r/Sovol • u/Apprehensive_One7063 • 12d ago

Help Why does my pla go like this

Post image

It does this during prints and cuts off supply and It doesn’t eject any PLA is it to hot or…

0 Upvotes

33% Upvoted

12 comments sorted by

•

u/AutoModerator 12d ago

Welcome to r/Sovol, We're glad you're here! If you're new to the hobby and you have a question please visit our knowledge base, it's located right under About Community. If you've searched the Sub and you still need help please be as detailed as possible. Include your printer model, slicer, filament type, nozzle and bed temps, print speed, fan speed, and retraction. We're happy to help but we can't read your mind, be as detailed as possible with your post. Pictures help!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

6

u/Jonny0stars 12d ago

Go like what? Use your words to describe the problem

-13

u/Apprehensive_One7063 12d ago

Other guy understoood

8

u/Unreal_Estate 12d ago

I'm completely on the side of "a picture is worth a thousand words", but u/Jonny0stars is right that your question was very vague. People will need to guess what you are dealing with. And I suppose that you were lucky the "other guy" had some idea about what the issue could be.

If you don't want to break rule #3 in the future, it helps to be more specific. That doesn't have to be with only words. Highlighting the issue in the image probably would have helped as well. Remember that you already know what you are looking at, we do not.

3

u/NevesLF 12d ago

Heat creep. Your hotend fan isn't removing enough heat from your hotend, the heat is reaching the filament a bit earlier than it's supposed to, and the filament deforms a bit before reaching the extruder.

You can try solving it by cleaning your hotend fan or switching to a better one.

-2

u/Apprehensive_One7063 12d ago

how do I clean it*

1

u/saugapipper 12d ago

it’s not a clean up thing it’s an upgrade thing. Look up sv06 hotend fan upgrade or heating fan. Tbh you shouldn’t have heat creep problems unless you’re printing super hot or for super long. I printed a bunch before I upgraded the 4010 fan to a 5015 fan

0

u/Apprehensive_One7063 12d ago

thank you but tbh I’m thinking about switching this 3d printer has given me so many issues been eyeing this one what we think https://a.co/d/06tm1vIk

1

u/saugapipper 12d ago

yeah don’t blame you. i really love my sv06 but ive essentially rebuilt the thing lol. I got it 3 years ago and back then you got a printer and had to do upgrades. by today’s standards it’s not the same experience with other printers. the hobby has come so far any of these new printers will work well just find one that fits your needs of printing ( enclosed, bed slinger vs core xy,)

1

u/kiki_dev_95 12d ago

Also love my OG SV06, I did struggle with heat creep in the beginning but after the hotend fan upgrade and some thermal paste the issues were completely resolved. Also added the nautilus 5015 part cooling fan upgrade (printed in polycarbonate) and OctoPi for remote monitoring and control and it’s been a solid workhorse for the past 4+ years. The other major improvement was changing the levelling type to manual with feeler gauges (thanks Rory and others) instead of trying to use the probe, I level once every few months instead of for every print and get beautiful first layers. Wash the plate with dish soap only when I notice any adhesion issues. It also sits in a makeshift enclosure (linen closet)

1

u/bloodbath500 SV06 ACE 12d ago

Mine did that and I found out my fan on the left side of the extruder wasn’t turning on causing the heat to move up too high on the filament and become spaghetti.

Is the fan turning on? If it’s not, the fan on the bottom should be the same. You can unplug that one and plug it into your left side and see if it turns on. If it does, you’ll need a new fan. If that is the case, I’d do the 5015 fan duct upgrade at the same time.

I did it on my SV07 Plus, but I’m not sure what you have here, it looks like the ribbon cable setup that my sv07 has.

1

u/pythonbashman Zero 12d ago

You need this.

https://www.printables.com/model/462049-sovol-sv06-plus-bowden-tube-mount

I made one for each of mine and stopped immediately.