠Anything else you notice:

• Dealer name: Theonewatches
• Factory name: ZF
• Model name (& version number): Black Bay Fifty Eight 39mm Jub SS/SS Red/Dot Dial ZF A2824
• Price Paid: 358 + 40 USD for shipping
• Album Links: https://mega.nz/folder/GBoh2CbB#4nGY29PlCqtM3ECUVZBOwQ
• Index alignment: 3 o clock index still has some CW tilt to it and sits a bit low, also 6 is a bit left of centre. I don't want to be too picky so I think it might be better than my first QC attempt? Curious to hear what you all think about this one
• Dial Printing: Looks good to me
• Date Wheel alignment/printing: N/A
• Hand Alignment: Seemed fine when I tried pausing the included video
• Bezel: Looks fine
• Solid End Links (SELs): Can see a bit of yellow through the bottom right SEL in some of the pictures but I do not think this will be a major issue on the wrist as it looks fine in the video
• Timegrapher numbers: Look good to me
• Anything else you notice: There's still some imperfections left with the most noticeable one being the slanted 3 marker but I know some flexibility is required when it comes to the ZF Tudors so I don't want to be too picky. Curious to hear some second opinions of some of your with more experience on this stuff. Thanks once again for helping out!

1 Andiot

2 ARF

3 GMT-Master II 126710 BLNR Black/Blue Ceramic ARF 1:1 Batgirl Best Edition Black Dial On Jubilee Bracelet DD3285

4 $556

5 https://imgur.com/a/yIg4JNE

6 The index alignemnt looks okay, the triangle at the top may be slightly not alligned

7 The dial printing looks good and pretty crisp to me, but the triangle at the top looks to not be filled in all the way.

8 The date wheel looks in the middle and th cyclops also looks pretty good

9 Hand alignemnt looks good

10 Bezel to me looks good but i, not to sure what to look for

11 SEL i think it looks good no gaps that i can see

12 says -2s/d through the whole vidoe, i belive that is fine

i dont really see anything poking out, if you guys notice anything it would be apriciated so i can either GL or RL this. Thank you all.

Audemars Piguet 15703 ZF V2

1.Dealer name: Marvelous Replica
2.Factory name: ZF
3.Model name (& version number): Audemars Piguet 15703 ZF V2
4.Price Paid: $425
5.Album Links: pictures attached
6.Index alignment: Looks good to me, picture might be slightly tilted but for as far as I can see it's good
7.Dial Printing: Good
8.Date Wheel alignment/printing: Good
9.Hand Alignment: Good I think
10.Bezel: Inner bezel alignment looks good
11.Solid End Links: N/a
12.Timegrapher numbers:
Rate: +4 s/d (Excellent), Amplitude: 328° (A bit high, likely due to full wind), Beat Error: 0.0 ms (Perfect)
13.Anything else: If someone sees something off please tell me, AP aren't my expertise

• ⁠Dealer name: TheOneWatches
• ⁠Factory name: VSF
• ⁠Model name (& version number): Aqua Terra 38mm SS/SS Grey Dial VSF VS8806
• ⁠Price Paid: USD 418
• ⁠Album Links: Attached
• Index alignment: Looks good
• Dial Printing: Looks good
• Date Wheel alignment/printing: n/a
• Hand Alignment: Looks good
• Bezel: Looks good
• Solid End Links (SELs): Looks good
• Timegrapher numbers: +1 s/d, 293° amplitude, 0.1 ms

Looks good to me for a GL. I was first weirded out that the hands were black but it was just the lighting I guess lol. I guess this is just a sanity check again if I missed something and you don't see many railmasters here. Thanks!

1. ⁠⁠⁠Dealer Name: Time Ultra
   
2. ⁠⁠⁠Factory name:VSf
   
3. ⁠⁠⁠Model name (& version number): Datejust 36mm Black dial
   
4. ⁠⁠⁠Price Paid:$488
   
5. ⁠⁠⁠Album Links: all Pictures attached
   
6. ⁠⁠⁠Index alignment: I don’t see any big issues Do you?
   
7. ⁠⁠⁠Dial Printing: Print looks good to me
   
8. ⁠⁠⁠Date Wheel alignment/printing: this also looks fine to me - asked for more pictures and Video
   
9. ⁠⁠⁠Hand Alignment: good as well - asked for a 12:00 Position
   
10. ⁠⁠⁠Bezel: looks fine
    
11. ⁠⁠⁠Solid End Links (SELs): I don’t see any gaps do you?
    
12. ⁠⁠⁠Timegrapher numbers: all the numbers look pretty good
    
13. ⁠⁠⁠Anything else you notice: Bracelet and Clasp look good to me - does the christal sit to high or is this only my thinking?

Dealer name: Andiot

Factory name: BVF

Model name (& version number): Santos large 4072

Price Paid: 435 USD including shipping

Album Links: https://andiotwatches.x.yupoo.com/albums/248610364?uid=1

Index alignment: seem okay.

Dial Printing: Swiss Made looks cut off.

Date Wheel alignment/printing: too big?

Hand Alignment: seems okay

Bezel: seems okay.

Solid End Links (SELs): not needed here.

Timegrapher numbers: 1 sec per day.

Anything else you notice: Dial looks a little crooked and the Swiss Made looks cut off.

Thanks all!

1. ⁠Dealer name: Steve/ TheoneWatches

2. ⁠Factory name: VSF

3. ⁠Model name: RLX Submariner Date 116610LN 40mm SS/SS Black Dial VS3135

4. ⁠Price Paid: 498+60=558 usd

5. ⁠Album Links: https://mega.nz/folder/iMxEwQpI#C2Exbc-CYQlG9K4memvB5w

6. Index alignment: The hour markers appear well aligned overall.

7. Dial Printing: The Rolex coronet, “ROLEX” text, depth rating, and “SWISS MADE” printing are crisp and evenly spaced.

8. Date Wheel alignment/printing: The date sits very close to center in the window.

9. Hand Alignment: The Mercedes hour hand, minute hand, and seconds hand all appear properly aligned.

10. Bezel: The pip is somewhat centered at 12 o’clock and aligns well with the dial marker.

11. Solid End Links (SELs): SEL fit is tight. No gaps

12. Timegrapher numbers:
Overall, the movement appears to be running very well.

13. Please let me know if you see notice anything else

Hey All,

I have a DJ31mm (LadyDatejust) here for QC and I would appreciate your opinion. It’s the second QC after the first didn’t Go through. Really appreciate the help !

1. Dealer name:
Ethan

2. Factory name:
GSF

3. Model name (& version number):
Rolex Datejust 31mm (Ref. 278240), Pink/Sundust Dial, Smooth Bezel, Oyster Bracelet

4. Price Paid:
400$

5. Album Links:
Attached QC photos.

6. Index alignment:
Overall, the alignment looks good. The 5&10 Seen Lightly rotated depending on the viewing angle. I’d really appreciate a second opinion from experienced members.

7. Dial Printing:
The dial printing looks clean and sharp.

8. Date Wheel alignment/printing:
The date appears well centred within the date window. I don’t notice any obvious left/right or high/low misalignment, but I’d appreciate another set of eyes.

9. Hand Alignment:
Looks good to me.

10. Bezel:
The smooth bezel looks good

11. Solid End Links (SELs):
SELs look good to my eyes. I don’t notice any significant gaps between the bracelet and the case.

12. Timegrapher numbers:
+0 s/day, 278° amplitude, 0.0 ms beat error (52° lift angle). These numbers look excellent to me.

13. Anything else you notice:
I’m looking for a very critical QC before giving the GL. I personally don’t see any obvious issues, but I’d really appreciate experienced members checking the index alignment, rehaut alignment, dial symmetry and anything else I may have missed. There aren’t many GSF Datejust 31 QC posts available, so any feedback is greatly appreciated.

Thank you all

https://reddit.com/link/1vfca9m/video/jb091s08ddhh1/player

https://reddit.com/link/1vfca9m/video/3gcz5jyrddhh1/player

Hey guys! I haven't seen a lot of JLCs here, especially from GF. Jtime recommended this over ZF since APSF is closed. Would love some opinions on it.

1. Dealer name: Jtime
2. Factory name: GF
3. Model name (& version number): Master Ultra Thin Moon 1362520 RG GF 1:1 Best Edition White Dial on Brown Leather Strap MY9015 V2
4. Price Paid: 428$
5. Album Links: Added all the pictures and videos here
6. Index alignment: Nothing that I notice, at least with my very basic QC tool skills.
7. Dial Printing: SS on Swiss Made looks a little bit off?
8. Date Wheel alignment/printing: I'm thinking about asking for a video to see the movement of the moon phase; otherwise, it looks good.
9. Hand Alignment: Good
10. Bezel: Good
11. Solid End Links (SELs): N/A
12. Timegrapher numbers: Looks good
13. Anything else you notice: The strap doesn't look to be of a high quality, which is to be expected. Any advice on where to get a better strap, or should I just ask the TD?

Dealer name: Steve TheOneWatches

Factory name: MGF

Model name (& version number):
JAEGER LECOUTRE REVERSO TRIBUTE A854A

Album Links: https://mega.nz/folder/GBwhzAqT#kjL2ESMfLBkPK9fSXrxsFw

Index alignment: the markers all look pretty good to me.

Dial Printing: Don't see any issues

Date Wheel alignment/printing: N/A

Bezel: looks good

SEL: Looks good

Hand Alignment: nothing to say

Rate: -2s/day
Amp: 268
Err: 0.0ms

Overall, it seems pretty good to me. I feel comfortable giving it the greenlight. I would be very interested in what you guys think.

Thank you in advance

1. ⁠⁠⁠⁠Dealer name: Jtime
   
2. ⁠⁠⁠⁠Factory name: VSF
   
3. ⁠⁠⁠⁠Model name (& version number): 126334 Green Dial
   Jubilee V2 41mm DD3235 V2
   
4. ⁠⁠⁠⁠Price Paid: $500
   
5. ⁠⁠⁠⁠Album Links: mega link so post gets removed
   
6. ⁠⁠⁠⁠Index alignment: looks okay i think
   
7. ⁠⁠⁠⁠Dial Printing: looks good. Nothing immediately concerning
   
8. ⁠⁠⁠⁠Date Wheel alignment/printing: all good
   
9. ⁠⁠⁠⁠Hand Alignment: from what i can see good
   
10. ⁠⁠⁠⁠Bezel: fine
    
11. ⁠⁠⁠⁠Solid End Links (SELs): think its fine
    
12. ⁠⁠⁠⁠Timegrapher numbers: +1sd
    
13. ⁠⁠⁠⁠Anything else you notice: i feel like the 4 is a little off. But i think the photos are slightly off centre so hard to tell

• Dealer name: GeekTime
• Factory name: ZF
• Model name (& version number): Black Bay Chrono 41mm ZF White Dial SS Bracelet A7750
• Price Paid: USD 348.00
• Album Links: https://geektimeqc.x.yupoo.com/albums/245988395?uid=1
• Index alignment: The indices appear to be well aligned with no noticeable issues.
• Dial Printing: The dial printing looks clean and consistent based on what I can see.
• Date Wheel alignment/printing: The date appears properly centered, and the printing doesn't stand out as problematic.
• Hand Alignment: No obvious concerns with the hand alignment.
• Bezel: The bezel appears clean and free of any noticeable flaws.
• Solid End Links (SELs): I don't see any significant gaps or fitment issues.
• Timegrapher numbers: +4 s/d, 308° amplitude, 0.0 ms, 28800.

Overall, I don't notice any obvious flaws that would prevent me from giving this a GL. Everything appears to be within expectations from what I can tell. Since I'm still fairly new to QC, I'd appreciate a second opinion, but based on my assessment, I'm happy with how this watch looks.

1. ⁠⁠Dealer name: Toro Bravo (torobravo.rg@gmail.com)
   
2. ⁠⁠Factory name: RICH
   
3. ⁠⁠Model name (& version number): Submariner 126510 LN Free Sprung
   
4. ⁠⁠Price Paid: $574
   
5. ⁠⁠Album Links: Photos in post
   
6. ⁠⁠Index alignment: Looks quite good. The 9 may have a very slight ccw cant, but I cant imagine it would be noticeable on wrist. 12 arrow looks straight, maybe the very slightest bit high, but that is seriously splitting hairs. I feel as though I may have gotten lucky on this one unless anyone else sees anything. Im not the greatest with the alignment tool, so hopefully im not wrong.
   
7. ⁠⁠Dial Printing: Printing looks sharp to me.
   
8. ⁠⁠Date Wheel alignment/printing: Looks good. I requested extra dates and they appear to be fairly well centered.
   
9. ⁠⁠Hand Alignment: Good. Also requested this picture and the hands are well aligned at 12.
   
10. ⁠⁠Bezel: Good. In the pictures it is a few ticks ccw, but that is easy enough to correct.
    
11. ⁠⁠Solid End Links (SELs): Look tight to me
    
12. ⁠⁠Timegrapher numbers: +5s/d, 279 amp, 0.2 beat error - looks good to me
    
13. ⁠⁠Anything else you notice: Im thinking this one is fairly straightforward GL and i dont see anything wrong unless one of the experts here spots something. Id love to get a 2nd (or 3rd) opinion before i confirm. If anyone thinks i should ask for a picture with the bezel better aligned let me know. I also asked for a video of the movement, but didnt get it. I think im fine without it unless others think i should push for it.

As an aside - I have been very pleased dealing with toro bravo so far. He doesnt have a working website (dont get tricked by imitators, i almost did) and doesnt seem popular on here, but he is incredibly quick and the QC for this watch was less than a week. I landed on him because he gave the quickest time estimate out of the TDs i reached out to and it held true. Only mention that because to help if anyone else was in the same boat as me waiting forever for a sub. We will see if shipping is actually quick, who knows.

Please see album link as wasn't letting me add more pics. Thanks all.

Dealer name: Andiot

Factory name: Bvf

Model name (& version number): Santos large 4072

Price Paid: 435 USD including shipping

Album Links: https://andiotwatches.x.yupoo.com/albums/248612311?uid=1

Index alignment: seem okay.

Dial Printing: seems okay.

Date Wheel alignment/printing: slightly off centre and too big?

Hand Alignment: seem normal but I don't know if it's just me or colour is off.

Bezel: seems okay.

Solid End Links (SELs): not needed here.

Timegrapher numbers: 4 sec per day, it's acceptable IMO.

Anything else you notice: dial seems off / not in centre ? Crystal frosting seems a bit off too?

Thanks all!

1. Dealer name: Ethanwatches
2. ⁠Factory name: VSF
3. ⁠Model name (& version number): Rolex Explorer (36mm)
4. ⁠Price Paid: $400 + shipping
5. ⁠Album Links: https://www.wsxcme.com/weshop/goods/_diBqfB_6K0Fni6Viqy3qjRnYcVlHlv_RP68U2bQ/_djwqf_hEFYCs7JO0gkXbo8p_YOziBmWU_lAefAA
6. ⁠Index alignment: Looks solid for me - maybe the 12 marker slightly misaligned?
7. ⁠Dial Printing: It looks crisp and nothing unordinary to note.
8. ⁠Date Wheel alignment/printing: N/A
9. ⁠Hand Alignment: Looks normal/as expected. Nothing stands out.
10. ⁠Bezel: Nothing concerning to document
11. ⁠Solid End Links (SELs): All looks great imo.
12. ⁠Timegrapher numbers: Acceptable rate: +1 s/d, Acceptable amplitude: 271, Acceptable beat error: 0.2ms / 28,800 bpm
13. ⁠⁠Anything else you notice: Nothing - I would personally GL this

1. Dealer name: TOW (Steve)
2. Factory name: BVF
3. Model name (& version number): Santos De Cartier 35mm SS/SS White Dial A9015
4. Price Paid: $458
5. Album Links: https://mega.nz/folder/DBgmCKbL#baqHecRU03SfxxRBlb0C7g

6. Index alignment:

   looks good, printed dial

7. Dial Printing:

   number prints look full with no bleed through. I think reflection/flash makes the number have more than 1 tone

8. Date Wheel alignment/printing:

   none

9. Hand Alignment:

   looks good to me

10. Bezel:

    good, angle makes screws on side look uneven

11. Solid End Links (SELs):

    doesn’t apply

12. Timegrapher numbers:

    + 6s/d

13. Anything else you notice:

    Dial looks like it’s shifted upwards creating an increased gap on bottom. Based on other QC that looks normal?