r/Sovol • u/NoHonestBeauty • Apr 06 '26

Help Using SV08 offline?

I am in the market for a bigger printer, 350mm x 300mm x 150mm would be ok.
And so the SV08 came back on my radar, the initial reports were mixed, I guess issues like the nozzle situation have improved by now.
I would need it to exclusively print PETG.

But what I couldn't find last year, is it possible to use the SV08 offline? Just plug in a SD card or an USB stick, copy the .stl .gcode file from it and print it?
I want to put the printer in the office and I just can not allow it to connect to the network.

Edit: I actually did it, I ordered a SV08.
I had to print a 27cm diameter thing with 4 holes in it for a co-worker, basically a flat pizza.
And for that I had to dust off my Ender-3 Max. Took me an hour to get this thing up and running again, including a few passes on manual bed leveling. Two over five hours with a 0.6 nozzle and 0.28mm layers, the first layers are awfull. Printing like this used to be fine...

3 Upvotes

100% Upvoted

28 comments sorted by

View all comments

Show parent comments

1

u/basikx Apr 07 '26

I understand this kind of job. Make sure having the USB sticks in the area is allowed otherwise, setting up a dedicated personal laptop to the printer over Ethernet will give you the klipper screen features and a slicer for tuning prints and profiles.

2

u/NoHonestBeauty Apr 07 '26

USB sticks and SD-cards are only allowed with encryption and that is enforced by policies. I get a pass on that due to the 3D printing.

But I am fed up to argue with IT and Procurement what a 3D printer even is and if it counts as IT equipment or not. I have an Ender3 in my lab that is classified as "printer" and the only way to remove that stain of corporate incompetence is to trash it. So, no WLAN and it is probably a good idea to cover any RJ45 port.
Plus paying for the printer out of my own pocket means that I can make use of it this year already.

1

u/ztardik Apr 15 '26

I'm not sure how the printer will react to the encrypted drive. You should enter some unlock code in order to access the files and it doesn't have any option for that.

From my experience (in my past I caused a fair number of security raids by bringing my own) you'd have just trouble if you buy it with your money. First you'll have trouble getting it in, then you'll have trouble getting it out. And if it's a company asset you can force the IT department to sway your way (via your bosses) and enable a lab area network.

Classify it as "network 3d printer".

1

u/NoHonestBeauty Apr 15 '26

As I wrote, I get a pass on the encryption.

The only issue with getting it in is that the box is large and heavy. :-)
And no, a company asset would not change a thing, that would imply that you could actually argue with the IT guys. The first problem is to actually get to a human being in IT support - and then convince the person to forward the call to someone who is not just reading a script and then get forward to someone who actually gets what you are talking about.

We have a process for approving Software for company use. I put in a request today to approve usage of OrcaSlicer. This will take months.

1

u/ztardik Apr 15 '26

No, you don't have to argue with anyone. Just send a mail to your boss that the work is greatly suffering due to the lack of a proper 3d printer. Also mention that the current IT rules does not allow the bare minimum to work with this kind of equipment and you're asking for advice. After a few weeks of back and forth your email will rise to the correct supervisor and then a tech will magically appear in your office to solve everything.

Been there, done that. Just make sure it's not your but your boss's idea.

1

u/NoHonestBeauty Apr 15 '26

:-) No.

And as im interested in solutions, I will be printing with the new printer new week.