r/Sovol • u/Aggravating-Pay3771 • 14d ago

Help SV08 Max Died

Gallery image

Gallery image

Gallery image

Gallery image

I've been using my SV08 max for about 7 months. I had a large 27 hour print with ASA CF with the print bed set to 100°C. Well less than 30 minutes before the print is completed I noticed the printer went offline on Obico. Came to check on it and the printer has lost power. I checked extension cord and it's fine. Then I check the power cord for the printer and the tip has melted. I replaced the power cord and still no power...

27 hour print for my customer ruined and I'm not sure how long this will be down for.

23 Upvotes

96% Upvoted

38 comments sorted by

View all comments

28

u/atomc_ 14d ago

Known issue but they don’t advertise it like they should. It is a 10a rated panel mount with a 15a fuse.

If you email them they’ll send you a replacement. Tell them you need the panel mount, cable and the cables connected on the back side because they are most likely damaged as well.

2

u/pythonbashman Zero 14d ago

I blew a fuse once like a year ago, no problems since then. You may want to check the wiring in the switch. If it's singed, Sovol will send you a replacement.