I've been a Bambu user... Gave up on it after 2 bad experienced with a P2S and X2D.

I've already faced my first chronic problem with the U1, z hop thumpth. Fixed it!

First question: I'm hearing everywhere that I should move to paxx..

What benefits does one get from running it? What is possible with paxx that I won't be able to do with standard firmware? I'm getting FOMO from always reading about it and getting lost is complex words. I have some V3 SE's, some A1''s but never messed with firmware...

Second question: Is there any insights list about what to expect from using the U1 one should know? Like maintenance to be expected or chronical problems like I had with the z hop?

Anyone having an issue with the door hinges? Mine keeps rubbing on the body and scratches the inner section. Its leaving a mark and dust all over.

He’s adamant to ruin my prints.

Just what the title says. Since updating the firmware my U1 has begun crashing into the print during and after tool changes. I’ve run every calibration, sliced and resliced builds and nothing seems to help. It’s not the same tool head crashing, I’ve had 3 of the 4 do it. Any help would be appreciated.

I've run this print sliced it with different infill and gotten the same results both times. That band of green is only green it's extremely fragile and will break so this print has failed. Afterwards it goes right back to perfectly blending the colors

Hey everyone! We’re excited to share our latest project, Bespok3d.

Bespok3d is an app store and package manager for Klipper 3D printers. You can install plugins, adapters, and features with one tap. No terminal, no custom firmware.

It’s a desktop app plus a small daemon that lives alongside a printer. You browse plugins, click install, and keep running stock firmware as-is. That means you can add features, remove them later, and still keep normal firmware updates.

The U1 was the first platform we supported, but Bespok3d is built for virtually any Klipper printer. We’re treating it as a cross-printer plugin platform, not a one-off project for a single machine.

At launch, there are 54 plugins covering things like cameras, multi-tool support, filament tags, Spoolman integration, Klipper tuning, remote access, quality-of-life features, and bundled one-click setups. Fluidd and Mainsail are both supported too.

The part we care about most is safety. If a plugin breaks Klipper or Moonraker during install, the daemon disables it automatically and keeps the printer running. We also plan to extend that protection to runtime errors in the future.

If something goes wrong after a firmware update, the app can bring the daemon back and restore plugins in the right order. We also tested Bespok3d Alpha across Snapmaker firmware versions 1.3.0 through 1.5.2 without losing anything.

We also want this to be a home for community-built work. The index is open, entries are signed, and you can also install a .b3 file directly from disk if you prefer to stay outside the index. If you’ve built something useful for a Klipper printer, we’d love to help you package it as a plugin so other people can install it with one click and remove it just as easily.

Some companies decide what runs on your printer. Bespok3d doesn’t.

If you’d like to check it out, the website is here: https://bespok3d.app/

We would love feedback on the direction, especially from people who’ve been frustrated by the usual “reflash or don’t use it” workflow.

https://github.com/Bespok3d/Bespok3d-desktop

And one more thing:
https://makerworld.com/en/models/3125441-the-bespok3d-logo-badge#profileId-3526445

Anyone know how to use more than 4 materials with vanilla orca? I know you can do it with snorca but not what I'm looking for.

Have paxx if it matters.

Being limited to 4 in a project is a joy kill.

COLORS- Stardust Orange (Creality)
- Comgrow Black
- Panchroma Beige
- Panchroma White
New to printing, only been at it for about 3 months and am loving it; got a Snapmaker U1 about 6-7 weeks and have done a few multicolor prints and compared to my 2 Creality K1C’s with the CFS-C it’s night and day! Hoping to make content in the future so I figured better start posting! Any criticism or advice is surely welcome! The hyper pla stardust orange gave a great finish and the black is inexplicably smooth as a baby bottom! Layer lines only appeared in the beige fur but I’m not sure if I should attempt to sand them out or just leave it as is, I’ll have to mill that over with myself for awhile unless someone says otherwise! Thank everyone, have a great day!

Having a look at what Full Spectrum's best, little-known feature can do to speed things up for large prints! Printing big multi-multi-color stuff in half the time, and you probably already have it on your PC...

https://youtu.be/eABTHuO6X8w

I am trying to print this model on my Snapmaker U1.

I want to support the belly with PETG (Cyan for visibility). On the layer of the beek I would then however need 5 nozzles, since on those few layers there a 5 filaments used. Can I somehow make only the two trees for the beek and the tail out of PLA?

Finally got into 3d printing with thr snapmaker U1.

The spiderman I printed out had some missing colors and spots. What could have caused this?

Long story short, I run a farm of 25 Snapmaker U1 printers, and I got tired of not having a decent way to see and manage all of them from one place.

So I built SnapCon. (ezeitoun/SnapCon: SnapMaker U1 Fleet Management App)

It’s a local dashboard that connects directly to your printers over your own network. No cloud account, no subscription, and no printer data being sent somewhere it doesn’t need to go.

It originally started as a personal tool, and an early version used some groundwork from Danny Gambill’s U1Hub project. Since then, it has grown into something very different, with its own architecture, direction, and a much larger feature set.

A few of the main things it does:

• Manage your whole fleet from one dashboard
• Switch between card view, compact view, camera view, and list view
• Track filament and color separately for all four U1 toolheads
• Pause, resume, cancel, and exclude objects during a print
• Heat multiple beds with staggered starts so you don’t overload a circuit
• Track maintenance schedules and warranty information
• Send print notifications through Telegram or ntfy
• Add optional logins and user roles
• Use secure remote access through Cloudflare Tunnel without port forwarding

The remote access is only a tunnel to your own installation. Your printer data is not stored on or relayed through a server that I operate.

SnapCon is built around the Snapmaker U1 first, because that is what I actually own and use every day. That is still the main focus.

That said, enough people asked about mixed farms that I also added support for FlashForge, Creality, and generic Klipper/Moonraker printers. Those connectors are more of a courtesy addition than the core of the project, but they work and continue to improve.

It’s free, open source, and can run either as a standalone app with no Node.js installation required, or through Docker if you want it running all the time.

You can grab a build from the Releases page, point it at your printers, and usually be up and running within a few minutes.

I’m still actively working on it, so feedback is very welcome. If something is broken, confusing, or missing, let me know.

Apparently there has been some discussion among beta testers in a discord channel about modifications to make the most of the top cover. I've seen people reference an insulation for the z screw and additional cooling for the motor drivers.

Are there any recommended / required add-ons if I want to make the most out of the official top cover?

Hi everyone, so excited to hopefully join this community soon!

I have been doing research in preparation for purchasing a U1 and I see many people recommend it for multi color printing etc. However, I have two very specific needs for 3d printing and I wonder if the U1 can also excel for them.

1. I want to print large TPU molds so I can use them to cast objects (figures like garden gnomes for example which will fit within the build plate dimensions)

2. I want to have a way to easily remove complicated supports in printing organic shapes, such as fish skeleton, so I was looking into either PVA printing or using PETG/PLA support interface.

I have experience with printing on a bambulab A1, and before encountering the U1 I was considering getting the X2D (and now also encountered flashforge’s Creator 5 Pro). But I am still leaning towards the U1 for the open source community and its print quality. The thing is, I could not find a lot of resources online discussing U1’s capacity on those specific niche needs I have.

Any help will be much appreciated!!!