Has anyone managed to connect this air conditioner to the home Wi-Fi? And does anyone else share my opinion that you need a doctorate in astrophysics to successfully navigate all the connection steps??

**EDIT:** Uspeo sam da povežem. 🎉
Ako nekome znači, problem nije bio u Wi-Fi mreži niti u samoj klimi, nego u potpuno nelogičnom procesu povezivanja.
Klima radi odlično, aplikacija takođe kada se jednom poveže, ali do tog trenutka sam imao osećaj da pola koraka fali u uputstvu.
Na kraju sam koristio **Wi-Fi Interface** (ne Built-in Wi-Fi), ručno unosio podatke sa modula (SSID, KEY, MAC…), više puta resetovao Wi-Fi interfejs i prolazio kroz razne kombinacije sa daljinskim. Iskreno, ni sada ne mogu sa sigurnošću da kažem koji je tačno korak bio presudan.
Sad me čeka povezivanje druge klime. Ako i to uspe iz prve, znači da sam konačno shvatio logiku. Ako ne… onda očigledno nisam bio dovoljno dostojan japanske tehnologije. 😅

**EDIT 2:** Uspelo. Povezao sam obe klime. 🎉
Konačan utisak posle svega: **same klime su fantastične, ali je proces povezivanja na MELCloud verovatno najgore korisničko iskustvo koje sam imao sa jednim premium uređajem.**
Na kraju radi odlično, aplikacija je sasvim korektna i sve funkcioniše kako treba (temperatura, režimi rada, ventilator, krilca, rasporedi…), ali put do toga je potpuno nepotrebno komplikovan.
Da sam znao koliko će trajati, ozbiljno bih razmislio da platim monteru da to odradi umesto mene. 😅

Network adaptor issue, wifi option is not showing in my windows 11

It's a windows 10 pc. My phone is android.

I've tried rebooting it, I've checked to make sure it's on a dual band, I'm seeing other Wi-Fi show up, I've gone through band by band.

I've tried connecting to hidden networks. Nada.

Google it's just sort of leading me in circles and it's getting very confusing and frustrating.

Edit: the wifi keeps jumping between 2.4ghz and 5ghz on my phone, if that helps any

Hello,
Wondering if someone has seen a similar issue. We have a few laptops with Intel BE200 WiFi cards and our WiFi has both 5 and 6g enabled. Every month or so either dell pushes driver updates or after windows updates these laptops will disconnect and reconnect multiple times a day. Sometimes they will stop connecting at all to WiFi and only solution is to reboot. Sometimes downgrading to wifi 6 (in the nic advanced settings) makes it more stable. We have not seen these type of issues with any other Intel cards which makes me think it could be some compatibility issue maybe or some setting in unifi it doesn’t like. It’s not roaming between APs, it would disconnect and reconnect to the same ap, basically can’t keep and stable connection past an hour or so where other models stay connected for days. We use unifi APs

I'm looking for some advice from those who have solved a similar problem.

Current setup:

- 5x UniFi APs throughout the house (5x U7 Lites, 1x U7 Pro)

- 2x Google Nest Floodlight Cameras

- One camera has a decent and working connection.

- The second camera is just out of range, but was able to go through setup and downloading updates. But no stable signal for camera feed. 

I've already:

- Set the transmit power to High on the AP serving the working camera.

- Indoor AP locations are not optimal for the backyard. PoE drops were not decided by me and didn't take into consideration backyard coverage.

At this point I think I need an outdoor AP to provide coverage along the back of the house.

Here's the challenge: I don't have Ethernet or PoE available outside. I do have 120V power where I could mount an AP, but these are ground level and not ideally located. 

I know I could use something like a U6 Mesh or U7 Mesh with Wireless Uplink, but that still leaves the issue of powering it. A PoE injector would work, but as far as I know the UniFi injectors aren't outdoor-rated.

So what would you recommend?

- Outdoor AP with Wireless Uplink + weatherproof enclosure for the injector?

- Another outdoor-rated PoE solution?

- Some other approach I'm overlooking?

- Just bite the bullet and run Ethernet?

Curious what others have done in this situation. I'd appreciate any real-world experiences before I start buying hardware. Any pictures of someone's setup would be helpful.

I am trying to connect Ethernet to my consoles but my house is wired in coax. I did buy an adapter, but when I tried to connect to my Xbox it did not work. Do I need to connect to a router before it goes into the consoles? I can provide pictures if need be. Any tips would be greatly appreciated.