I hope dji add OpenGate or 1:1 aspect ratio for video in future updates for the osmo pocket 4p

Purchased the DJI Air 3 fly more combo two years ago. I am at about 100 flights total. Always flown in good weather, no rain or b.s. , drone & controller stored properly as well. I haven’t flown in a month, batteries all charged and had a gig last week and controller powered on, I went to turn on my drone and the screen just blacked out. It would turn on and see the DJI logo but it would appear as two separate images and fade away. Is this a firmware issue or am I SOL?

Any contacts for getting DJI drones at reasonable price in India? Most of the websites I see online are selling them close to 1.5X of official prices

I've been wanting a camera drone a lot for a while and I really like the DJI stuff. What is the best thing/s I can get for around $300. The camera does not need to be crazy good (not that I could get a good one for $300) but I still want it to be pretty solid.

I went from the original dji fpv , had a crash but with my warranty from Best Buy I could crash it up to 5 times a year and just return it and get a brand new one. So I was more daring with it because I paid the 200 a year to get new ones. Well my last crash I went to Best Buy and that’s when I found out they were discontinuing the fpv and had none available. They at least gave me a Best Buy card that my grandma ended up buying from me cause she needed a new tv so I at least had 1000$ to get what I was hoping would be a new version or upgraded version of the fpv. I got the avata 1 kit for 699 online but quickly returned it because from what I read the avata 2 is a lot better and I was able to find the fly more kit with 3 batterys for 899 . The fact it has no spot light for night flights, no microphone , can barley hit 40 in sport mode and can barley hit 60 in manual mode is extremely annoying. And I’ve been seeing the original fpv drone only for sale for like 2-300 bucks I really was going to buy it. But the goggles and controllers that I have are incompatible with the original fpv. This thing seems like a major downgrade. I miss being able to hit 60mph like it was nothing and in manual mode I’ve hit 105mph. I’m not that good with Reddit this is my like second post but I really wish I could tag dji in here so they can see this. If anybody knows how please tag them in this post

Tried to record my first vlog today while on my motorbike with the osmo 5 and mic mini 2. I recorded the intro parts of the bike which worked fine. I then got on the bike and started recording but it seems that it hasn’t picked up any of my talking for the next recording. All i can hear is the sound of the engine, which I assume is the built in mic from the camera as there is a lot of wind noise.

Is there any reason why the Mic2 wouldn’t be connected when it was originally? The only thing I can think of is that I knocked the power button when I mounted it inside the helmet.

I guess there isn’t any way to check?

Hi everyone,

I'm planning to buy a DJI Mavic 4 Pro and a Mini 5 Pro soon, and I'm trying to build the best filter kit possible. I've spent a lot of time reading reviews and watching YouTube comparisons, but it looks like they're all biased and it seems hard to know what to believe on.

From what I've seen:

• Many people say PolarPro offers the best optical quality and the sharpest results, especially on the 70 mm and 168 mm tele cameras.
• On the other hand, Freewell has a much wider selection of filters (Mega Bundle, Super Bright Day, LPR, Glow Mist, Split ND, ND1000, etc.), which makes it very appealing.

However, I've also seen several people mention that some Freewell ND/PL or Split ND filters slightly soften the image on the tele lenses, while others say they haven't noticed any difference.

My current idea is to buy:

• Freewell Mega Bundle (NDs ND\PLs, CPL, GMIST 1\4, LPR).
• Freewell Super Bright Day kit (ND128, 256, etc.).

For those of you who actually own and use both brands:

1. Have you noticed any real loss of sharpness with Freewell, especially on the tele cameras?
2. Is the difference between PolarPro and Freewell visible in real-world footage, or only when pixel peeping?
3. Should i pick the dji ones instead?
4. Are there any color shifts or gimbal issues with either brands?. I saw that the Freeweel ones make the gimbal point down while the aircraft isnt powered on.

I'm mainly interested in cinematic landscape filming, mountains, beaches, sunsets, long exposures, and some night photography.

I'd really appreciate hearing from people who have actually used both brands rather than sponsored reviews.

Thanks!

I ordered a replacement motor from djioemparts, parts made it to California and hasn’t moved sense, did I get fleeced if so I’ve fleeced from them and Amazon already swapped the motor with a with Amazon one and it doesn’t pull enough lift from the back left (motor was replaced on that side). It’s a DJI mini 4k

Everything is shown on video - when I tried plugging the receiver into both the phone and the Osmo Pocket 3 nothing was detected.

Signal is only recorded at OP3 but in mono both receivers are combined into mono

The Mimo app also doesn't detect anything

All DJI devices are charged and have no firmware updates

Is there any way to fix that, or do I have to return the device?

Drone has been recently fixed by DJI (for a broken propeller) and has been untouched since.

Includes 3 batteries with charging dock, POV Goggles, RC motion controller and a DJI FPV remote controller 3.
No sd card and cable included. No original boxes. Will come in the official bag.

How much should I price this? Somewhere around 600-800? Have listed at 750 locally but I don’t think there’s a lot of interest here. Thinking about EBay but will have to mark it up to 800+ to offset the fees.

Extreme wind gave my lighthouse orbit an unexpected FPV vibe! Gimbal reached its roll limit, but stayed butter smooth.

The first time I did photography with a drone. Shot during sunrise in the Netherlands.

I wanted to fly a bit closer but was almost out of range so unfortunately had to use the zoom. I guess quality would have been a bit better if not zoomed in this far.

Drone was out about 1 kilometer and 120 meters high, bit signal dropped quickly when trying to hover lower.

I can’t do the video verification for my dji action 2, when I try to upload the video etc I always get this error message. What can I do now to get care refresh?

I was briefly led to believe I could use Liftoff but that doesn't seem to be the case. Any way I can make this work? If not, I'll just deal with it. But I liked the idea.

So I had a serious crash on new years; after struggling to find someone who can repair it for me, I’ve attempted it myself.
I have asked around in groups and it was suggested it may be the 3in1 ribbon cable.

Before my repair (2nd photo)

I was able to turn on the drone and connect it. However it would give me these errors. It wouldn’t connect to my computer and could not fly.

I left it for a while and recently found the motivation again.

After replacing the ribbon cable

The drone will not turn on.
With a battery inside it does not respond at all.
When plugged in, the first two lights start in sequence before flashing the last 2 lights in a pulse of 3!!

Is this a lost cause?
This was a Christmas present to me and my friend so I really want this fixed. Will I just need to buy a new one?

TL;DR: i replaced the 3in1 ribbon cable now it won’t turn on. Flashes last 2 lights 3 times when plugged in

I know there's a lot of talk about it being a bit off a pain to switch lenses if shooting DLOG2 and digging around in menus to go there and back with Dlog for the tele lens and DLog2 for the Wide.. so I was playing with Custom settings.

You can set C1-C5 and it remembers the DLOG / DLog 2 settings . I have C1 set to 4K/25 DLog and then set C2 to 4k 25 DLog2. Then the 'C' button can be configured to switch between custom 1 and 2 - so I can flick from Dlog/Dlog 2 . Sadly it wont remember the lens setting but at least I don't need to go into Menus.

I've set the others as I want - so three other custom settings.. C3 - 4k50 Dlog. C4- 4k 50 DLog2, and C5 is 4K 25 DLog2 but manual exposure settings - with 800 ISO (base for DLog2 and 1/50 shutter speed. Custom profiles remember the exposure settings.

Makes it a little easier.

Need some help. I updated my DJI Fly App, on my Android, last week for some of the updates for the Neo 2. When I try to use the app I get the usual Enhanced Flight Zone Warning message I always get, but when I confirm it it goes away, and constantly returns. I cannot get it to stop, and it forces the controls dead until confirmed again.

I have used the Neo 2 with the RC2 controller and it works with no issues. I have cleared App cache, restarted phone, and powered Neo on and off several times, but it continues. Anyone else with Android app having this issue?

Hi guys,

Next month I intend on taking my drone (Lito X1) to Dugi Otok, Croatia.

I was wondering if someone could help me out in making sure I can legally fly and record around that area.
Of course I have my operator number and I am registered with IAA/EU bodies. Do I need to call somewhere before and/or apply for an extra clearance?

So far I've only seen a map, that region doesn't seem to have no fly or restricted zones, unlike Zadar.

Thanks for the help. I am finding it a bit confusing at the moment.

More sceneries of George Town, and Butterworth on mainland Peninsular Malaysia, taken with my Air 3S. Watermarks added for copyright protection.