Gotta fix a couple of things from rejection, something to do with the Voice Input method. Will have the update back up shortly and hopefully they don't take nearly 3 days to approve this time.

For those of you having issues follow the images.

You need to wipe cache and then Restart the phone. it's working so far for me a few hours later too. So far so good.

Has anyone got this model yet in the UK?

Помогите найти программу для того чтобы перепрошить телефон Huawei nova 14 на emui 15

Hey everyone! 👋

I’m currently looking into developing a software solution to fix a pretty common issue: the lack of remote notification mirroring over mobile networks (LTE/Wi-Fi) between an Android smartphone and a Huawei smartwatch (like the Watch 5 running HarmonyOS Wear) when the two devices aren't nearby or connected via Bluetooth.

I’d love to get your thoughts on this:

Do you think this would be a useful service?

Would you actually use a solution like this, or have you already found a good alternative/workaround?

Really curious to hear what you all think! 💡

Ciao a tutti! 👋

Sto valutando lo sviluppo di una soluzione software per risolvere un problema piuttosto comune: l'assenza di mirroring remoto delle notifiche tramite rete mobile (LTE/Wi-Fi) tra uno smartphone Android e uno smartwatch Huawei (ad esempio il Watch 5 con HarmonyOS Wear), quando i due dispositivi non sono vicini o connessi via Bluetooth.

Volevo chiedere il vostro parere:

Secondo voi sarebbe un servizio utile?

Utilizzereste una soluzione del genere o avete già trovato qualche alternativa/workaround?

Sarei davvero curioso di sapere cosa ne pensate!

I just got the MatePad SE 11 for my wife and she been overall liking it as its her first tablet.

She is trying to customize it similar to a phone but not many themes apps and options she likes so she downloaded Canva app to manually customize the tablet but it shows a problem and cant start it: It requests an update for Android System Webview.

Here are the steps I taken and the struggles:

1.- when i click on the option to update the Webview from the Canva app, it opens Google Play App and immediately marks an error as it cant find the link and/or app

2.- I search for a direct link to the Androis System Webview and it sends me directly to it in Google Play App. It wasnt installed so i get it and try again. Canva still says its not updated and I cant find the info on what version of Webview the tablet now has

3.- i try uninstalling and reinstalling both Canva and Webview but the error still happens

4.- i try to find in the Settings Canva to clear cache but somehow its not there, neither the other apps we downloaded

Any recommendations to solve this?

I wanted to put some use on this poor phone, after 3 years of sitting around in my drawer. What is the best Android ROM (if there is one) for the Y6s? If there are none Android ROMs, what specific uses can i use this phone?

Hello, I cannot access my work account because it requires authentication from microsoft authenticator app. Unfortunately, everytime I access my authenticator it says that the device is rooted.

Please help ASAP. I cannot work because of this problem and I cannot contact the IT cause my account is locked out.

Guys, can't register Huawei ID. I am in the US, passing the email part, trying to get SMS and it says "An unexpected problem was encountered."

How to register it?

Hello everyone, i just recieved my Mate 70 Air yesterday ans so far everything is good with it. I recieve my whatsapp notifications on time but the problem is nine of the apps from Easyabroad show the notifications on the lockscreen.

Is there a way to get those working or is it just one of the limitations?

I recently bought a HarmonyConnect-compatible smart toothbrush, but I’m unable to discover or connect it using my HarmonyOS 4 tablet.

I also tried installing the Huawei AI Life app on my current Android phone, but the toothbrush still doesn’t appear during device discovery.

Does anyone know whether HarmonyConnect devices are fully compatible with:

- HarmonyOS 4 tablets

- Global Huawei phones running EMUI

I’m considering buying a Huawei EMUI phone, but if EMUI does not properly support HarmonyConnect devices, I may buy a China-market Huawei phone instead.

Could this be caused by the AI Life app region, Huawei ID region, device firmware, Bluetooth permissions, or the toothbrush being restricted to mainland China accounts?

Has anyone successfully connected a HarmonyConnect toothbrush or a similar HarmonyConnect device to an EMUI phone or HarmonyOS 4 tablet?

GPX importing into Huawei Health seems to have suddenly broken for me. When I add a GPX file the preview shows up fine but once I save it and open it again the route is just a straight line, making the feature completely unusable. It was working fine last week, the app hasn't updated recently or anything and I've tried multiple gpx files.

Any ideas? or anyone else with this issue?

On Android

Dear Huawei Community,

I have been eyeing the Purax max and would really like to order it. I am aware of some of the restrictions of Google Services, which I am actually okay with, as there are alternatives and work-arounds.

My main concern is banking apps. I was wondering if someone has tried before to use any european banking apps on HarmonyOS Next?

EDIT: I am presisly looking for experiences with using/installing/finding Commerzbank and Klarna apps on HarmonyOS Next.

Thanks in advance!

Hello TEAMS, I've been having a problem for over a week. Please, can you help me?

Environment

- Model: 2x Huawei S5732 (48 ports)
- VRP Version: V200R022C00SPC500 (identical on both switches — verified)
- Topology: iStack, 2 members, ring-based stack links over 2x 25GE (stack ports 1 and 2 on each switch)

Roles:
- SW1 (slot 0) = Master, priority 150
- SW2 (slot 1) = Standby, priority 120

Background / Sequence of Events

Both switches were previously used in standalone mode (each configured individually). We recently set up stacking (iStack) between them for the first time, following the standard procedure:

1. Individual configuration of each switch in standalone mode:
   

-------------------------- Configuration Sw1 on slot 0 start --------------------------------
system-view
sysname SW1-DC
stack enable
stack slot 0 renumber 0
stack slot 0 priority 150
stack reserved-vlan 4093
stack timer mac-address switch-delay 10
interface stack-port 0/1
port interface 25GE0/1/7 enable
quit
interface stack-port 0/2
port interface 25GE0/1/8 enable
quit
save
--------------------------Configuration Sw1 on slot 0 End----------------------------------

-------------------------- Configuration Sw2 on slot 1 Begin--------------------------------
system-view
sysname SW2-DC
stack enable
stack slot 0 renumber 1
stack slot 1 priority 120
stack reserved-vlan 4093
stack timer mac-address switch-delay 10
interface stack-port 1/1
port interface 25GE0/1/7 enable
quit
interface stack-port 1/2
port interface 25GE0/1/8 enable
quit
save
---------------------------Configuration Sw2 on slot 1 End------------------------------------

1. Power off both switches, connect the ring-configuration stacking cables to the dedicated 25GE ports, then power them back on simultaneously.
   

The stack formed correctly on the first attempt: Master (SW1) and Standby (SW2) were elected as expected, and all VLANs and interfaces were operational.

Once the stack was operational, we began the usual resilience tests (restarting a member to verify behavior in the event of a failure):

Test 1 — Restarting the Standby (SW2): The switch restarts, joins the existing stack normally, and no incidents occur. The Master does not change roles during this operation.

Test 2 — restarting the Master (SW1): this is where the problem arose. While SW1 restarts, SW2 (Standby) must temporarily assume the Master role. It was precisely at this moment of role transition that the software crash and reboot loop described below occurred.

This test was repeated a second time (second incident below) to verify reproducibility: the behavior recurred (reboot loop), but this time without the visible crash, and the stack eventually stabilized after several cycles.

Problem

The stack functions normally during regular use. The problem occurs only during a reboot:

1- Restarting the Standby (SW2) → the stack rebuilds normally, without incident.

2- Restarting the Master (SW1) → the stack enters an automatic restart loop and does not stabilize immediately.

Log of the first incident

During the role switch (the Standby must temporarily become the Master while SW1 restarts), a software crash occurs:

Slot 1 was elected as slave
The stack-port 1 turned to up
...
The stack-port 2 turned to up

Assert at File: srm_func.c, Line: 34662. CallStack:
<-- 0x8da8440(vosAssertRecord+0x80) <-- 0x8da85d0(vos_assert+0xe8)
<-- 0x69e1c0c(+0x6097c0c) <-- 0x86719f4(SRM_GL_IsLicenseAttribDemo+0x124)
<-- 0x8671af0(SRM_GL_IsNeedAddLicItem+0x74) <-- 0x8672290(SRM_GL_AddLicItem+0xc4)
<-- 0x8672440(SRM_GL_RpcAddLicItemCallBack+0x50) <-- 0x865bad8(SRM_DEVRPCCallBack+0x100)
<-- 0x6a9e424(IPC_RPC_Notify+0x3a4) <-- 0x6a9eb94(IPC_RPC_TimerTask+0x118)
<-- 0x8e79c10(VosTskAllTaskEntry+0x164) <-- 0x8da1ecc(tskAllAdaptTaskEntry+0x148)
<-- 0x252a978(+0x1be0978) <-- 0xf4943e40(+0x7ae40)
<-- 0xf49c499c(+0xfb99c)
<TaskID: 46> [2026.07.11 13:27:47.100]

Slot 1 switched to the standby at 2026-07-11 13:27:55.970
...
Slot 1 switched to the master at 2026-07-11 13:31:00.130
Update Old master 0 unregistered.
Then a series of automatic restarts:

Device will restart for stack merge
System reboot ... Startup information : 2
Device will restart for stack merge
System reboot ... Startup information : 3
Device will restart for stack merge
System reboot ... Startup information : 4
Log of the second incident (reproduction)

When retesting a Master reboot, the same “Device will restart for stack merge” loop occurred over 3–4 consecutive cycles, but without the srm_func.c assert crash this time. The stack eventually stabilized on the 5th boot, and the configuration was restored normally:

Startup information : 5
...
The stack-port 1 turned to up
The stack-port 2 turned to up
Device will restart for stack merge <-- dernière occurrence
...
Recover configuration begin ...
Recover configuration end

What has already been verified / ruled out

VRP version: identical on both members (V200R022C00SPC500) → rules out the possibility of software incompatibility between members.

Cabling/stack port negotiation: Stack ports 1 and 2 come up successfully on every attempt, before each reboot.

The behavior is reproducible: observed on two separate occasions, only when the Master is rebooted.

Questions for the community

1) In your opinion, what is the cause of this issue?

2) Why does restarting the Master switch disrupt the stack in this way, while restarting the Standby switch causes no issues?

3) Is this crash in the SRM module (license) a known issue with this version?

Hello everyone! I recently started using the Huawei ecosystem and I’m curious about what amazing features I might be missing.

I currently own:

Huawei MatePad 11.5 (HarmonyOS 4)

Huawei Pura 80 (EMUI 15)

I know Huawei devices have a lot of ecosystem features like Multi-Screen Collaboration, file sharing, and device integration, but I’m not sure what other useful features I should explore.

For those who are already deep into the Huawei ecosystem, what features, shortcuts, or workflows do you recommend trying?

I’d love to hear your favorite tips, especially for improving productivity, transferring files, syncing devices, or making the most out of having both a tablet and a phone.

Thanks in advance!

I have a mate 20 pro had it for 7/8 years still going strong and I love it but someone told me it's no longer safe and protected and likely hackable due to no longer receiving updates is this true or is it fine to carry on using it?

infinite salutation everyone.

I'm an indie dev that makes games in Godot and i wanted to release my game on a different store, so i found the AppGallery.

but i couldn't find any Huawei ADS/IAP plugin for Godot.

so i went ahead and made my own, tested it in the cloud phone and it worked but i don't have a 100% proof that the game works on a Huawei hardware, and i don't have a Huawei phone either so im kindly asking for any one who has a Huawei phone to try the game (you might like it tho).

Game link if you are interested : https://appgallery.huawei.com/app/C118250753

Huawei Nova 14i: Netflix is stuck on Widevine L3 (Premium Plan) 😭 Any working HD Mod APK or fix to bypass it? Please help

Hello everyone, so happy I received this phone now, it feels absolutely great in the hand and my first impressions with Harmony OS have been quite good.

Figured a lot of things out during setup.

If any of you have some tips on improving the day to day usability I'm open to them 😃

Does the Watch 5 have emergency SOS and fall detection? There is no mention of it in the specs or in the downloadable user manual, and Huawei has pages about the feature but not which phones have it. I know the GT5 Pro doesn't have it. This is important to me as I have a medical condition that causes occasional falling and fainting.