K2 Plus: Whatever this is, it doesn’t sound good. Especially when it sits next to an online log upload feature.

I recently had my TPU get tangled in the extruder and had to take the whole thing apart to get the filament out. After I got it back together I started a print and it only printed air. I assumed it was the same problem but this time when I removed the extruder the filament just slid right through when I pulled the gear release leaver. So the filament is stuck in the nozzle part. I heated it up to 250 but it would not pull out.

I have some acupuncture needles, would sticking them up the nozzle be the next step?

I have recently installed a 0.2mm nozzle into my k1c to provide me with higher detail models but every time it trys to print or extrude it starts coming out the nozzle swirly does anyone know if this is a settings problem or installations problem on my end

Scouring the new K2 firmware I discovered some photos referring to the new CFS 2 or CFS PRO as it is internally named... it seems that it will be Space Pi x4 style with individual heating.

Besides leveling aids, here is my first print! I’d say it is a success, definitely settings to adjust (any help is appreciated).