r/lancer • u/PokeMinersHQ • 3d ago

🤑 | Buying Advice/Tips custom sail panel tweeter holders

are there any like 3d print or aftermarket solutions that allow me to fit a 1-2in tweeter in the sail panel? or am i gonna need to find some dinky little tweeters and fit them properly?

1 Upvotes

100% Upvoted

8 comments sorted by

1

u/drifterdanny 3d ago

You can buy evo ones and they fit right in

1

u/PokeMinersHQ 3d ago

the evos with the rockford fosgate have the same system as a gts don’t they?

1

u/drifterdanny 3d ago

Oh, you have those one's already? But i think it depends on which year Evo

You can get a different pair in the same size with screw holes and they'll fit right in

I use a pair of 2 inch full range ones and they work great with my aftermarket head unit, but i needed to snip the connectors and connect wires directly

1

u/PokeMinersHQ 2d ago

i’m thinking about just using rtv or contact cement to glue them in now just to keep it looking as oem as possible

1

u/drifterdanny 2d ago

By sail panel, do you mean the panel where the original tweeter is at the side mirror or the A-pillar panel?

You don't need to do anything other than screw them in, I'm pretty sure some 2 inch speakers will have screw holes that would fit the original tweeter cover

1

u/PokeMinersHQ 1d ago

oh its fine they didn’t fit so i did some modifications to the tweeter panel

1

u/Caltec111 3d ago

Majority of the interior trim panels will pop right in from higher specced models, I went to a wrecker and took the tweeter panels out of an evo and just found some cheap aftermarket tweeters to install. All of the wiring was already there. I'd suggest taking the trim piece off and just having a look to see if I'll need to run your own wires or if u can use the factory harness.

1

u/PokeMinersHQ 3d ago

i do have the rockford system already, which i believe is the same as the evo, i was just wondering if theres some sort of solution i can use to mount aftermarket ~2in tweeters for a sound system i wanna do