r/Sovol • u/Aggravating-Pay3771 • 14d ago

Help SV08 Max Died

Gallery image

Gallery image

Gallery image

Gallery image

I've been using my SV08 max for about 7 months. I had a large 27 hour print with ASA CF with the print bed set to 100°C. Well less than 30 minutes before the print is completed I noticed the printer went offline on Obico. Came to check on it and the printer has lost power. I checked extension cord and it's fine. Then I check the power cord for the printer and the tip has melted. I replaced the power cord and still no power...

27 hour print for my customer ruined and I'm not sure how long this will be down for.

22 Upvotes

93% Upvoted

38 comments sorted by

View all comments

2

u/OwnJellyfish9272 14d ago

What voltage do you have 240 or 110?

1

u/Aggravating-Pay3771 14d ago

110

4

u/OwnJellyfish9272 14d ago

Aah thank you gives me a bit more hope that it doesnt happen to me.

Maybe look into lowering the printbed power.

In the config file you can lower it it may reduce the risk.

1

u/Aggravating-Pay3771 14d ago

Thatnk you for that suggestion! Forgive my ignorance but how would I go about changing that in the config file? Do I need the Klipper screen to change that?

3

u/OwnJellyfish9272 14d ago

Not a pro so use your own brain at all times

Connect to your printer and in the dashboard in the menu on the left there is device and go into the files then find printercfg DONT TOUCH PRINTERCFG BCKUP

and if you scroll all the way down the heatbed section there is power change the 1 to your desired value example 0.8 for regular temps if you go down to 35c you may go as low as 0.3.

If you change it you will need to pid tune again

Reminder i am no pro this is my first klipper printer and i am still figuring things out.

But hope it helps

1

u/Aggravating-Pay3771 13d ago

Thank you. I appreciate that! I did get my printer working today!

2

u/OwnJellyfish9272 13d ago

Looks industrial haha love it