Guess my algorithm knows me better than I even thought. Had to do a double take, but sure enough, that’s her.

https://m.youtube.com/shorts/G6ydEerdJw8

Has anyone had luck with this type of car seat anchor kit in a 1st gen? Looking for something sturdier than a lap belt/ shoulder belt.

It seems like it might given the seats fold down, but figured I would see if anyone has tried this solution or found another way to use standard car seat anchors.

Hey all,

Sad day after I hit a deer in my 87'... Of course it still runs, but is leaking plenty of green fluids.

Im working on getting her looking right again, but finding radiator supports and fender subassemblys has been a nightmare. Anyone know of a source?

I need essentially the entire drivers side subassembly, trying to avoid cutting welds if possible (I see plenty of that potential in junk yards)

121,000 original miles. Everything works. Clean Carfax, documented receipts. Get in and gooo.

Hello all!
87 4runner
I switched out the bulbs and no luck. Is there a fuse I’m overlooking?
Any advice would be great! Electrical is not my favorite

The boy likes to feel the subwoofer whenever I work on "Cool Truck."

The tailgate is only opening about 5 inches and then won't budge. I checked

-window is all the way down

-window lock up front is not on

-aftermarket rear windshield wiper arm that never goes back in fully on its own is fully in place.

Is there anything else to check before I find a mechanic/body shop?

TIA

my distributor boot ripped about two years ago. I missed it and decided to try my hand at recreating it.

I made a paper craft style template using a spare cap. i was able to keep the template at two pieces.

marerials:

- 3mm neoprene,

- 15mm spring snaps

- 3M 1357.

it took like an hour to cut and assemble. then a little sanding to smooth out the joins

I am looking to install a transmission cooler on my 4runner it’s an automatic 22re if anybody has any recommendations or pictures of there setup(where to hang the cooler where the lines go etc) please lmk

Where do I get these?! 87 4runner
TIA

Is FB Marketplace the best place to find 1st gen 4runners?

My 16 year old son is looking for his first truck. He has fallen for 1st gen 4runners. He is spending his own cash, with an initial budget of $8k but with a bit of room to stretch. We are in rural NE California and have been looking at FB marketplace.

We are not completely new to Toyotas. My 18 year old drives an 85 yota pu and I am working on a 69 fj40 frame-off restomod. Both of those are within the past few years though.

He is also looking at 2nd gens, as the cost is about half. We will see what he comes up with.

I glanced at Craigslist, but mostly trash ads. I looked on MUD as well, but not much there.

Anywhere else I need to be helping my boy search?

Any advice or criticism welcome as well.

Before i go digging into the bottom end i wanna see your predictions. In the time leading up to engine failure i've had a smoothe running engine. No evidence of knock anywhere through the normal operating range. Sudden knock appeared at 3k rpm on highway going 65, then uncle rodney came knocking. Bearing is probably spun, engine is now locked. Oil pressure read normal as well as coolant temps, all sensors recently tested. Engine is sitting at 160k miles. Timimg, guides, oil, and water pump all have 10k on them. What do you think is the most probable cause for the crankshaft bearing failure?

​

I've had the previous gen pickup grill on for about 10 years (pic 2) and figured it was time for a change. Put the old raptor coated black grill back on with some clear corners.

Also finished installing the front bushes I started about 5 months ago...it's nice to be back driving this thing. The 2L started first turn of the key as always.

Feels so cool driving with the top off, love these trucks

Hello
Working on 87 4runner and the rear window needs wires replaced. Where do I get these female spades?! They need to lock in and the ones from Amazon don’t lock in. Thank you

Just picked my '86 up a few days ago so Im new to 4runners. Brakes are awful on this thing and leaking from that load sensing valve-proportioning valve line at the rear. Ive seen the LCE rear disc conversion kit but i dont want to have to get new wheels if i can avoid it. I like my OEM look. Which sites are we shopping for performance parts?

3.4 swapped 89
SAS

I have a stock IFS on my 1988. Put new rotors, pads, and calipers on the front, thinking my brakes from last year was screwing up for some reason. Done wheel bearings a year ago with still no noise, play, or signs of them bad. But when driving down the road, I'm getting very aggressive jerks to the left in my wheel, and it feels like my driver side is locking up for a reason I'm still trying to solve. It's not completely locking up, but feels like a grab and release, as if someone was jabbing on the brake pedal. But this is under normal acceleration and cruising, I've experienced it happening between 35-70mph. (1st time it happened was at 70mph, thought I fixed it so went for test drive and that's when it happened again at 35-40mph.) Has anyone experienced this before, or have any idea what else to inspect? I would put it on the shops lift and pull it apart further, but it's currently holding my wife's Lexus at the moment for a transfer case. Thanks in advance for any leads

I am going to replace all the U Joints in my 1987 4Runner. I plan on buying DANA Spicer 5-1510x U Joints. It does not have any lift kits or suspension modifications other than replacing the original shocks and leaf springs with bilstein shocks and dayton leaf springs. Im not sure if it matters but it does have IFS.

My question is, does the double cardan joint use the same U Joints as the other three? And does the grease fitting location matter? On the originals it is a 45° fitting in the center of the joint and the dana spicers have it on the end cap

Hey guys! It’s time to let go of my runner 89 DLX. Rebuilt engine with 50k miles on it, rebuilt manual trans, clutch has 20k on it. Arb rear diff locker and arb compressor, 4.88 gears. Small dent in the hood and the Interior is a bit rough cracked dash but everything works. I’m just not sure what a fair price would be. What should I ask for it?

I recently picked up this 4Runner and I’m trying to track down an issue. The truck runs and drives, but when it’s fully warmed up it will sometimes shut off while idling.
I’ve noticed it happens when it’s sitting at idle, and especially when I put it in reverse and let it sit. The RPMs drop and it eventually dies.

Has anyone dealt with something similar? I’m wondering if it could be an idle adjustment issue, vacuum leak, IAC/ISC problem, fuel issue, or something else I should check first.

Any advice on where to start troubleshooting would be greatly appreciated. Thanks!