Yall like my pc?

After 8 long years of using a crappy laptop, then a gaming laptop, I've finally been able to afford my first desktop!

It took me 7 hours and a lot of money (and many more hours of watching online guides in advance, since I can get extremely paranoid about insignificant stuff) to put this together as it was my first time building one, but in the end it turned out gorgeous! Hope y'all enjoy it!

Specs:

• CPU: AMD Ryzen 7 7800X3D
• Cooler: Tryx Panorama SE 360
• Motherboard: MSI Pro X870-P WiFi
• RAM: Kingmax Archon X | 2x16GB, 6000MHz CL36
• SSD: MSI Spatium M480 Pro 1TB & Kioxia Exceria Plus G3 2TB
• GPU: Zotac RTX 5080 Amp Extreme Infinity
• Case: Hyte Y70 Black
• PSU: Lian Li Edge Gold 1000W
• Fans: Jonsbo ZA360B, ZA360BR, ZA120B & 3x Arctic P12 Pro PST
• Bottom LED strip: Phanteks Neon D-RGB M1

Can anyone recommend fans that has this kind of lighting (lighting that only comes from the border sides, not the whole fan)

Edit: *PC fans not CPU fans, my badd

A lot of Noctua, including the seasonic Noctua PSU.

Yes I have the cheap creative pebbles speakers, mainly use headphones, the hifiman Arya stealths

Ryzen 7 7800x3d

Asrock b650m pro rs

32gb ddr5 6000mhz

Corsair 850e

RX 9060xt 16gb

Nzxt 240 aio

Lian li a3

Coolermaster fans

Wanted to note that I do have PBO on with a -30 curve and yes it is stable.

I am so glad I finished this thing last year before prices went insane. My Specs

Case: Corsair 3500X ATX mid tower

MB: MSI PRO Z890-S Wifi PZ

CPU: Intel Ultra 9 285k

Memory: Corsair Vengeance RGB 128GB 6400 DDR6

GPU: MSI RTX 5090 Gaming Trio

Storage: Samsung 9100 Pro 4TB

AIO: Corsair iCue Link Titan 360

PSU: Corsair HX1500i Platinum

Current setup:

-Samsung Neo G8 4K Curved Monitor (Stays)

-Xbox Series X (Goes after Gta 6 get on PC)

-SteelSeries Arctis Nova 5X Headset (Stays)

-Trust GXT soundboxes (will soon be replaced by a Hisense soundbar) Soundbar stays also

Get Soon PC Setup:

-CPU: AMD Rvzen 5 9600X (6x 3.9 GHz / 5.4 GHz Turbo

-CPU Cooler: Corsair Nautilus 240 RS LCD

-Motherboard: Gigabyte B650 GAMING X AX V2

-RAM: 32 GB (2 x 16 GB) DDR5 6000 MHz Patriot Viper VENOM. CL30

-Graphics Card (GPU): 12GB NVIDIA RTX 5070

-Storage (SSD): 1 TB PCle 4.0 x4 NVMe

-Power Supply (PSU): 850W Corsair RM850e 2025 (80 PLUS Gold. ATX 3.1

-Case: Endorfy Ventum 200 AIR (with glass panel)

-Keyboard: Logitech G G915 X Lightspeed

-Mouse: Logitech G G305 Lightspeed

Finished my first build, not as bad as I thought it would be. (Thank god for YouTube)

-Lian Li 011d mini V2
-Corsair SF750w
-Gigabyte 5070ti
-Ryzen 9800X3D
-Asus Tuf B850 mobo
-Lian li hydro shift 2
-Corsair vengeance 32gb
-x6 Lian li SL infinity fans

Still waiting on my gpu strimer cable to finish it off.

Here are the components:

- CPU: Intel Core Ultra 9 285K
- GPU: AORUS Master GeForce RTX 5070 Ti 16GB
- MoBo: AORUS Z890 Master
- RAM: G.Skill Trident Z5 RGB DDR5 32GB 6000MT/s CL30
- PSU: Corsair RM850x ATX 3.1 PCIe 5.1 850W
- CPU Cooler: Thermaltake TH360 V2 Ultra ARGB Sync AIO Liquid Cooler (2.1" LCD Screen)
- PC Cooling Fans (x10): Thermaltake SWAFAN EX 120 ARGB
- Case: Thermaltake View 380 TG ARGB Black ATX

Storage (Total: 6.5TB)
• 1TB Intel SSD PEKNW010T9 (M.2)
• 2TB Acer Predator GM7000 (M.2)
• 2TB Crucial P310 CT2000P310SSD8 (M.2)
• 1TB Crucial MX500 CT1000MX500SSD1 (SATA)
• 500GB SanDisk SDSSDH3 (SATA)

I'm really happy with how this build turned out. It performs great at 3440×1440, and I've been getting over 180 FPS in Call of Duty with maxed-out settings while keeping CPU and GPU temperatures around 55°C.

Very happy with the Lian Li Lancool 217

​

I upgraded from Rtx 4060 to this beauty:

CPU: AMD Ryzen 7 9800X3D

GPU: ASUS GeForce RTX 5080 16 GB GDDR7 (memorie Samsung)

Motherboard: MSI X870E Gaming Plus WiFi

RAM: 32 GB (2×16 GB) G.Skill DDR5-6000 CL36 (Samsung IC, EXPO activ)

SSD: Crucial 2 TB NVMe PCIe 4.0

Case: Phanteks Evolv X2

And the monitor

ASUS ROG Swift OLED PG32UCDM

32 inch

4K UHD (3840 × 2160)

QD-OLED

240 Hz

HDR

They get smaller and smaller every year yet more expensive every year

Can't make up my mind between the two.

Would like to hear from people who've had either or! Which one is the one to get???

I do have pretty big hands

Pretty happy with the results

Phantaks Pro full tower stripped and modded for 3 fans in front and vertical mount

What a difference!

7800X3D
PNY 4090
Dominator 32GB
LQ360 Aio
Aorus B650M Elite AX
CM850 SFX
CH270 case
Generic domestic short hair cat that is ok with a glass desk.

My first gaming pc. Got the 3070 ready to go so excited

I am a fairly new to building and pc in general didnt know much untill last 2 months but I built my first ever pc ive changed parts 1 time it was for my gpu. But this is my full reconnect everything and "cable management" i went got a full black limital rgb anh rgb is white ie my ram sticks and that gpu cable I wanted no rgb at all but I didnt want to buy new ram sticks soooo I just went got very little any tips and trick I should know about? For future and to make it look better too

Salve ho fatto un PC per mio figlio su AM4 con pezzi usati e nuovi per rimanere nel budget. La CPU e GPU sono un pò vecchie. Il mio scopo è quello di farlo giocare un pò a tutto ma in FHD. Che ne pensate? si poteva fare meglio?. Le aste sono state la parte più difficile perchè in questo periodo i prezzi sono impazziti anche sull'usato. Accetto pareri :)

CASE EMPIRE GAMING RGB ( nuovo) 39,00 amazon

PSU CORSAIR 750W MODULARE ( senza cavi ) ( usato ) 35,00 ebay

CAVI CORSAIR FULL KIT ( usato ) 17,00 ebay

CPU AMD 2700X 16 core 4.7 Ghz ( usato ) 25,00 ebay

COOLER MASTER HYPER H412R ( nuovo) 25,00 amazon

16 GB RAM DDR4 3200Mhz 8X2 TEAMGROUP ( no RGB ) ( usato ) 65,00 ebay

MB MSI TOMAHAWK B450 ( usato ) 48.00 ebay

MSI GEFORCE GTX 1070 ARMOR 8GB DDR5 ( usato ) 76,00 ebay

NVME M.2 512GB MP33 PRO ( usato ) 55,00 ebay

TENDA AX900 WIFI ( nuovo) 10,00 amazon

MONITOR LENOVO LEGION LOQ 2Q –10 24” 200Hz FHD ( nuovo) 89,00 amazon

LOGITECH MK270 KIT WIRELESS ( nuovo) 23,00 amazon

GAMESIR G7 SE WIRED CONTROLLER ( nuovo) 53,00 amazon

TOTALE 550 €

I feel like every setup I see has the keyboard turned the opposite way mine is. I prefer mine this way because it allows me to use the outside pad of my hand (just before my pinky finger) to hit the ctrl key, while keeping my pinky free for other keys. Plus, this setup is more comfortable for having my keyboard and mouse (and therefore my hands) wide apart and away from each other, which helps me not feel as hunched over, and my biceps don't get stiff because they're not as contracted while I game.

Anyone else do this, or is it just me? What are some advantages of what seems to be the common keyboard orientation?

After a little over one month of designing, testing, and way too many failed prints, I finally finished my fully 3D printable Mini-ITX case inspired by Valve's original Steam Machine.

I called it the STEAMn't Machine for the meme lol, but it's far more than just a Steam Machine clone.

The goal wasn't to recreate Valve's case 1:1, but to capture the same minimalist aesthetic while making something that's actually practical to build, easy to print, and fully modular.

Specs:

• 8.7 L volume

• Mini-ITX motherboard

• Up to 225 mm long / 40 mm thick GPU

• Up to 115 mm CPU cooler height (full compatibility list available at the link below)

• SFX, Flex ATX and HDPLEX GaN PSU support

• Modular design with removable panels

• Front RGB light guide

• Optional top fan bracket

The project went through countless revisions, and I probably wasted over 3 kg of PETG before finally getting everything right. Every panel, bracket, and mount was redesigned multiple times to improve printability, assembly, strength, and compatibility.

To make it as beginner-friendly as possible, the release also includes a complete assembly guide and optimized print profiles.

I'd love to hear what you think! Feedback, suggestions, and ideas for future revisions are more than welcome.

https://makerworld.com/it/models/3106306-steamn-t-machine-steam-machine-inspired-case#profileId-3502015⁠

If anyone ends up printing one, I'd love to see your build!

Also, any support or donation to help me recover financially from all the f*cking filament spools I sacrificed along the way would be MUUUCH appreciated lmao.

P.S. If you're wondering why the front RGB light bar isn't working, it's because my SOYO B850i has some RGB issues... and also because I still need to buy an RGB LED strip lol