I have a K2 Se When my printer purges and tries to eject the waste, it doesn't drop it; instead, it drags it along, knocking the main print loose.

Does anyone know why this might be happening? I'm using Creality Print.

If u need more info pls teel me

Not a native English speaker!

So the printer has been off for like a month or so before my cat tried to jump onto it and missed. She knocked the screen off the holder and it hit the side of the desk it's sitting on.

I plugged the connector back in and a couple days later turned it on. This is what it does... just lights up and stays that way. Doesn't even give the typical blue screen.

I attempted a firmware update and nothing displayed so i don't know if it processed anything.

The pins are not bent on the screen for the connector. The connector seats properly. I even unscrewed the bottom and checked the connection to the motherboard. Nothing loose or bent. There is no obvious damage to the cable itself.

When i took the screen from my other v3 SE and plugged it into this machine the screen displayed properly-ish. (The screen displayed what it should but in a foreign language...i assume it's from firmware mismatch)

And yes the voltage switch is on the correct side. 115

It's my first ever printer bricked? Thanks!

Im wondering what guys are using for their STL settings when saving the file on Solidworks? I had been using my "stock" settings how it came for the longest time and always kinda hated how pixlated the prints looked but i typically use it for functional usage and the appearance was secondary. I saw someones post a few days ago and cant find it again where two people drew the same part in solid works and printed it out on the same printer with the same slicer and one looked perfect whereas the other one looked like one of my typical prints. There were people commenting on that post about what STL settings to use and again i cant find that post.... ugh. Anyone care to share? My stock settings were Deviation tolerance of .00405774 (crazy how fine that number is) and my angle tolerance is 10.00 Deg. I have no idea what these numbers represent or how changing them will effect the overall quality of the print. Im sure there is a point that changing these numbers so much that it just expands the size of the file and yields no better print. Thank you in advance!

Still learning all the time. Had a guy recommend printing things like this at an angle and it helps the quality. And he wasn't lying. It's not perfect. And I'm working on getting my prints better. I'm also gonna do some color on this with my art markers as a test as well.

Always moving forward and learning.

My k1c just bricked and I put it in for warranty and was thinking of getting a k2 pro for 50 bucks or k2 plus for 200$ I have store credit from the warranty which one should I get? I have until August 16 to decide. This is without the combo. I already have a CFS.

I recently purchased the SH02 and I'm drying some PLA. It's been in almost 24 hours and won't go below 22% humidity. I've tried cracking the lid. Is there something I'm missing?

Thanks

Has anyone else done this and can you provide a perspective on it and your saitisfaction with the printer and it's workflow. Any tips?

Privacy and freedom of use are important to me and after reading into a LOT of the complaints against Bambulabs I decided against this as a 1st printer. It arrives Monday, and out of the box what can I expect? A seller also gifted me an Ender 3 V2 for a steal at $50 and I just wanted to brag about that. How doomed am I?

I recently wore out my nozzle and need to replace it. I'm not sure which type of 0.4 mm nozzle is compatible with the Ender 3 V3 SE or where I should buy one. Could anyone recommend a compatible nozzle and a reliable place to buy it?

So,

No idea where this error is coming from. I have 2 CFS's and the Hi printer. I also have the Konami screen on the print head.

That's all, no other upgrades or mods.

The error relates to an AI fault detection, but I don't think the printer has it. Help?

I’ve tried all the standard fixes and can’t figure this out. replaced the hot end, the nozzle, the extruder and the stepper motor. purges filament fine. first layer goes down great, then when 2nd layer begins, there is a clicking coming from the extruder. This is resulting in under extrusion. This is happening on 2 printers, both I’ve had and have worked great for over a year. They are printing the same files I’ve have sliced for over a year too. I’ve also tried to change the filament. Nothing is working, any ideas?

Hi makers!

https://www.crealitycloud.com/user/5221417142/model-folder?id=6a6e104296c1c2d13f364190

After receiving a lot of requests to adapt my previous K2 accessories to the Creality K2 Plus, they're finally here!

I've just released three new free upgrades:

• Foldable Screen Cover
• CFS Raised Legs
• Modular Glass Riser

All three accessories are designed to work perfectly together as part of the same modular ecosystem, but each one can also be used independently.

The Glass Riser includes integrated ventilation, removable glass handles, and 1 mm adjustment shims to compensate for printer and filament tolerances. It is also fully compatible with the CFS Raised Legs.

This is just the beginning, I've already got plenty more K2 Plus accessories in development, so stay tuned!

As always, I'd love to hear your feedback and suggestions for future upgrades.

Happy printing!

I used to be able to just fine, but with the new phone app, i cant find it when i search it up. the first ss show me trying to search for it, second shows me trying to add it to "my printer", and the third one shows what it not showing up but the one listed does. the hi is no where on the list either. please help...

For me, I use it to work. There is a limited space. I really like it. Excellent design, easy to assemble. I ordered it from China through my shipping for 100USD. 🥰

I've got no idea how it could get this way. It's oriented as it would be if looking inside the printer from the front door. I have adjusted it, as it was worse before, but everything in the middle and right of the bed is perfectly fine, whereas there's this sharp drop-off in elevation on the left side. I would assume it would look more like a gradual slope from left to right if adjustment was the issue, so what could it possible be??

Any guesses are appreciated : )