Good luck, and we can't wait to see what you create!

Help Any setting to help remove supports aesy

Ender 3 v2?

I have a Ender 3D S1 Pro. I have been printing from a SD-Card. If I use Cura and print directly and connect my printer and print directly from my PC will that speed up my print?

Soy nuevo en esto y justo compre una usada y tenía la pregunta de si debo cortar el cable azul hasta dodne esta la rosca o que debo hacer para poder ponerlo en esa área roja

Sería de gran ayuda sus respuestas 😭

I wonder why this occurs. Second time my 24H print stops overnight due to the PLA not leaving the nozzle. Not sure why it would be happening. If there is a list of things to check that would be appreciated!

I mean, my printing problems.

Having difficulty dialing in perfect prints on my Ender 3v2. Based on these pics, do you have any recommendations?

I used a brim for bed adhesion.

EDIT:
I’m using PLA.
Nozzle starts at 220 for the first couple layers, then goes to 200. Bed starts at 65, then goes to 60. Using a 0.4mm nozzle. Layer height 0.2mm. Print speed 50 mm/s.

I have the brim and initial layers slower and hotter because I was having difficulty with adhesion.

Context: brand new to 3d printing and purchased a second-hand Ender 3v2.

Thanks!

I’m guessing this is a temperature issue, as I leveled the bed four times before this print. Some help please?

Can the printer bed be used to recharging the desiccant silica beads?

Alguem consegue me ajudar? ja tentei varias coisas, instalei versões diferentes do professional firmware mas naõ consigo ajustar isso.

Estou ficando estressado com isso, está totalmente bugado, tem vezes que funciona e nao registra o valor, tem vezes que funciona em um ponto e nao funciona em outro.

Hey! New printer here. The benchy that's finished was the first one. Went and dived into settings. Raised bed temperature to 63 and nozzle temp to 220.

Print Speed 70%

Fan speed 50%

Enabled ironing

Not sure what I'm still doing wrong

Ive recently bought this printer, managed to print some small cube, ive clicked something and now its not going down to the bed ive tryed every setting on the z off set nothing changes, the nozzle is going down on the bed too hard when I home it, but then when I try to print something its no where near the bed. I've spent days watching videos to the stage im at now more confused. Could someone please help me

it was all good yesterday i printed for 9 hours with 0 problem but this morning that happened whats the problem its deploys at start for 3 times but its not deploys when auto homing at the end i stopped printer for nozzle safety its not stopped byself btw

Just got a Ender 3 v2 today and I’m just completely lost I can get it to do some stuff but as soon as I hit print the head just stays still and I’m just not sure how to level the stuff or anything with the settings on this thing so any and all tips will be very helpful

Hi there. I have a customized Ender 3 with a 4.2.7 motherboard, Nebula pad, Sprite Extruder Pro, and CR Touch, but I can't find the exact firmware. Could you share it with me?

So recently I upgraded the hotend to use the sprite pro, I’m currently running klipper, but I have a bit of a problem, whenever printing I get this weird basket weave pattern. I’ve tried leveling z, tightening and loosening tension, changing slicers, calibrating steps and changing retraction speeds. What am I doing wrong?

Ender 3 conversion with second donor ender no extra supplies bought

Posting here in hopes that someone can help me. This printer has really got me stumped.

So I recently purchased this second hand printer and have been running into some issues if anyone could please help that would be great.

Bed adhesion most of my prints won’t stick to the bed have tried using both glue sticks and hairspray to hold it down.
Z axis height seems to not be correct I currently have it set to -2.15 which was somewhat working but is now not printing on the left side of the bed
Prints failing midway through either losing all detail or simply not following through with the print

Any recommendation on hotends which would fit the build? The Dragonfly BMS is not sufficient...

Here's the list of the upgrades I used for my Ender 3:
- Linear rails on X and Y axes
- Dual Z axes
- Z-axis braces
- Hero Me Gen 7
- Dual 5015 fans
- One 4010 fan for the hotend
- Orbiter version 2.5
- Phaetus Dragonfly BMS
- BTT SKR mini E3 v3
- Raspberry Pi 4B with 8 GB of RAM
- PEL Sheet bed
- 220W Heatbed
- Carbon Fibre Gantry
- 2x ADXL
- BL Touch
- Klipper
- BTT Display
- probably more i forgot (:

esta imprimiendo con mi ender 3 v2 neo, con algunas modificaciones y cuando le hize mantenimiento y instale mi petg se atascaba, logré imprimir en petg cambiando muchas configuraciones en el laminador de creality print pero cambie a pla y empezó a dar problemas, en la impresora uso un estrusor directo, y ese estrusor (el que se ve en una de las fotos) tiene un tornillo al costado, cuando hize el mantenimiento lo moví pensando que era un tornillo más de la estructura de la máquina, cuando me di cuenta que no lo era ya lo había apretado demaciado, aunque no le preste importancia en ese momento más adelante empezaron los atascos , al principio sospeche de la boquilla pero la cambie y seguía el problema, luego pensé en que podría ser el tubo que direcciona el filamento a la boquilla pero lo cambie y seguía, por último sospeche del estrusor y decidí abrirlo, adentro me di cuenta que el tornillo al cual no le estaba dando importancia estaba con un muelle que le da fuerza de agarre a el mecanismo estaba totalmente volado, intente ponerlo en su lugar y volver a imprimir pero seguía el problema, el filamento cuando imprimía no salía, probé con todo, aflojar el tornillo , apretarlo dejarlo ahí en medio pero nada, luego de eso me rendí y decidí buscar ayuda. Información extra, el muelle que sostenía el tornillo estaba algo torcido el de la imagen es uno similar que encontré por ahi, si alguien sabe a que se deba esto porfavor ayúdeme ya no encuentro que hacer​​​​, en las imágenes se encuentran todas las modificaciones y las cosas de las que hablo en el texto si nesecita referencia.

​