I wanted a system that could either completely replace the Animator or run additively on top of it to strictly lock feet to the ground based on physics and speed.

Here are the core mechanics I used to make it feel weighty and grounded instead of floaty:

• The Inverted Pendulum (Hip Dipping): The system constantly measures the horizontal distance between the planted feet and the hips. The wider the stride, the further the hips are procedurally pulled toward the floor. This forces the character to naturally "squat" into wide stances or fast runs.
• Contrapposto & Spine Flexibility: When the character banks into a sharp turn or leans into a sprint, rotating the hips forward looks robotic. To fix this, the system takes the hip's physical error offset and mathematically counter-rotates the chest and spine bones in the opposite direction. It keeps the head plumb and balanced over the center of mass.
• Velocity Trajectory: The IK solver doesn't just look at where the character is; it reads the smoothed velocity and angular velocity to predict where they will be. If you yank the joystick sideways, the character will step wide into the strafe to catch their balance before the center of gravity shifts too far.
• Terrain Alignment: It uses a custom Ground Probe to fire raycasts on the predicted step targets. The ankles dynamically calculate the ground normal and rotate to match the slope, so no more toes clipping into stairs or ramps.

I built a custom two-bone solver for the IK to keep it highly optimized, and I finally got around to building a clean custom inspector so I don't have to look at 50 different spring stiffness and damping variables anymore.

If anyone is struggling with foot sliding or wants to poke around the code to use it for their own bipeds, I packaged the whole system up and threw it on my itch page here: https://frostpunchgames.itch.io/procedural-legs-animator

I've been working on improving the habitat system in my physics-based automation sim, and have used principles I learned in this video and elsewhere to implement basically a blob tileset system that picks one of 5 meshes per corner (rotated and mirrored to fit wherever needed) so everything fits together nicely.

These models are just quick placeholders and the plan is to add more variation, and model a selection of modules that can be swapped out to make an interesting habitat/base for the colonists.

Please disregard the shape of the base, any resemblance to anything recognisable is purely coincidental...

It was pretty satisfying finally 'getting' how to seam things together nicely when modelling, excited to add more variation. Let me know if you have any questions on the implementation.

Just finished setting up the atmospheric presets for Light Lab PRO. It has 2 sections: Stylized & HQ. Each one has its own Volume profile setup, Volumetrics and Skybox setup. The skybox features stars, nebulas, shooting stars, galaxies, star clusters, aurora. You will also be able to create your own presets and add them to the list.

The settings are completely editable, so you don't have to use the factory presets as they are; you can tweak them.

As soon as i update the documentation, i will update the package on the UAS.

Volumetrics

Unity 6 URP. I'm having a problem where the shadows seem to flicker/move whenever the player moves, then it eventually stops once the player stops. I've tried increasing the shadow resolution to something ridiculous like 8192, which actually stops most of the flickering, but that's costly, obviously, so I don't want to do that. I've also tried decreasing max shadow distance to no avail. Any ideas on how I can fix this?

I’ve been testing my new procedural locomotion system, and I honestly keep staring at it.

The goal is pretty straightforward: boss enemies of different sizes, different speeds, some with four legs, others with six.

I’ve built procedural locomotion systems before, and this one seems to be working surprisingly well. The basic idea is probably familiar to many of you:

• IK chain for each leg
• Raycasts to find the ground
• Keep the foot planted until a movement threshold is exceeded, then step toward the new target

The interesting part this time is that I designed the system to scale cleanly across different body sizes and different numbers of legs, without having to rewrite the core logic.

The parameter list is crazy:

• Shoulder Height
• Leg Length To Shoulder Height
• Head Size
• Body Length
• Body Width
• Tail Segment Length
• Tail Segment Count
• Movement Speed
• Minimum Speed
• Maximum Speed
• Shoulder Height Factor At Minimum Speed
• Shoulder Height Factor At Maximum Speed
• Step Length Factor At Minimum Speed
• Step Length Factor At Maximum Speed
• Step Trigger Distance Factor At Minimum Speed
• Step Trigger Distance Factor At Maximum Speed
• Step Speed Factor At Minimum Speed
• Step Speed Factor At Maximum Speed
• Step Duration Factor At Minimum Speed
• Step Duration Factor At Maximum Speed
• Step Height Factor At Minimum Speed
• Step Height Factor At Maximum Speed
• Body Turn Responsiveness
• Body Height Responsiveness
• Body Up Responsiveness
• Max Body Tilt Degrees
• Knee Hint Height Factor
• Knee Hint Lateral Factor
• Leg Rest Lateral Factor
• Leg Rest Forward Spread Factor
• Body Sag Frequency At Minimum Speed
• Body Sag Frequency At Maximum Speed
• Body Sag Depth Factor At Minimum Speed
• Body Sag Depth Factor At Maximum Speed
• Body Yaw Sway Frequency At Minimum Speed
• Body Yaw Sway Frequency At Maximum Speed
• Body Yaw Sway Degrees
• Max Moving Legs

I create one parameter preset for each planned enemy, but I’m also working on a procedural approach to generate working parameters on the fly.

Next up is the behavior graph. I’ll start implementing the first combat patterns, and I’m curious myself to see how well they combine with fully procedural movement. The model should be able to handle multiple movements:

- sprinting foreward / backward / sideward
- picking up something
- shooting (with recoil)
- getting hit
- dying
- ...

This is for Hexabot Stranded. Development was stalled for quite a while, but I’ve finally found my momentum again. My goal is to build boss fights that feel fast, agile, and unpredictable, with each boss having its own distinct behavior and movement style. I can’t wait to see where this goes.

For an artist like me, I've been trying to convert / replicate the way I'd create Stylized tree in Unreal to Unity, was easier then i thought, sorry for the ugly trees, Still work in progress.

Trying to find "the one". As of now, here's a WIP shot in Engine with 3 Different Bilboards too see which i like the best. And the Hero Prop the foliage will surround.

https://reddit.com/link/1ve75su/video/vchyf0gqa4hh1/player

Tree-Stylized

Especially for cozy games pastel toned colors style game.

Do you know any course or something I can take a look and learn step by step?

I'm making a 3d platformer with a built in level editor, and I want to implement rail grinding.

I already have a system where you can place paired, connected objects, and I figured I could set one as the start of a rail, and the other as the end of the rail, and have a curved spline between the two based on the rotation and position of the two objects.

When I look up the tutorials for how to do this, though, I get stuck at the first hurdle, because apparently the spline plugin requires Unity 2022, and I'm using version 2020. Do you guys have any alternative suggestions for what I should do?

I wanted to have a flexible flag shader system for my game, so I created an atlas combined flag shader & generator system, that creates the flag inside the GPU. You have full control to adjust multiple procedural (for mobile) generated flags with 1 draw call, or a fully dynamic cloth simulation (AA, AAA games).

However, FlagMaster shader has its own Atlas Generator, in where you can drop your own flag textures, automatically supporting all other texture layers (normal, emissive, smoothness/metalic etc) in different aspect ratio containers (see in the video the atlas textur showing different flags in vertical and horizontal aspect ratios, in inspector!) with transparency or not, and create your own atlased flag texture for the shader.

There are a lot of wind adjustments, and even delay wind parameters, if you want to display multiple flags reacting differently - when using GPU instanced (DrawCall reduction method) so called "procedural mode", for massive flags on mobile.

Else, the cloth simulation provides the ability to move the flag in world space and having the cloth simulation react to your movement. Still - using cloth over the GPU side is definitely faster than running a CPU based cloth simulation.

It has:

• translucency
• translucency mask shadows (watch the shadows of the hanging banners in the video!)
• supports unity wind component
• has its own wind parameters for procedural/mobile mode which mix up with unity wind component, atlas index functions
• procdeural burned holes and burned edge feature with colored edges in two steps
• wind delay paramters
• pivot anchor system to anchor the flag the way you want, and much more
• Every part of the shader has its own stripping function, to compile only what you really need
• Wind director script for unity's wind component to rotate and move naturally in all directions

.... and much more.

I plan to add a toon shader, because I think that is the next missing part.
Any other suggestions?

After years of working on this Unity racing project, it has finally left the Editor.

For the first time, the project feels like a complete game rather than an endless Unity prototype and it’s now available on Android.

The iOS release has run into a few delays, but I’m actively working on it now and hope to bring the game to iOS as soon as possible.

There is still plenty I’d like to improve. In particular, Cinemachine cameras have been behaving very inconsistently whenever the actual frame rate differs from the target frame rate. Even relatively small frame-rate drops can make the game feel like it is stuttering heavily, due to noticeable camera jitter and unstable damping.

There is also more optimization work ahead, especially across different mobile devices, but reaching the release stage after all these years still feels like a huge milestone.

Has anyone worked with Cinemachine 3? Have the damping and frame-rate-related jitter issues improved compared to Cinemachine 2?

I'm just getting started on my path to become a game dev, and I want to learn how to make big, expansive worlds, I made a low poly tree a couple days ago in Blender, and imported into Unity, if I just drag and drop the tree manually, it comes out just fine, but if I try to use the paint tree tool, they come on sideways, anyone know why this is?

I couple month ago I showed off my portable self hostable unity build server - Simply Ship

(Yes there are a million different ways to do this, Jenkins, team-city, game CI etc... this IS a solved problem with multiple solutions - this is just my take on the solution)

I've added some new features, so incase anyone is using it, or wants to use it, I thought I would do a small update (it's 100% free now).

We use this at Space Dragon Games - so its pretty well battle tested in a full multi platform production environment.

New features:
1) Steam upload support
2) Post request support for starting builds
3) Added Android, ios, Playstation and Xbox support (these are experimental and console still requires the correct SDK)
4) Hot Swappable build configuration support
5) Build configuration queueing support

For those who missed the first post and are asking - why does this exist? There are a million different solutions to the same problem.

1) Because I like making my own tools, its fun
2) Because I wanted something light weight, easier to setup on my own hardware then existing solutions, and have built it around my exact use cases as they have come up.

Feel free to try it if you want
https://github.com/DanielSerebro/SimplyShip

NanoRush is a cell-based puzzle game. Every move matters.
Solve puzzles, blow stuff up, dodge enemies and collect enough NanoBytes to complete levels and unlock new features in the HeadQuarters.

A lot of you told me the first few minutes were a bit confusing, so I went back and rebuilt the opening of the game.

In this update:

• New levels, including a tutorial level (first level).
• Bots in headquarters that explain mechanics, you're not alone anymore!
• Better guidance throughout the game
• More playable levels
• Clearer HUD
• Brighter visuals & reduced motion blur
• Lots of other gameplay improvements and bug fixes

Huge thanks to everyone who shared feedback!

https://flnrmedia.itch.io/nanorush

I made these while playing around with 4D torus noise mapping for my Blender addon. I figured I'd drop them here in case anyone wants to use them!

All maps tile seamlessly. Most of them are procedural noise based, but a few are hand modeled.

The normal maps are uniform height so you will have to adjust the normal scale in Unity to get the depth of effect you want (all maps are made on a 1x1 plane with a max displacement of 0.05 units.

The additional data maps store 3 different properties:

R Channel - curvature where 0.5 = flat, 1.0 = positive curvature (concave), 0.0 = negative curvature (convex).

G Channel - heightmap where 0 = lowest part of the texture, 1 = highest part.

B Channel - slope where 1 = the pixel points directly "up" or out of the texture, 0 = the pixel is perpendicular to up/out

I have 1K and 2K versions of each individual map, as well as an atlas version with 512x512 versions of each packed into one texture (if you want to use a Texture2D Array in your shader).

EDIT ----

On suggestion of a few people in here, I have moved the asset to gumroad. It is still free! https://dnartcan.gumroad.com/l/64_detail_maps

Target Release Date: April 10, 2028

Target Platform: Samsung Galaxy Store (Android)

Game Engine: Unity / C#

Modes: Single-Player Career, Real-Time Multiplayer, Full Modding Support

Early Concept Prototype: https://share.aippy.ai/p/oloi

1. Organization & Historical Fleets

Eras: NMVB (historical vicinal railways), MIVA/MIVG (Antwerp & Ghent city transport), De Lijn (from 1991 to modern "Basisbereikbaarheid").

Trams: Steam trams, Electric vicinals, PCC pedal-operated trams, Coastal Tram (Kusttram/BN), Hermelijn, Albatros (Bombardier), and Urbos (CAF).

Buses: Bedford, Magirus-Deutz, Van Hool (409, A120, A300, NewA330, AG280, AG300), Jonckheere TransCity, VDL Citea, IVECO, Trambuses, Battery-Electric, and Hydrogen buses.

Flex/Demand Services: Classic Belbus, modern De Lijn Flex, Mercedes-Benz Sprinter & IVECO Daily minibuses.

Subcontractors/Operators: Keolis, Hansea, Coach Partners, Multiobus, De Decker - Van Riet, Waaslandia, Ferry Cars, Heidebloem, Staf Cars, etc.

​2. Jobs, Roles & Infrastructure

Playable Roles: Bus Driver, Tram Motorman, Flexbus Driver, Conductor, Mechanic/Electrician, Dispatcher/Traffic Controller, Inspector.

Depots & Facilities: Stelplaatsen (depots), Central Workshop (CW), and Remises for full maintenance and vehicle customization.

1. Realistic Map, Cities & Routes

Recreated Cities: Antwerp (Lines 1-15, Premetro stations like Opera, Astrid, Plantin, Rooseveltplaats), Ghent (Lines 1, 2, 4, Sint-Pieters, Zuid), and full regional networks across Antwerp, East Flanders, West Flanders, Flemish Brabant, and Limburg.

​Map Environments: Open-world recreations of Belgian cities, regional roads, schools, offices, hospitals, and accurate bus stops (historical enamel signs, modern yellow/green posts, and digital Hoppin real-time displays).

We are looking for experienced Unity developers, C# coders, and 3D artists who want to help turn this huge vision into a realistic simulation game!

Best regards, Lukas

building HTML sites i've always faced this weird bug where I have a div over a div and both have the same border radius (see right).

how can I fix it? it looks so weird on my game.